• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.220-221
• /
• 2014

The various type of polymer such as silicone, modified silicone, polyurethane, etc are being used in domestic construction sealant market. Once sealant is installed in building, it should maintain their specific performances such as preventing moisture, rain, air, etc against environment conditions for several decades. In this study, weather resistance as per polymer type of sealant has been evaluated using QUV accelerated weathering tester. As a result, weather resistance of silicone is highest and modified silicone is lowest in the comparison of other type of polymer.

• 한국도로학회논문집
• /
• 제16권2호
• /
• pp.35-41
• /
• 2014

PURPOSES : Surface treatment is a favorable method in the pavement preventive maintenance. This study (Part I) aimed to develop the low viscosity filling material for waterproof characteristics and high penetrable and weather resistance, and a series of companion study (Part II) presents the coating characteristics and performance analysis using field and lab tests. METHODS : Hydrophobic characteristics of the advanced surface treatment material are observed and measured the filling depth and the permeability for sand and asphalt pavement specimen using the water absorption test and permeability test, X-RAY CT test. Color difference for the weather resistance using ultraviolet ray accelerated weathering test is compared with asphalt pavement specimens. RESULTS : The developed material shows the decreased water absorption and increased impermeable effect because of the hydrophobic characteristics. It is found that the filling depth is about 6mm and weather resistance is better than asphalt pavement specimen. CONCLUSIONS : The advanced hydrophobic - low viscosity filling treatment material is developed in this study (Part I) to improve the waterproof characteristics and high filling capacity and weather resistance for the pavement preventive maintenance.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.243-247
• /
• 2003

The effect of accelerated weathering(UV) on three type of ethylene propylene diene monomer(EPDM) composite used for higher voltage insulator were investigated by weather-emoter. For weatherability of EPDM composite, surface resistance, dielectric breakdown strength, change of contact angle, surface composition were measured according to UV accelerated weathering time. From the resort of the measurement of surface resistivity, contact angle of EPDM composite decreased and showed chalking and cracking phenomenon when UV weathweing time was for 1500 h and 2000 h. The analysis of surface atomic composition indicated that surface aluminiu(Al) content was detected due to chalking phenomenon after 1500 h of UV weathering, Oxygen content of all composite increased due to the oxidation.

• 한국광물학회지
• /
• 제32권4호
• /
• pp.259-271
• /
• 2019

채색 문화재 및 전통회화의 적색, 황색 안료로 사용되는 진사, 웅황, 그리고 자황의 광물학적 특성을 분석하고 촉진내후성 평가를 통한 안정성을 평가하였다. 진사는 시료명을 JB, JS로 하였고, 웅황과 자황은 각각 UH, JH로 하였다. 광물학적 특성 평가 결과 JB, JS는 cinnabar (HgS)로 주구성 광물이 확인되었고, 품위에 따른 화학성분에 차이를 보이지 않았다. UH와 JH는 각각 realgar (AsS), orpiment (As₂S₃)로 주구성 광물이 확인되었다. 편광현미경 관찰 결과 쪼개짐, 색상 등 편광학적 특성을 통해 모두 천연적으로 생성된 무기안료임을 알 수 있었다. 특히 진사의 경우 성분분석으로는 천연적으로 생성된 안료인지 인공안료인지 판별이 쉽지 않은데 편광현미경을 통해 천연안료가 가지는 입자특성 및 쪼개짐을 확인하였으며, 열적 반응 특성을 확인하였다. 열분석 결과 JH가 UH에 비해 유리전이 온도가 높고 안정한 것을 확인하였다. 촉진내후성 평가 결과 진사, 웅황 그리고 자황은 모두 광열화에 의한 색변화가 크게 나타나며, 진사는 최종적으로 흑색(blackening)되고 웅황과 자황은 밝은 노란색으로 변한다. Meta-cinnabar로 예상되는 JB가 cinnabar인 JS에 비해 흑화현상이 더 빨리 촉진되었으며, UH (realgar)는 광조사에 의해 arsenolite (As₂O₃)로 변하는 것을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1404-1406
• /
• 1998

The outdoor polymeric insulating materials such as silicone rubber, ethylene propylene diene monomer(EPDM), ethylene vinyl acetate(EVA) and epoxy are aged by various natural environment with the long-term performance in outdoor. In this paper, the effects of UV-ray on surface of silicone rubber were investigated by using the weather-Ometer. The accelerated aging stresses were simulated by UV radiation. high temperature and humidity as well as water spray. These the aging characteristics were examined through contact angle measurements, tracking resistance test, FT-IR and SEM/EDS analysis. the experimental results showed that tracking resistance decreases with increase in the UV-ray irradiation period. But the surface of silicone rubber kept hydrophobicity. It is found that the inorganic filler such as $Al(OH)_3$ improves tracking resistance and the $TiO_2$ is very effective in preventing degradation of silicone rubber surface from UV-ray.

• 공업화학
• /
• 제5권4호
• /
• pp.722-730
• /
• 1994

전기절연체로 사용되는 가교폴리에틸렌(XLPE)의 내후성에 미치는 산화방지제(Antioxidant)와 카본블랙의 효과를 살펴 보았다. 산화방지제와 카본블랙을 조합하여 16가지의 시료를 제작하고 xenon-arc lamp type의 Weather-Ometer로 500, 1000, 1500, 2000 시간 촉진열화시켰을 때 촉진열화 각 시간대별로 열화거동을 관찰하였다. 인장강도, 신장율, 절연파괴전압, tan ${\delta}$로 XLPE의 내후성을 평가한 결과, 산화방지제보다는 카본블랙이 더 효과적이었고 두 첨가제를 조합해서 사용할 때 내후성이 우수한 synergistic effect를 나타냈다.

• Corrosion Science and Technology
• /
• 제2권5호
• /
• pp.207-211
• /
• 2003

The weather resistance of five coatings systems based on alkyd, chlorinated rubber, epoxy, polyurethane and fluoropolymer were studied by natural exposure test and accelerated test. The coatings were exposed at Hanoi station with urban industry atmosphere and at Baichay station with marine atmosphere. The degradation of coatings was evaluated by gloss measurement and surface analysis by scanning electronic microscopy. The results obtained show that among coatings tested the gloss of polyurethane and fluoropolymer coatings remained highly and those of alkyd, chlorinated rubber and epoxy coatings were very low after two years of atmospheric exposure. Under accelerating conditions the gloss of fluoropolymer coatings remained highly after 80 cycles of testing. By comparison with accelerating test in UV-condensation chamber the conditions at atmospheric stations are more aggressive.

• 한국재료학회지
• /
• 제9권4호
• /
• pp.409-413
• /
• 1999

Recently, the polymeric insulators have been accepted in several countries for the outdoor high voltage applications. In comparison with the conventional porcelain, polymeric insulators offer various advantages such as light weight, superior vandal resistance and better contamination performance. The outdoor polymeric insulating materials such as silicone rubber, ethylene propylene diene monomer(EPDM), ethylene vinyl acetate(EVA) and epoxy are aged such as silicone rubber, ethylene propylene diene monomer(EPDM), ethylene vinyl acetate(EVA) and epoxy are aged under the various natural environment with the long-term performance in outdoor. In this paper, the effects of UV-under the various natural environment with the long-term performance in outdoor. In this paper, the effects of UV-ray on the surface of silicone rubber were investigated by using the weather-Ometer. The accelerated aging stresses were simulated by UV radiation, high temperature and humidity as well as water spray. These aging characteristics were examined through contact angle measurements, tracking resistance test, FT-IR and SEM/EDS analysis. The experimental results showed that tracking resistance decreases with increase in the UV-ray irradiation period. But the surface of silicone rubber kept hydrophobicity. It is found that the inorganic filler such as)$ Al(OH_3$ improves tracking resistance and the $Tio_2$is very effective in preventing degradation of silicone rubber surface from UV-ray.

• 보존과학회지
• /
• 제25권4호
• /
• pp.373-381
• /
• 2009

야외 전시되는 철제문화재 보존을 위해서 유물 표면을 피복처리 하는 것은 부식방지의 대표적인 방법이다. 근대문화유산 제78호 경의선장단역증기기관차는 보존조치 후 노천에서 전시될 예정이라서 기관차의 재부식 예방에 효과적인 표면 피복재를 내후성 실험을 통해 선별하였다. 실험재료는 기관차 표면 피복에 주로 사용되는 미정질 왁스 2종과 봉밀왁스를 기반으로 제조한 혼합왁스를 선별하였다. 실험방법은 3종의 왁스를 기관차 시편에 각각 피복하고 ISO 4892-1981 기준에 따라 제논아크촉진내후성시험기 속에서 1000시간 내후성 시험을 한 후 그 변화상을 비교 조사하였다. 실험결과 봉밀 왁스는 400시간 이후부터 표면에 백화현상이 발생하면서 노화하였고 미정질 왁스 2종은 800시간 이후부터 변화를 보였다. 시험전과 후 수분접촉각의 변화 역시 봉밀 왁스 보다 미정질 왁스가 적게 나타났다. 따라서 미정질 왁스 중 특히 고온형이 내후성과 수분 차단력이 가장 뛰어난 것으로 확인되어서 이것으로 증기기관차의 표면을 피복하게 되었다.

• 한국응용과학기술학회지
• /
• 제18권4호
• /
• pp.261-272
• /
• 2001

An ACR/HMMM film was prepared by blending high-solid ACR with curing agent, hexamethoxymethyl melamine (HMMM). An active curing reaction was observed at $170^{\circ}C$. The dynamic viscoelastic $T_{g}$ of the final film increased with the static viscoelastic $T_{g}$ of the film. The log damp value, which means a viscoelastic ratio, decreased with the increase in the curing temperature of the film. Physical properties of the films were within a suitable range for films, and by an accelerated weathering resistance test the films were proved weather resistible ones.