• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.2
• /
• pp.79-87
• /
• 2009

Pot experiments using sand culture were conducted in 2004 under greenhouse conditions to evaluate the effect of nitrogen deficiency on red pepper biomass. Nitrogen stress was imposed by implementing 6 levels (40% to 140%) of N in Hoagland's nutrient solution for red pepper. Canopy reflectance measurements were made with hand held spectral sensors including $GreenSeeker^{TM}$, $Crop\;Circle^{TM}$, and $Field\;Scout^{TM}$ Chlorophyll meter, and a spectroradiometer as well as Minolta SPAD-502 chlorophyll meter. Canopy reflectance and dry weight of red pepper were measured at five growth stages, the 30th, 40th, 50th, 80th and 120th day after planting(DAT). Dry weight of red pepper affected by nitrogen stress showed large differences between maximum and minimum values at the 120th DAT ranged from 48.2 to $196.6g\;plant^{-1}$, respectively. Several reflectance indices obtained from $GreenSeeker^{TM}$, $Crop\;Circle^{TM}$ and Spectroradiometer including chlorophyll readings were compared for evaluation of red pepper biomass. The reflectance indices such as rNDVI, aNDVI and gNDVI by the $Crop\;Circle^{TM}$ sensor showed the highest correlation coefficient with dry weight of red pepper at the 40th, 50th, and 80th DAT, respectively. Also these reflectance indices at the same growth station was closely correlated with dry weight, yield, and nitrogen uptake of red pepper at the 120th DAT, especially showing the best correlation coefficient at the 80th DAT. From these result, the aNDVI at the 80th DAT can significantly explain for dry weight of red pepper at the 120th DAT as well as for application level of nitrogen fertilizer. Consequently ground remote sensing as a non-destructive real-time assessment of plant nitrogen status was thought to be a useful tool for in season nitrogen management for red pepper providing both spatial and temporal information.

• Tuberculosis and Respiratory Diseases
• /
• v.46 no.6
• /
• pp.846-855
• /
• 1999

Background : Secondary pulmonary hypertension is an important final endpoint in patients with chronic hypoxic lung disease, accompanied by deterioration of pulmonary hemodynamics. The clinical diagnosis of pulmonary hypertension and/or cor pulmonale could be difficult, and simple noninvasive evaluation of pulmonary artery pressures has been an relevant clinical challenge for many years. Doppler echocardiography might to be a more reliable method for evaluating pulmonary hemodynamics in such patients in terms of the accuracy, reproducibility and easiness for obtaining an appropriate echocardiographic window than M-mode echocardiography. The aim of this study was to assess echocardiographic parameters associated with pulmonary arterial hypertension, defined by increasing right ventricular systolic pressure(RVSP), calculated from trans-tricuspid gradient in patients with chronic hypoxic lungs. Method : We examined 19 patients with chronic hypoxic lung disease, suspected pulmonary hypertension under the clinical guidelines by two dimensional echocardiography via the left parasternal and subcostal approach in a supine position. Doppler echocardiography measured RVSP from tricuspid regurgitant velocity in continuous wave with 2.5MHz transducer and acceleration time(AT) on right ventricular outflow tract in pulsed wave for the estimation of pulmonary arterial pressure. Results : On echocardiography, moderate to severe degree of pulmonary arterial hypertension was defined as RVSP more than 40mmHg, presenting tricuspid regurgitation. Increased right ventricular endsystolic diameter and shortened AT were noted in the increased RVSP group. Increased RVSP was correlated negatively with the shortening of AT. Other clinical data, including pulmonary functional parameters, arterial blood gas analysis and M mode echocardiographic parameters were not changed significantly with the increased RVSP. Conclusion : These findings suggest that shortened AT on pulsed doppler can be useful when quantifying pulmonary arterial pressure with increased RVSP in patients with chronic lung disease with hypoxemia. Doppler echocardiography in pulmonary hypertension of chronic hypoxic lungs is an useful option, based on noninvasiveness under routine clinical practice.

• Journal of Oral Medicine and Pain
• /
• v.34 no.4
• /
• pp.341-351
• /
• 2009

There is tremendous variability in the ways patients present with taste problems. Because of complex and multifactorial etiological background, it is not simple to evaluate patients with taste disorders. Accurate assessment of patients' status by prudent, thorough history taking and symptom analysis is the most essential for exact diagnosis of taste disorders. The aim of this study was to investigate the clinical characteristics of patients with taste problems as a primary complaint. Consecutive series of 50 patients (12 males and 38 females, mean age $53.6\;{\pm}\;14.7$ years) were included for the present study. All subjects were requested to complete a comprehensive questionnaire. Clinical evaluation procedures included oral examination, interview, questionnaire analysis, panoramic radiography, blood test and measurement of salivary flow rate. The obtained results were as follows: 1. Among the patients, 36 patients (72%) complained of oral mucosal pain or burning sensation. Of these patients, 18 patients (36%) were diagnosed as burning mouth syndrome. 2. Nineteen patients (38%) complained of subjective oral dryness. The flow rate of unstimulated whole saliva was less than 0.1 mL/min in 14 patients (28%) and 17 (34%) had a stimulated whole salivary flow rate of less than 0.5 mL/min. 3. Among the types of taste disorders, hypogeusia, the most frequently reported, was found in 25 patients (50%), dysgeusia in 18 patients (36%), phantogeusia in 15 patients (30%), hypergeusia in 10 patients (20%), and ageusia in 5 patients (10%). Nineteen patients (38%) reported more than one type of taste disorder and the most frequent combination was dysgeusia + hypogeusia (n=6, 12%). 4. Based on data from the medical and dental histories and examinations, the patients were assigned to 12 probable causal categories. Taste disorders due to oral mucosal diseases and idiopathic taste disorder were the most frequent (n=9; 18%, each), followed by psychogenic taste disorder (n=8; 16%), drug-induced taste disorder (n=7; 14%), and taste disorder due to dry mouth (n=6; 12%). These 5 categories of taste disorder accounted for 78% of all cases in this study.

• Sleep Medicine and Psychophysiology
• /
• v.13 no.2
• /
• pp.45-51
• /
• 2006

Obstructive sleep apnea (OSA) syndrome disrupts normal sleep. However, there were few studies to evaluate the asymmetric distribution, the one of the important factors of normal sleep in OSA subjects. We hypothesized that asymmetry would be broken in OSA patients. 49 male subjects with the complaint of heavy snoring were studied with polysomnography. We divided them into two groups based on the apnea-hypopnea index (AHI) fifteen: 13 simple snoring group (SSN, average AHI $5.9{\pm}4.4$) and 32 OSA group (average AHI $47.3{\pm}23.9$). We compared split sleep variables between the first half and the second half of sleep within each group with paired t-test for the evaluation of asymmetry. Changes of sleep architecture of OSA were higher stage 1 sleep% (S1), total arousal index (TAI), AHI, and mean heart rate (HR) and lower stage 2 sleep% (S2), REM sleep%, and mean arterial O2 saturation (SaO2) than SSN subjects. SWS and wake time after sleep onset (WASO) were not different between two groups. In split-night analysis, OSA subjects showed higher S2, slow wave sleep% (SWS), spontaneous arousal index (SAI), and mean HR in the first half, and higher REM sleep% and mean SaO2 in the second half. Those were same pattern as in SSN subjects. Mean apnea duration and longest apnea duration were higher in the second half only in the OSA. No differences of AHI, ODI, WASO, and S1 were found between the first and the second half of sleep in both groups. TAI was higher in the first half only in the SSN. SWS and WASO seemed to be influenced sensitively by simple snoring as well as OSA. Unlike our hypothesis, asymmetric distributions of major sleep architecture variables were preserved in OSA group. Losing asymmetry of TAI might be related to pathophysiology of OSA. We need more studies that include large number of subjects in the future.

• Tuberculosis and Respiratory Diseases
• /
• v.49 no.5
• /
• pp.558-567
• /
• 2000

Background : Recently, serologic techniques for tuberculosis have been developed and some of them, which are focusing on detection of serum antibodies mainly directed against specific 38-kDa Mycobacterium tuberculosis, have already been introduced into the markel. In this study, diagnostic significance of a new serologic test(ELISA kit) for pulmonary tuberculosis was evaluated. Method : Serologic test with newly developed ELISA kit was performed upon 474 individuals, who include 333 active pulmonary tuberculosis patients, 80 healthy cases, and 61 tuberculosis contact cases. This serologic test was based on the ELISA technique and designed to detect antibodies to mixed complex antigens including 38-kDa, which were developed by Erume Biotech Co., Seoul. Active pulmonary tuberculosis was diagnosed by sputum AFB smear and culture methods. Results : The seropositivities using this ELISA kit were 82.1% and 73.6% in smear-positive and negative groups among active pulmonary tuberculosis, respectively. And, it also showed that seronegativities were 97.5% and 85.2% in healthy and contact groups, respectively. As a whole, the results of our study using the ELISA kit as a diagnostic method for pulmonary tuberculosis showed 80.0% sensitivity for active pulmonary tuberculosis, 97.5% specificity, 96.1% positive predictive value, and 65.0% negative predictive value when the prevalence of tuberuclosis in the samples was 60.1%. Conclusion : Our results reveal that the detection of antibody its reaction with 38-kDa antigen of M. tuberculosis is not sufficient to be accepted as single diagnostic method for pulmonary tuberculosis. However, they suggest that ELISA kit may be considered as an adjunctive test to standard diagnostic techniques of pulmonary tuberculosis.

• Tuberculosis and Respiratory Diseases
• /
• v.49 no.2
• /
• pp.198-206
• /
• 2000

Background : Pulmonary complications following bonemarrow transplantation (BMT) are common and associated with a high mortality rate. We investigated the yield, safety, and impact of fiberoptic bronchoscopy (FOB) for diagnosis of postBMT pneumoniae. Methods : From May 1997 to April 2000, 56 FOBs were performed in 52 post BMT patients for clinical pneumoniae. BMT patients with respiratory symptoms and/or pulmonary infiltrates had a thoracic HRCT(high resolution computed tomography) and bronchoscopic examination including BAL (bronchoalveolar lavage), TBLB (transbronchial lung biopsy), PSB (protected specimen brush). Results : The characteristics of the subjects were as follows : 37 males, 15 females, mean age of 31.3 years(l7-45), 35 sibling donor allogenic BMTs, 15 nonrelated donor allogenic BMTs, and 2 autologous BMTs. Fiftynine percent of FOBs (33 FOBs, 31 patients) were diagnostic. Isolated pathogens included the following : 12 cytomegalovirus (CMV) (21.4 %), 7 pneumocystis carinii (PC) (12.5 %), 11 CMV with PC (19.6 %), 2 Mycobacaterium tuberculosis (3.6%), and 1 streptococcus (1.8%). Most of the radiographic findings were diffuse interstitial lesions. CMV pneumoniae had mainly diffuse interstitial nodular lesion, and PC pneumoniae had diffuse, interstitial ground glass opacity(GGO). When CMV was accompanied by PC, a combined pattern of nodular and GGO was present. Of the 56 cases (23.2%), 13 died of CMV pneumoniae (n=2), PCP (n=2),mixed infection with CMV and PC (n=3), underlying GVHD (n=1), underlying leukemia progression (n=1), or respiratory failure of unknown origin (n=4). There was no major complication by bronchoscopy. Only 3 cases developed minor bleeding and 1 episode temporary hypoxemia. Conclusion : Based on our findings, CMV and PC are the major causes of postBMT pneumoniae. In addition, BAL can be considered a safe and accurate procedure for the evaluation of pulmonary complications after BMT.

• Culinary science and hospitality research
• /
• v.21 no.1
• /
• pp.281-296
• /
• 2015

This study performed to find proper temperature and improve texture and taste of pickle by considering physic-chemical characteristic and sensory evaluation. The basis temperature of the pickle was manufactured by 5 temperatures($95^{\circ}C$, $85^{\circ}C$, $75^{\circ}C$, $65^{\circ}C$, $5^{\circ}C$) at intervals of $10^{\circ}C$, and the dangerous Temp range was exempted during 12 days. Results showed that 3rd day at $95^{\circ}C$ was the best temperature for the quality specification of the pickle. In addition, between 6th to 12nd days at $85^{\circ}C$ and $95^{\circ}C$ appeared the most excellent preferences of the pickles. Thus, quality specifications showed different results by the date, and it appeared $95^{\circ}C>85^{\circ}C>75^{\circ}C>65^{\circ}C>5^{\circ}C$ in order. Furthermore, the liquid pickles at the temp of $95^{\circ}C{\sim}85^{\circ}C$ showed better texture and flavor of pickles as well as good preference. Based on these results, managers or administrators of foodservice business will be recognized the importance of temperature and storage period for salted pickles to improve its texture and taste along with improving quality and preference.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.3
• /
• pp.183-195
• /
• 2020

Purpose: The purpose of this study is to compare the flexural strength of CAD/CAM denture base resins with conventional denture base resins based on their thicknesses. Materials and Methods: For the conventional denture base resins, Lucitone 199^® (C-LC) was used. DIOnavi - Denture (P-DO) and DENTCA Denture Base II (P-DC) were taken for the 3D printing denture base resins. For the prepolymerized PMMA resins, Vipi Block Gum (M-VP) and M-IVoBase^® CAD (M-IV) were used. The final dimensions of the specimens were 65.0 mm x 12.7 mm x 1.6 mm / 2.0 mm / 2.5 mm. The 3-point bend test was implemented to measure the flexural strength and flexural modulus. Microscopic evaluation of surface of fractured specimen was conducted by using a scanning electron microscope (SEM). After testing the normality of the data, one-way ANOVA was adopted to evaluate the differences among sample groups with a significance level of P = 0.05. The Tukey HSD test was performed for post hoc analysis. Results: Under the same thicknesses, there are significant differences in flexural strength between CAD/CAM denture base resins and conventional denture base resins except for P-DO and C-LC. M-VP showed higher flexural strength than conventional denture base resins, P-DC and M-IV displayed lower flexural strength than conventional denture base resins. Flexural modulus was highest in M-VP, followed by C-LC, P-DO, P-DC, M-IV, significant differences were found between all materials. In the comparison of flexural strength according to thickness, flexural strength of 2.5 mm was significantly higher than that of 1.6 mm in C-LC. Flexural strength of 2.5 mm and 2.0 mm was significantly higher than that of 1.6 mm in P-DC and M-VP. In M-IV, as the thickness increases, significant increase in flexural strength appeared. SEM analysis illustrates different fracture surfaces of the specimens. Conclusion: The flexural strength of different CAD/CAM denture base resins used in this study varied according to the composition and properties of each material. The flexural strength of CAD/CAM denture base resins was higher than the standard suggested by ISO 20795-1:2013 at a thickness of 1.6 mm or more though the thickness decreased. However, for clinical use of dentures with lower thickness, further researches should be done regarding other properties at lower thickness of denture base resins.

• Restorative Dentistry and Endodontics
• /
• v.31 no.4
• /
• pp.323-329
• /
• 2006

The aim of this study was to evaluate the retrievability of Resilon as a root canal filling material Twenty-seven human single-rooted extracted teeth were instrumented utilizing a crown down technique with Gates-Glidden burs and ProFile system. In group1 (n = 12) canals were obturated with gutta percha and AH-26 plus sealer using a continuous wave technique and backfilled. In group 2 (n = 15) Resilon was used as a filling material. Then teeth were sealed and kept in $37^{\circ}C$ and 100% humidity for 7 days. For retreatment, the samples were re-accessed and filling material was removed using Gates-Glidden burs and ProFiles. Teeth were sectioned longitudinally to compare the general cleanliness and amount of debris $({\times}\;75)$ using SEM. Chi-square test was used $({\alpha}\;=\;0.05)$ to analyze the data. The total time required for removal of filling materials was expressed as mean ${\pm}SD$ (min) and analyzed by the Student t-test $({\alpha}\;=\;0.05)$, Required time for retreatment was $3.25\;{\pm}\;0.32$ minutes for gutta percha/ AH 26 plus sealer and $3.05\;{\pm}\;0.34$ minutes for Resilon. There was no statistically significant difference between the two experimental groups. There was no significant difference between the groups in the cleanliness of the root canal wall. This study showed that Resilon was effectively removed by Gates-Glidden burs and ProFiles.

• Anxiety and mood
• /
• v.7 no.1
• /
• pp.48-53
• /
• 2011

Objective : Korean Version of Beck-II Depression Inventory to verify the reliability and validity of the proposed standards are practical and standardized, cut-off score by establishing a baseline indicating the presence of depression and depression On in the evaluation was to evaluate the clinical usefulness. Methods : 739 patients with major depression using the SCID and normal controls were 302 study subjects. Of patients with clinically significant medical condition, or psychotic disorders, organic mental disorder, epilepsy or seizure disorder, eating disorders are associated with patients taking anti-convulsants experienced in the past, patients were excluded from the study. Results : The main findings of this study were as follows. First, with respect to the KBDI-II items, the correlation between them ranged from 0.51 to 0.74, and was 0.60 over all questions. Further, the overall correlation of the KBDI-II plates showing confidence 'normal' than it was verified that. Second, the BDIII was used in each group to examine internal consistency and thus, whether Cronbach's alpha values were greater than 0.94. Third, the principal component analysis sought to extract factors in a way consistent with the results inspected last 3 factors were extracted and the total variance explained was 47.3%. Fourth, the Cutting calculated the score on the KBDI-II for ROC (Receiver operator characteristic) analysis yielding 18 dot, with the highest sensitivity and specificity was seen. Conclusion : Based on the results of this Study, the KBDI-II cut-off point should be valid as prescribed in 18 is considered.