• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2001.11a
• /
• pp.70-75
• /
• 2001

There is a problem to be solved for improvement of durability and safety for concrete When the waterproofing and anticorrosive work of main concrete are design, the material a of construction need to be correctly applied to appropriate circumstance conditions. Epoxy mostly been used for concrete water tank structure. Lately, lots of subjects on adaption res in mortar for waterproofing and anticorrosive are under discussion. Then, we attempt to approach by evaluating and comparing every capabilities with waterproofing materials in this experiment. Capability evaluation items include the bond age and curing conditions, the bond strength after accelerated weathering test and fret impact resistance, a mount of water, seepage quan Through the experiment analysis, we found that waterproofingtity, drinking water chemicals resistance. and anticorrosive resin mortar used with glass fiber cloth, inorgar material is dominantly superior to other waterproofing materials. According to this paper, we suggest the resin mortar as a new surface treatment material water tank structure.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.597-599
• /
• 1995

We have analyzed the dielectrophoretic(DEP) force on a cell in a micro planar electrode structure. We fabricate a micro planar electrode structure using micro machining technology and measure the motion of a cell that is accelerated by DEP force. DEP force on a cell is calculated by curve fitting the motion of a cell. Radish and yeast are used for the experiment. In case of radish, DEP force is increased as the voltage and the frequency is increased, and in case of yeast, DEP force is increased only as the voltage is increased DEP force on a yeast does not vary when the frequency varies from 1 MHz to 3 MHz. The result will be helpful to the manipulation of cells using DEP force.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1372-1373
• /
• 2008

This study investigated the detection of corona discharge on polymer insulators at 13.2kV. Also, It will be analyzed by variety analyzers such as FT-IR, TA, and so on. It carried out an experiment and an actual measurement about corona detection using a UV-camera. This experiment and inspection would need to respect the above criteria. It was required to verify various experimental conditions and on-site inspection afterwards, but it was believed to minimize the measurement error by data-basing research results in a continuous manner and it was necessary to establish diagnosis technologies and standards in various electrical power facilities.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.5
• /
• pp.374-378
• /
• 2002

To evaluate growth habits, fresh pod yield potential, and possibility of early and late seeding, seeding dates were extended from March 21 to June 20 by PE mulching and non-mulching. Soil temperature, under 5cm from surface, above 15$^{\circ}C$ at 10 a.m. in early seeding reached about March 25 in mulching and April 5 to April 12 in non-mulching. Days to emergence and first flowering were accelerated owing to increasing temperature, as seeding was delayed. Days to emergence according to seeding dates reduced 21 to 8 day in mulching and 33 to 10 day in non-mulching. Days to flowering were ranged from 51 to 26 day in mulching and from 69 to 32 day in non-mulching and differences between mulching and non-mulching on each seeding date had 18 to 4 days. Early seedings till April 21 had 160-170 flowers per plant for 8 weeks, while late seedings from May 21 increased more speedily with 200 flower for 6 weeks. Harvesting of fresh peanut, at 80 days after first flowering, was possible from Aug. 1 to Oct. 7 (133-108 days to harvest) by mulching and from Aug. 19 to Oct. 12 (151 to 114 days) by non-mulching. Yields between mulching and non-mulching in early seeding until April 21 had more difference, but in late seeding after May 21 was higher and showed insignificance. Pod setting periods by early and late seeding were about 3 weeks equally. In late seeding pod setting were almost concentrated for front 15 days. In spite of difference of fresh pod weight between two seeding times, the distributions of average of seed weight showed nearly same tendency.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1441-1444
• /
• 2008

We developed ultra-accelerated quantum chemical molecular dynamics and spectroscopic characterization simulators for development of PDP materials. By combination of these simulators, realistic structure of PDP materials is drawn on the computer. Furthermore, based on the structures, various properties such as cathode luminescence spectrum and secondary electron emission, is successfully evaluated. The strategy of "Experiment integrated Computational Chemistry" using developed simulators will presented that has the potential in being powerful tool for designing the PDP materials.

• The Plant Pathology Journal
• /
• v.15 no.6
• /
• pp.330-334
• /
• 1999

Applying the method of quantitative analysis of pycnidiospore from the detached warts produced by the infection of Botryosphaeria dothidea on apple stems, repeated productivity of spores within the detached warts, variations in the amount of spores within the detached warts, variations in the amount of spores by the length of induction time for sporulation, and the effects of temperature and moisture on the sporulation were investigated. In addition to these experiment, the changes in the state of spores within the pycnidia contained in the warts accompanied by the induction of sporulation and dispersal of spores were also investigated. When detached warts were kept in moist conditions, the sporulation and discharge of spores were also investigated. When detached warts were kept in moist conditions, the sporulation and discharge of spores could be repeated several times, and the amount of spores were almost constant after each repeat of sporulation induction and dispersal of spores in a given period. The fact that the pycnidia filled with spores were observed at considerable rates within the warts which were subjected to the shaking in the water to release spores indicated that the spores might never be released until the pycnidia were fully matured. From the high rate of empty pycnidia even in the warts which were kept in moist conditions for induction of sporulation, the pycnidiospores might be produced through the development of new pycnidia. A considerable amount of pycnidiospores were produced at $5^{\circ}$, and the sporulation was accelerated with the rise of temperature until $35^{\circ}$. When the warts were supplied with sufficient moisture, sporulation was further accelerated. The results obtained in these experiment will be applied in developing the method for assessing the inhibitory efficacies of fungicides on the sporulation of this fungus, with which a new control measure would be developed.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.7
• /
• pp.483-491
• /
• 2011

When pipe components made of carbon steel in nuclear, fossil, and industry are exposed to flowing fluid, wall thinning caused by FAC(flow accelerated corrosion) can be generated and eventually ruptured at the portion of pressure boundary. A study to identify the locations generating local wall thinning and to disclose turbulence coefficient related to the local wall thinning was performed. Experiment and numerical analyses for tee of down scaled piping components were performed and the results were compared. In particular, flow visualization experiment which was used alkali metallic salt was performed to find actual location of local wall thinning inside tee components. To disclose the relationship between turbulence coefficients and local wall thinning, numerical analyses were performed for tee components. The turbulence coefficients based on the numerical analyses were compared with the local wall thinning based on the measured data. From the comparison of the results, the vertical flow velocity component(Vr) flowing to the wall after separating in the wall due to the geometrical configuration and colliding with the wall directly at an angle of some degree was analogous to the configuration of local wall thinning.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.7
• /
• pp.4398-4404
• /
• 2015

Stainless steel sheets are widely used as the structural material for dynamic machine structures, These kinds structures used stainless steel sheets are commonly fabricated by using the gas welding, For fatigue design of gas welded joints such as various type joint. It is necessary to obtain design information on stress distribution at the weldment as well as fatigue strength of gas welded joints. Thus in this paper, ${\Delta}P-N_f$ curves were obtained by fatigue tests. and, ${\Delta}P-N_f$ curves were rearranged in the ${\Delta}{\sigma}-N_f$ relation with the hot spot stresses at the gas welded joints. Using these results, the accelerated life test(ALT) is conducted. From the experiment results, an life prediction model is derived and factors are estimated. So it is intended to obtain the useful information for the fatigue lifetime of welded joints and data analysis by statistic reliability method, to save time and cost, and to develop optimum accelerated life prediction plans.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.12 no.2
• /
• pp.40-49
• /
• 2016

Flow accelerated corrosion (FAC) of the carbon steel piping has been a significant problem in nuclear power plants. FAC occurs under certain hydrodynamic, environmental, and material conditions, and extensive research into the factors of FAC has been conducted. The basic process of FAC is now relatively well understood; however, a full mechanistic model has not yet been established. Recently, the Korea Atomic Energy Research Institute (KAERI) has built a large experiment loop system for FAC. To produce significant experimental results using this system, the factors affecting on FAC should be analyzed quantitatively, and a model needs to be developed. In this work, a statistical modeling methodology to develop an empirical model is described in detail, and a preliminary model is suggested. Firstly, FAC data were collected from the research literature in Japan and the results of domestic experiments. The flow rate, water temperature, pH at room temperature, and the Cr content are selected as major factors, and nonlinear regression is used to find the best fit of the available data. An iterative procedure between suggesting and evaluating a model is used until an optimum model is obtained. The developed model gives the FAC rate comparable to the measured FAC rate. The developed model is going to be refined using additional laboratory data in the future.

• International Journal of Highway Engineering
• /
• v.17 no.6
• /
• pp.19-26
• /
• 2015

PURPOSES : This study intends to develop an inorganic soil pavement material using industrial by-products and to evaluate its applicability as a road pavement material. METHODS : In this study, a compressive strength experiment was conducted based on the NaOH solution molarity and water glass content to understand the strength properties of the soil pavement material according to the mixing ratio of alkali activator. In addition, the strength characteristic of the inorganic soil pavement material was analyzed based on the binder content. The performance of the soil pavement was evaluated by conducing an accelerated pavement test and a falling weight deflectometer (FWD) test. RESULTS : As a result of the soil pavement material test based on the mixture ratio of alkali activator, it was identified that the activator that mixed a 10 M NaOH solution to water glass in a 5:5 ratio is appropriate. As a result of the inorganic soil pavement materials test based on the binder content, the strength development increased sharply when the amount of added binder was over 300 kg; this level of binder content satisfied 28 days of 18 MPa of compression strength, which is the standard for existing soil pavement design. According to the measured results of the FWD test, the dynamic k-value did not show a significant difference before or after the accelerated pavement testing. Furthermore, the effective modulus decreased by approximately 50%, compared with the initial effective modulus for pedestrian pavement. CONCLUSIONS : Based on these results, inorganic soil pavement can be applied by changing the mixture proportions according to the use of the pavement, and can be utilized as road pavement from light load roads to access roads.