• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.3 s.96
• /
• pp.103-108
• /
• 1999

A problem in the grinding with a small diametric wheel is the decrease of wheel speed. In order to resolve this problem, an accelerating unit which increases the wheel speed is recommended. In this paper, the accelerating effect of an accelerating unit has been investigated through the side-cut grinding experiments performed with a vitrified bonded CBN wheel in a machining center(MC). The static stiffness, normal force, and machining error were measured in the experiments. As the accelerating unit is attached on the column of machining center, the static stiffness of tool system is largely decreased. But as the wheel speed increased by the accelerating unit, this problem is overcome and machining efficiency is improved. The lesser the quill stiffness was, the higher the accelerating effect became.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.731-736
• /
• 2003

Alkali silicate system has wide application to accelerating admixture for shotcrete, but it has several problems that decrease long-term strength and delay setting time. So alkali-free system was gradually focused on accelerating admixtures for shotcrete due to its environmental property. The aim of this study is to investigate effect of alkali-free accelerating admixtures on aluminum sulfate system containing diethanolamine or acrylic acid etc. The alkali-free accelerating admixture has better properties than silicate system accelerating admixtures on compressive strength and low pH as shotcrete. Especially, the compressive strength of alkali-free accelerating admixture containing diethanolamine was increased about 10% compared with the value of ordinary portland cement.

• Journal of the Korean Applied Science and Technology
• /
• v.12 no.1
• /
• pp.81-86
• /
• 1995

Some weight loss accelerating agents, dodecyltrimethylammonium chloride(DTAC), dodecyltrimethylammonium bromide(DTAB), dodecyldimethylammonium chloride(DDBAC), polyoxyethylene(2) dodecylbenzylammonium chloride(PDBAC), and 1-(2-hydroxyethyl)-1-benzyl-2-undecylimidazolinium chloride(AEUIC), were synthesized. As a result of weight loss treatment of the weight loss accelerating agents with NaOH to PET fiber, the increase of weight loss was the order of PDBAC > DDBAC > DTAC > DTAB > AEUIC. Among the weight loss accelerating agents, AEUIC hardly showed weight loss effect, and it was separated into two layer in the NaOH solution at the treatment concentration above 6g/L, but POBAC showed good weight loss effect of 21% that approach almost to a theoretical weight loss, 21.6%, at the concentration above 8g/L.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.17 no.1
• /
• pp.13-28
• /
• 2022

Korean Government Budget Supports for startups have been spiked and resulted in increasing the number and scaling up Startup Accelerating managers. It have skyrocketed the strong demand for their qualified roles. However, unclear role description and gap between required role and their capability have discouraged startup manager's self-efficacy resulted in declining their full commitment and causing poor role performance. The focus of this research falls on empirical analysis to the effect of startup accelerating manager's capability characteristics on their full commitment and performance to start-up support groups. This research is expected to deliver diverse policy alternatives to build up manager's core competencies to accelerate their self-efficacy leading their full role commitments and finally pushing up policy performance. In addition, this research will found more strong literature review for the following researches in this emerging fields. This research is brought four highlighting results with respect to four research problems. First, it propose proper concept of startup accelerating manager based upon its legal entitlement. Second, it drive required core competencies of manager for successful their accountability. Third, it analyze the unique features of startup accelerating manger's capabilities against business incubation manger. Fourth, it empirically analyze in coming with government startup funding, the effect of self-efficacy including employment status, job environment, etc. on their organizational commitment and job performance. This research reveal the required unique core competencies of manger into founder sourcing ability, project managing ability, startup proving and pivoting ability, consulting ability for successful investment raising. As of this empirical research results, First, manager's ability have positively effect on their job performance, full commitment, and self-efficacy. Second, self-efficacy have a mediating effect on manager's ability, job performance, full commitment. This research derive key policy implication of requiring to build up more accelerating ability, of manager from the basics to advance level by customized and algorithm based traing program. This accelerating ability buildup program will not only surge self-efficacy of manger resulting in making full commitment and better job performance, but also devote to categorizing the unique new feature and position of manger as seed investment and supporter.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.1
• /
• pp.105-111
• /
• 2020

The present study examined the effect of the silica-based accelerating agents on the setting time and compressive strength gain of biomimetic glycocalix coating materials that has been developed for protecting the substrate of concrete exposed to chemical and microbiological attacks. The accelerating agent contents varied from 10mL/L to 40mL/L in the mixtures of glycocalix coating materials determined for shotcrete and lining techniques. Test results showed that the setting time of coating materials containing accelerating agents was affected by the contents of the bacteria carrier. When the accelerating agent content was 40mL/L, the final setting time was 80 minutes for shotcrete mixtures and 318 minutes for lining mixtures. Meanwhile, the compressive strength gain of coating materials with accelerating agents tended to be lower than that of counterpart materials without accelerating agents.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.257-258
• /
• 2009

This study is about the correlation between KS F 2711 and NT Build 492, and about the effectof hydration accelerating admixture. For this study, various types of binder are tested.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.213-217
• /
• 1997

In this study, three-dimensional inite element model was developed and analyzed or DAI using ABAQUS. To verify the developed FE model, simulated results were compared to experimental results of human cadaver by Nahum et. al. (1977). The effect of acceleration pattern and accelerating duration time or DAI was analyzed by means of maximum shear stress and pressure distribution. DAI was favored or angular acceleration rather than linear acceleration, and occured in brain stem, pons and midbrain easily as accelerating duration time was increased.

• 한국전산유체공학회:학술대회논문집
• /
• 2001.05a
• /
• pp.121-126
• /
• 2001

An accelerating flow field through a compressor cascade is studied numerically by unsteady computational simulation. The two-dimensional Navier-Stokes equations for compressible flow is used for the study of unsteady high incidence angle flow, with preconditioning scheme to cover the wide range of Mach number and $\kappa-\omega$ model for the turbulent viscous flow analysis. A DCA(double circular arc) compressor blade is accelerated artificially in this study to understand the unsteady effect by comparing the present results with the existing steady-state experimental and computational results. Also, the accelerating flow field during the starting phase of gas turbine is studied with actual experimental data for the understanding of flow field and performance characteristics at off-design condition.

• Structural Engineering and Mechanics
• /
• v.6 no.6
• /
• pp.613-632
• /
• 1998

A coupling system for a structure accelerating through a fluid is considered which is composed of the structure and the fluid in a finite surrounding volume. Based on the variational principle, the finite element equations of hydrodynamic pressure and structural elastic vibration are deduced. A numerical method is given for the dynamic character and response of the structure which takes the coupled fluid into account. The effect of axial inertial forces on the dynamic character and response of rapidly accelerating structures is also considered.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.3
• /
• pp.33-39
• /
• 1995

To accelerate the cure of phenolic resin adhesives for plywood, the complexation with melamine resin and the addition of cure-accelerating agents were discussed. The hot-pressing temperature and time of phenol resin could be decreased by complexation with melamine resin. but the wet glue-joints strength of phenol melamine resin was lower than that of ordinary phenol resin in case of plywood using spruce veneer at core layer. Among the tested cure-accelerating agents. the sodium carbonate showed the greatest effect on shortening gelation time of phenolic resin. In addition, in the manufacturing scale test, the hot-pressing time of phenol resin with the addition of 5 parts sodium carbonate could be shortened about 20% compared with ordinary phenol resin which had same glue-joints properties.