• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1391-1393
• /
• 2008

In this paper, the long-term reliability for 1.25G transceiver in use of high speed optical access network is investigated. High temperature storage tests and accelerated life tests are used to long-term reliability. Accelerated aging test have been during 3,000 hour of the three accelerated aging conditions by caused high temperature stress. Mean life is assumed to follow the Arrhenius relationship and analysis from the failure data obtained in the accelerated aging conditions.

• International Journal of Reliability and Applications
• /
• 제10권2호
• /
• pp.101-107
• /
• 2009

In the accelerated tests, the importance of correct failure analysis must be strongly emphasized. Understanding the failure mechanisms is requisite for designing and conducting successful accelerated life test. Under this presumption, a rational method must be identified to relate the results of accelerated tests quantitatively to the reliability or failure rates in use conditions, using a scientific acceleration transform. Most widely used models for relating the results of accelerated tests quantitatively to the reliability or failure rates in use conditions are an accelerated failure time model and a proportional hazards model. The purpose of this research is to compare the usability of the accelerated failure time model and proportional hazards model in the accelerated life tests.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.157-159
• /
• 2017

유도탄은 일반적으로 양산 후 바로 사용하는 것이 아니라 장기간 저장을 거친 후 사용되므로 운용 신뢰도가 아니라 저장 신뢰도가 매우 중요하다. 본 연구에서는 가속노화시험을 통해 유도탄의 엔진 조립체 및 부품에 대한 저장 신뢰도를 평가하는 방법을 제시한다. 엔진 조립체의 시험은 실제 저장 시간과 등가한 가속 시험조건에서 시험을 수행한 후 각 부품의 노화 상태를 확인한다. 반면, 부품에 대해서는 가속 시험조건에서 주기적으로 성능노화특성을 측정하여 고장시간을 예측한 후 여러 가속 조건의 시험데이터와 가속모델을 이용하여 사용조건의 수명을 결정하는 시험을 수행한다.

• 드라이브 ㆍ 컨트롤
• /
• 제21권1호
• /
• pp.22-30
• /
• 2024

Gearboxes designed for reciprocating motion operating mechanisms operate under conditions where both the load and speed undergo continuous variations. When conducting durability tests on gearboxes designed for such applications, operating the target gearbox under conditions similar to the intended usage is essential. The gearbox must be operated for the required number of cycles to validate its durability under conditions mirroring its intended usage. This study devised an accelerated test method for gearboxes, which reduces operating angles and operational strokes. The reliability of the accelerated test was verified by comparing the stresses imposed on the gears under general and acceleration conditions through multi-body dynamic simulations. The results confirmed that the maximum contact stress levels under normal and accelerated conditions were within a 0.1% error range, indicating a minimal difference in the gear damage rates. However, a difference in the maximum contact stress results between the normal and accelerated conditions was observed when inertial forces acted on the output shaft due to the operational acceleration of the gearbox. Therefore, when conducting this acceleration test, caution should be exercised to ensure that the operational load on the gearbox, which affects inertia, does not significantly deviate from the conditions observed under normal operating conditions.

• 대한기계학회논문집A
• /
• 제36권7호
• /
• pp.751-757
• /
• 2012

사용조건에서 수명시험을 수행할 경우 시험시간이 많이 소요되므로 사용조건보다 가혹한 스트레스 조건을 추가하여 가속수명시험을 수행하면 시험시간을 단축시킬 수 있다. 수명에 영향을 미치는 스트레스를 선정하여 각 스트레스의 사용조건과 가속조건에서 시험을 수행할 경우 가속 스트레스간에 교호작용이 존재할 수 있다. 그러나 기존의 연구에서는 2가지 이상의 가속 스트레스를 부과하여 가속수명시험을 수행할 경우 교호작용을 고려하지 않은 경우와 가속 수명에 대한 모델식을 제시한 연구들이 대부분이다. 본 논문에서는 기계류 부품의 수명에 영향을 미치는 가속 스트레스를 선정한 후 교호작용을 고려한 시험계획에 따라 가속수명시험을 수행한 자료를 이용하여 가속 계수와 가속 스트레스간의 관계식을 산출하는 방법을 제시하고자 한다. 또한 본 논문에서 제시한 교호작용을 고려한 가속시험방법과 가속 계수를 산출할 수 있는 모델식을 이용하여 복합적인 가속수명시험 수행시 쉽게 적용하고 결과를 산출할 수 있는 기초가 될 것으로 기대된다.

• Journal of the Korean Data and Information Science Society
• /
• 제15권4호
• /
• pp.935-943
• /
• 2004

Most of the accelerated life tests deal with tests that use only one accelerating variable and no other explanatory variables. Frequently, however, there is a test to use more than one accelerating or other experimental variables, such as, for examples, a test of capacitors at higher than usual conditions of temperature and voltage, a test of circuit boards at higher than usual conditions of temperature, humidity and voltage. A accelerated life test is extended to M-level stress accelerated life test with k-stress variables. The optimal design for Weibull distribution is studied with k-stress variables.

• 한국자동차공학회논문집
• /
• 제11권6호
• /
• pp.183-189
• /
• 2003

The study of the automotive noise reduction has been concentrated on the reduction of the automotive engine noise because the engine noise is the major cause of automotive noise. However, many studies of automotive engine noise led to the interest of the noise reduction of the exhaust and intake system. Recently, the active control method is used to reduce the noise of an automotive exhaust and intake system. It is mostly used the LMS(Least-Mean-Square) algorithm as an algorithm of active control because the LMS algorithm can easily obtain the complex transfer function in real-time. Especially, Filtered-X LMS (FXLMS) algorithm is applied to an Active Noise Control system. However, the convergence performance of LMS algorithm went bad when the FXLMS algorithm was applied to an active control of the induction noise under rapidly accelerated driving conditions. So, in order to solve this problem, the modified FXLMS algorithm is proposed. In this study, the improvement of the control performance using the modified FXLMS algorithm under rapidly and suddenly accelerated driving conditions was identified. Also, the performance of an active control using the LMS algorithm under rapidly accelerated driving conditions was evaluated through the theoretical derivation using a chirp signal to have similar characteristics with the induction noise signal.

• 한국산업정보학회논문지
• /
• 제7권2호
• /
• pp.33-39
• /
• 2002

Accelerated life testing of a car is used to get information quickly on its life distribution. Test cars are no under severe conditions and fail sooner than under usual conditions. A model is fitted to the accelerated failure times and then extrapolated to estimate the life distribution under usual conditions. This paper presents an accelerated test md the reliability growth theory, and applies it to some subsystems of cars during their prototype and pilot testing. The data presented illustrates explicitly the prediction of the reliability growth in the product development cycle. The application of these techniques is a part of the product assurance function that plays an important role in product reliability improvement.

• 한국철도학회논문집
• /
• 제6권4호
• /
• pp.265-272
• /
• 2003

The computer program for the accelerated life testing technique of a machine part under the service conditions is developed under the GUI environment so that the user can easily obtain the results by selecting the program module. Also, the theoretical backgrounds for the computer program and the procedures of the accelerated testing method are introduced by testing the specimens made of the stainless steel 316L under the high temperature and random loading. The reliability of the program is discussed by the experimental results of the fatigue life, age degradation and accelerated testing conditions.

• Corrosion Science and Technology
• /
• 제17권5호
• /
• pp.211-217
• /
• 2018

Natural degradation of grounding-electrode in soil environment should be monitored for several decades to predict the lifetime of the grounding electrode for efficient application and management. However, long-term studies for such electrodes have many practical limitations. The conventional accelerated corrosion test is unsuitable for such studies because simulated soil corrosion process cannot represent the actual soil environment. A preliminary experiment of accelerated corrosion test was conducted using existing test standards. The accelerated corrosion test that reflects the actual soil environment has been developed to evaluate corrosion performances of grounding-electrodes in a short period. Several test conditions with different chamber temperatures and salt spray were used to imitate actual field conditions based on ASTM B162, ASTM B117, and ISO 14993 standards. Accelerated degradation specimens of copper-bonded electrodes were made by the facile method and their corrosion performances were investigated. Their corrosion rates were calculated to $0.042{\mu}m/day$, $0.316{\mu}m/day$, and $0.11{\mu}m/day$, respectively. These results indicate that accelerated deterioration of grounding materials can be determined in a short period by using cyclic test condition with salt spray temperature of $50^{\circ}C$.