• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.5B
• /
• pp.415-429
• /
• 2011

Quantitative evaluation indexes for flood control effect of a multi-purpose reservoir used widely in Korea are the discharge control rate, reservoir release rate, reservoir storage rate, and flood control storage utilization rate. Because these indexes usually use and compare inflow, release, and storage data directly, the uncertainties included in these data are not considered in evaluation process, and the downstream flood control effects are not assessed properly. Also, since the acceptable partial failure in a design of water resources system is not considered, the development of a new flood control effect evaluation index is required. Fuzzy set theory is therefore applied to the development of the index in order to consider the data uncertainty, the downstream flood control effect, and the acceptable partial failure. In this study, the flood control effect of a multi-purpose reservoir is evaluated using the flood control effect index developed by applying fuzzy set theory. The Chungju reservoir basin was selected as a study basin and the storm events of July, 2006 are used to study the applicability of the developed index. The related factors for flood control effect are fuzzified, the acceptable failure region is divided from the system state to evaluate the flood control effect using developed flood control effect index. The flood control effect index were calculated by applying to the study basin and storm events. The results show that the developed index can represent the flood control effect of a reservoir more realistically and objectively than the existing index.

• The Journal of Advanced Prosthodontics
• /
• v.4 no.2
• /
• pp.76-83
• /
• 2012

PURPOSE. Zirconia has been used in clinical dentistry for approximately a decade, and there have been several reports regarding the clinical performance and survival rates of zirconia-based restorations. The aim of this article was to review the literatures published from 2000 to 2010 regarding the clinical performance and the causes of failure of zirconia fixed partial dentures (FPDs). MATERIALS AND METHODS. An electronic search of English peer-reviewed dental literatures was performed through PubMed to obtain all the clinical studies focused on the performance of the zirconia FPDs. The electronic search was supplemented by manual searching through the references of the selected articles for possible inclusion of some articles. Randomized controlled clinical trials, longitudinal prospective and retrospective cohort studies were the focuses of this review. Articles that did not focus on the restoration of teeth using zirconia-based restorations were excluded from this review. RESULTS. There have been three studies for the study of zirconia single crowns. The clinical outcome was satisfactory (acceptable) according to the CDA evaluation. There have been 14 studies for the study of zirconia FPDs. The survival rates of zirconia anterior and posterior FPDs ranged between 73.9% - 100% after 2 - 5 years. The causes of failure were veneer fracture, ceramic core fracture, abutment tooth fracture, secondary caries, and restoration dislodgment. CONCLUSION. The overall performance of zirconia FPDs was satisfactory according to either USPHS criteria or CDA evaluations. Fracture resistance of core and veneering ceramics, bonding between core and veneering materials, and marginal discrepancy of zirconia-based restorations were discussed as the causes of failure. Because of its repeated occurrence in many studies, future researches are essentially required to clarify this problem and to reduce the fracture incident.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.4
• /
• pp.490-494
• /
• 2019

Abutment teeth supporting removable partial denture could be faced a number of problems including development of dental caries. If the existing removable partial denture is in clinically acceptable state and the patient does not want to replace the existing removable partial denture, then a new prosthesis for abutment teeth need to be made. The procedure of fabricating a new prosthesis of abutment teeth for existing removable partial denture is complicate and technically challenging. To fabricate the abutment crown, the original cast of patient obtained before any complication to the abutment teeth is required. The original cast should also contain teeth other than the abutment teeth as a reference point. Once the cast is prepared, CAD/CAM could be used to produce retrofitting prosthesis effortlessly and efficiently. This clinical report presents fabricating a crown to fit existing removable partial denture using CAD/CAM for a patient with post and core failure and dislodged prosthesis. The prosthesis had high stability with minimum adjustment yielding satisfying result.

• Korean Journal of Metals and Materials
• /
• v.50 no.2
• /
• pp.136-145
• /
• 2012

Resistance spot welding of TRIP780 steels was investigated to enhance understanding of weld fracture mode after tensile shear testing (TST) and L-shape tensile testing (LTT). The main failure mode for spot welds of TRIP780 steels was partial interfacial fracture (PIF). Although PIF does not satisfy the minimum button diameter (4${\surd}$t) for acceptable welds, it shows enough load carrying capacity of resistance spot welds for advanced high strength steels. In the analysis of displacement controlled L-shape tensile test results, cracks initiated at the notch of the faying surface and propagated through the interface of weldments, and finally, cracks change path into the sheet thickness direction. Use of the ductility ratio and CE analysis suggested that the occurrence of PIF is closely related to high hardness and brittle welds, which are caused by fast cooling rates and high chemical compositions of TRIP steels. Analysis of the hold time and weld time in a welding schedule demonstrated that careful control of the cooling rate and the size of a weld nugget and the HAZ zone can reduce the occurrence of PIF, which leads to sound welds with button fractures (BFs).

• International Journal of High-Rise Buildings
• /
• v.9 no.2
• /
• pp.127-154
• /
• 2020

Disproportionate collapse triggered by local structural failure may cause huge casualties and economic losses, being one of the most critical civil engineering incidents. It is generally recognized that ensuring robustness of a structure, defined as its insensitivity to local failure, is the most acceptable and effective method to arrest disproportionate collapse. To date, the concept of robustness in its definition and quantification is still an issue of controversy. This paper presents a detailed review on about 50 quantitative measures of robustness for building structures, being classified into structural attribute-based and structural performance-based measures (deterministic and probabilistic). The definition of robustness is first described and distinguished from that of collapse resistance, vulnerability and redundancy. The review shows that deterministic measures predominate in quantifying structural robustness by comparing the structural responses of an intact and damaged structure. The attribute-based measures based on structural topology and stiffness are only applicable to elastic state of simple structural forms while the probabilistic measures receive growing interest by accounting for uncertainties in abnormal events, local failure, structural system and failure-induced consequences, which can be used for decision-making tools. There is still a lack of generalized quantifications of robustness, which should be derived based on the definition and design objectives and on the response of a structure to local damage as well as the associated consequences of collapse. Critical issues and recommendations for future design and research on quantification of robustness are provided from the views of column removal scenarios, types of structures, regularity of structural layouts, collapse modes, numerical methods, multiple hazards, degrees of robustness, partial damage of components, acceptable design criteria.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.2
• /
• pp.171-175
• /
• 2019

Mandible with severe alveolar bone atrophy poses a significant challenge in terms of reproducing clinically acceptable anatomy for a removable prosthesis. To overcome this potential complication, altered cast impression technique is often recommended to capture accurate and functional gingiva tissues. It becomes possible to get proper anchors functional impression by placing 2 implants crowns which were impossible in previous implant overdenture impression technique. In this case, an 80-year old female patient with severe mandibular ridge atrophy was treated with an implant-assisted removable partial denture with two implant crowns on the canine area. An altered cast impression was taken with an individual tray on a metal framework of removable partial denture on both posterior edentulous areas. The patient was satisfied with the final prosthesis after failure of 2 previous prostheses. Clinician had a difficult time to manage disabled patient and patient were suffered with ill-fitting denture due to inaccurate impression in conventional overdenture condition. The oral rehabilitation was completed with placing 2 implants as proper anchor.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.46 no.6
• /
• pp.417-421
• /
• 2020

Objectives: The purpose of this paper is to introduce an effective technique to easily obtain adequate amounts of keratinized gingiva and vestibular depth. Materials and Methods: Free gingiva (vertical height 10 mm) was harvested on the palatal mucosa and a partial thickness flap was elevated on the recipient site with same width as the free gingiva graft. After a conventional suture, a titanium mesh covered the graft and was fixed with miniscrews. Titanium mesh was removed 4.1±2.5 weeks after surgery. The amount of keratinized gingiva and vestibular depth was measured at the final follow-up. Results: Nine patients (males 4, females 5; 53.9±14.1 years) who underwent bone graft surgery before vestibuloplasty were included. No free gingival graft failure or complications were encountered in any of the patients. The relapse rate for vestibular depth (23.3%) was lower than that for keratinized gingiva (48.3%) after 34.4±14.4 months (P=0.010). Conclusion: Vestibuloplasty with a free gingival graft using titanium mesh could be achieved with an acceptable amount of keratinized gingiva and an appropriate vestibular depth around dental implant.

• Radiation Oncology Journal
• /
• v.31 no.4
• /
• pp.206-215
• /
• 2013

Purpose: Re-irradiation (re-RT) is considered a treatment option for inoperable locoregionally recurrent head and neck cancer (HNC) after prior radiotherapy. We evaluated the efficacy and safety of re-RT using Helical Tomotherapy as image-guided intensity-modulated radiotherapy in recurrent HNC. Materials and Methods: Patients diagnosed with recurrent HNC and received re-RT were retrospectively reviewed. Primary endpoint was overall survival (OS) and secondary endpoints were locoregional control and toxicities. Results: The median follow-up period of total 9 patients was 18.7 months (range, 4.1 to 76 months) and that of 3 alive patients was 49 months (range, 47 to 76 months). Median dose of first radiotherapy and re-RT was 64.8 and 47.5 $Gy_{10}$. Median cumulative dose of the two courses of radiotherapy was 116.3 $Gy_{10}$ (range, 91.8 to 128.9 $Gy_{10}$) while the median interval between the two courses of radiation was 25 months (range, 4 to 137 months). The response rate after re-RT of the evaluated 8 patients was 75% (complete response, 4; partial response, 2). Median locoregional relapse-free survival after re-RT was 11.9 months (range, 3.4 to 75.1 months) and 5 patients eventually presented with treatment failure (in-field failure, 2; in- and out-field failure, 2; out-field failure, 1). Median OS of the 8 patients was 20.3 months (range, 4.1 to 75.1 months). One- and two-year OS rates were 62.5% and 50%, respectively. Grade 3 leucopenia developed in one patient as acute toxicity, and grade 2 osteonecrosis and trismus as chronic toxicity in another patient. Conclusion: Re-RT using Helical Tomotherapy for previously irradiated patients with unresectable locoregionally recurrent HNC may be a feasible treatment option with long-term survival and acceptable toxicities.

• Radiation Oncology Journal
• /
• v.9 no.1
• /
• pp.59-63
• /
• 1991

Thirty-one patients with previously untreated and locally advanced nasopharyngeal cancer were retrospectively reviewed for comparing the effects of radical radiotherapy alone with that of combining chemotherapy and radiotherapy from 1983 to 1989 at Kangnam 51. Mavy's hospital.23/31 were evaluable for recurrence and suwival. There were 8 patients for stage III, and 15 patients for stage IV. Eleven patients were treated with radical radiation therapy done (arm I). Twelve patients were given 1~3 courses of cisplatin-5FU or cisplatin-bleomycin-vincristine prior to radiation therapy (arm II). The two arms were comparable in patient characteristics Of 11 radiotherapy Patients, complete response was 55%(6/11) and Partial response 45%(5/11). Among 12 patients after induction chemotherapy, complete response was 25%(3/12) and partial response 75%(9/12). After subsequent radiotherapy, complete response was increased to 83%(10/12) and partial response was 17%(2/12). Treatment failure was 30%(local recurrence; 3/11, and regional recurrence; 1/11) in arm 1 and 33% (local recurrence; 1/12, regional recurrence; 2/12 and distant metastasis; 1/12) in arm ll . There was no significant difference in survival between arm I and arm II (p> 0.05). The toxicities of treatment were acceptable. More controlled clinical trials must be completed before acceptance of chemotherapy as part of a standard radical treatment for locally advanced nasopharyngeal cancer.

• Archives of Plastic Surgery
• /
• v.32 no.2
• /
• pp.175-182
• /
• 2005

Skull base tumors have been determined inoperable because it is difficult to accurately diagnose the extent of the involvement and to approach and excise the tumor safely. However, recently, the advent of sophisticated diagnostic tools such as computed tomography and magnetic resonance imaging as well as the craniofacial and neurosurgical advanced techniques enabled an accurate determination of operative plans and safe approach for tumor excision. Resection of these tumors may sometimes result in massive and complex extirpation defects that are not amenable to local tissue closure. The purpose of this study is to analyze experiences of skull base reconstruction and to evaluate long term survival rate and complications. All cranial base reconstructions performed from July 1993 to September 2000 at Department of Plastic and Reconstructive Surgery of the Seoul National University Hospital were observed. The medical records were reviewed and analysed to assess the location of defects, reconstruction method, existence of the dural repair, history of preoperative radiotherapy and chemotherapy, complications and causes of death of the expired patients. There were 12 cases in region II, 8 cases in region I and 1 case in region III according to the Irish classification of skull base. Cranioplasty was performed in 4 patients with a bone graft and microvascular free tissue transfer was selected in 17 patients to reconstruct the cranial base and/or mid-facial defects. Among them, 11 cases were reconstructed with a rectus abdominis musculocutaneous free flap, 2 with a latissimus dorsi muscluocutaneous free flap, 1 with a fibular osteocutaneous free flap, 2 with a scapular osteocutaneous free flap, and 1 with a forearm fasciocutaneous free flap, respectively. During over 3 years follow-up, 5 patients were expired and 8 lesions were relapsed. Infection(3 cases) and partial flap loss(2 cases) were the main complications and multiorgan failure(3 cases) by cancer metastasis and sepsis(2 cases) were causes of death. Statistically 4-years survival rate was 68%. A large complex defects were successfully reconstructed by one-stage operation and, the functional results were also satisfactory with acceptable survival rates.