• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1489-1497
• /
• 2009

The rectifier for Electric railway is one of the most important facilities in DC urban railway which converts power from KEPCO(AC 22.9kV) to the electric mil car(DC 1.5kV), therefore it should be managed as the best condition for the drive. There are several things to cause performance degradation and deterioration of parts such as pollutants occurred by it established under the ground such as dust or foreign substances, rapid changes of driving current, and pyrogen which put the rectifier for Electric railway in malfunction. On the flow of time, the rectifier for Electric railway is causing a malfunction or failure which drive electric rail car in operations as well as loss of life. In this research we try to find the way of removing the various components of mal-functions in the performance of the rectifier for Electric railway by Over-Haul and reform itself, which gives us to get the chance investment of the reduction, the reliability of power supply to the electric rail car.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.371-377
• /
• 2009

The use of polymer insulator has increased all over the world. As of 2000's KEPCO has used it fully since they introduced it in early 1990's. In Korea it is very widely used by KORAIL which uses AC 25 kV system in the ground electric car line. And It is also used in tunnel electric car line to support AT feeder line. But it has not been used in the section of DC 1500 V. In case of DC 1500 V electric railway system It is has been developed by research institutes by means of R&D projects since 2008. The user cleans porcelain insulators regularly by water because of dusts and pollution. In case of polymer insulators It is very easy to be made dirty by pollution because of the material properties and hard to be cleaned by cleansing. In accordance with these reasons It is worried about deterioration. This paper deals with anticipating problems when we apply it to DC electric railway system and the procedure for testing polymer support insulator.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.356-361
• /
• 2005

Earth brush for electrical multiple units(EMUs) is a device through which the current of the EMU load's consumed power fed from the DC 1,500V overhead line (or from the AC 25.000V catenary) flows via axle to the rail(ground) and which prevents the electric corrosion of the axle bearings by preventing the current flow to the axle bearings caused by electric potential from the magnetic field when the bearings rotate together with the earthing function when a thunderbolt falls or a surge comes. The earth brush wear rates among cars, however, shows quite differences when the earth brushes after being separated from the holders are measured with vernier callipers every 6 months of maintenance period. Main causes of the earth brush wear are divided as mechanical, electric arc and electrical one, and the factors can be running speed, current, harmonics, connection state. spring tension, earth brush material, lubricant and so on. but only the earth brushes of the motor(M1) car show the highest wear rate and moreover maintenance difficulty occurs because of the wear rate differences among e earth brushes in one holder. The reason for these preponderant wear comes from the design concept of making preponderant current flow to some particular earth brushes and moreover the heat generated by the harmonics when the inverter starts to operate accelerate the wear. By defining these causes through experiments. I hope that the found results would be helpful for the future EMU design, safety, economy and maintenance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.2
• /
• pp.325-328
• /
• 2020

This paper demonstrated a voltage-controlled oscillator (VCO) using cost-effective (1-poly 6-metal) mixed signal standard CMOS process. To have the high-quality factor inductor in LC resonator with thin metal thickness, patterned-ground shields (PGS) was adopted under the spiral to effectively reduce the ac current of low resistive Si substrate. And, because of thin top-metal compared with that of RF option (2 ㎛), we make electrically connect between the top metal (M6) and the next metal (M5) by great number of via array along the metal traces. The circuit operated from 2.48 GHz to 2.62 GHz tuned by accumulation-mode varactor device. And the measured phase noise of LC VCO has -123.7 dBc/Hz at 1MHz offset at 2.62 GHz and the dc-power consumption shows 2.07 mW with 1.8V supply voltage, respectively.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.2
• /
• pp.79-88
• /
• 2022

Recently, securing stable supply of fresh food is deemed as one of the important tasks. Accordingly, now the presence of cold chain along with the needs of a comfortable and healthy life is growing as the online market expands and the contactless industry grows, however, cold chain is being studied only in the aspect of ground and sea transportation. And, due to global warming and strengthening global environmental regulations, we believe that it is necessary to convert the existing road-centered logistics system into a railway-centered logistics system, a low-carbon transportation means. Therefore, in this paper we calculated the maximum energy required by the reefer container as a basic research necessary for constructing the low temperature distribution and cold chain based on the reefer container railway, and conducted a study on methods of supplying the reefer container power utilizing 1. tramline, 2. battery, 3. generator. The results of this paper can be utilized as a foundational study for building a cold chain based on a reefer container dedicated to freight trains in the future.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.338-342
• /
• 1999

We simulated the current limiting characteristics of resistive and inductive SFCLs with 100 ${\omega}$ of impedances for a single and double line-to-ground faults in the 154 kV grid between two substations nearby Seoul. The transient current at the faults includes not. only high AC current up to 44 kA but also significant DC component as high as 4 kA. The DC current is greater and lasts longer for the double line-to-ground fault than for the single line-to-ground fault. The inductive SFCL limited the fault current more effectively than the resistive one. The DC component, however, was greater and diminishes slower for the inductive SFCL than for the resistive one.

• Journal of Periodontal and Implant Science
• /
• v.30 no.3
• /
• pp.661-676
• /
• 2000

Gingivitis and periodontitis are infectious diseases in that microorganisms are the primary extrinsic cause of the diseases. the occurrence of gingivitis has been associated clearly with the presence of microorganisms at the disease site, and the histologic nature of the tissue involved is indicative of an inflammatory response induced by microorganisms. additional evidence for the microbial etiology of periodontal disease is that numerous antimicrobial agents are effective in reducing plaque accumulation and periodontal diseases. the purpose of this article is to analyze the antimicrobial effects of Pulsatilla koreana. Well-dried Pulsatilla koreana purchased from herbs distributor was ground and extracted into methanol(MeOH), ethylacetate(EtoAc), chlorform($CHCl_3$) and Butyl alcohol(BuOH). we have then applied each solution to the bacteria samples(Bacteroides forsythus, Streptococcus mutans, Streptococcus sanguis, Porphylomonas gingivalis, Actinobacillus actinomycetemcomitans, Eikenella corrodens, Prevotella intermedia, Actinomyces viscosus, Prevotella nigrescens , Rothia dentocariosa, Fusobacterium nucleatum, Pseudomonas aeruginosa, Staphylococcus aureus) collected from several organizations. To conduct susceptibility test(Kirby-Bauer method), plate contained each periodontopathic bacteria is spread extracted into methanol(MeOH), ethylacetate(EtoAc), chlorform($CHCl_3$) and Butyl alcohol(BuOH) and to measure the minimum inhibition concentration(MIC) of the bacteria against the solutions to ultimately determine antimicrobial effects of the solutions, insert bacteria sample into $20{\mu\ell}/{m\ell}$, $10{\mu\ell}/{m\ell}$, $5{\mu\ell}/{m\ell}$, $2.5{\mu\ell}/{m\ell}$ of each solution and control group(not contained solution) 1. Solution extracted into methanol did not show clear zone against all bacteria samples. Only P.nigrescens, S. mutans and S. sanguis in solution extracted into ethylacetate, S. mutans and S. anguis in solutions extracted into chlorform and Butyl alcohol showed clear zone against all bacteria samples. Solution extracted into Butyl alcohol showed clear zone against 13 types of bacteria, excluding P. gingivalis. 2. In Solution extracted into methanol, the bacteria samples grew in the highest concentrated plate, showing minimal variation from control group. 3. In Solution extracted into Butyl alcohol, S. aureus, P. intermedia, E. corrodens, A. actinomycetemcomitans, B. forsythus, P. gingivalis et al. showed decreased growth in the highest concentrated plate. P. auruginosa, R. dentocariosa, A. viscosus, P. nigrescens, S. mutans et al. showed decreased growth at MIC $20{\mu\ell}/{m\ell}$ and S. sanguis showed decreased growth at MIC $10{\mu\ell}/{m\ell}$. 4. By analyzing the MIC level through considering the results from Kirby-Bauer method, Solution extracted into methanol did not reveal any antimicrobial effects and Solution extracted into Butyl alcohol showed the highest antimicrobial effects In conclusion, it can be used the extracts of Pulsatilla koreana as wide spectrum antimicrobial agent.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.25-34
• /
• 2019

Recently, when a fault occurs at a long-distance point in a LVDC (low voltage direct current) distribution feeder in a light rail system, the magnitude of the current can decrease to less than that of the load current of a light rail system. Therefore, proper protection coordination method to distinguish a fault current from a load current is required. To overcome these problems, this paper proposes an optimal algorithm of protection devices for a LVDC distribution feeder in a light rail system. In other words, based on the characteristics of the fault current for ground resistance and fault location, this paper proposes an optimal operation algorithm of a selective relay to properly identify the fault current compared to the load current in a light rail system. In addition, this paper modelled the distribution system including AC/DC converter using a PSCAD/EMTDC S/W and from the simulation results for a real light rail system, the proposed algorithm was found to be a useful and practical tool to correctly identify the fault current and load current.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.27 no.2
• /
• pp.34-44
• /
• 2024

Recently, due to abnormal climate caused by climate change, natural disasters such as floods, landslides, and soil outflows are rapidly increasing. In Korea, more than 63% of the land is vulnerable to slope disasters due to the geographical characteristics of mountainous areas, and in particular, Quarry mines soil and rocks, so there is a high risk of landslides not only inside the workplace but also outside.Accordingly, this study built a DEM using UAV and aviation LiDAR for monitoring the quarry, conducted a time series change analysis, and proposed an optimal DEM construction method for monitoring the soil collection site. For DEM construction, UAV and LiDAR-based Point Cloud were built, and the ground was extracted using three algorithms: Aggressive Classification (AC), Conservative Classification (CC), and Standard Classification (SC). UAV and LiDAR-based DEM constructed according to the algorithm evaluated accuracy through comparison with digital map-based DEM.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.25 no.2
• /
• pp.163-169
• /
• 2012

A decrease in pass ratio of Korean exporting pears causes several negative effects including an increase in pesticide dependency. In this study, we attempted to establish the pest forecasting management system, composed of weekly field forecasting by pear farmers, meteorological data obtained by automatic weather station (AWS), newly designed internet web page ($\underline{http://pearpest.jnu.ac.kr/}$) as information collecting and providing ground, and information providing service. The weekly field forecasting information on major pear diseases and pests was collected from the forecasting team composed of five team leaders from each pear exporting complex. Further, an abridged weather information for the prediction of an infestation of major disease (pear scab) and pest (pear psylla and scale species) was obtained from an AWS installed at Bonghwang in Naju City. Such information was then promptly uploaded on the web page and also publicized to the pear famers specializing in export. We hope this pest forecasting management system increases the pass ratio of Korean exporting pears throughout establishment of famer-oriented forecasting, inspiring famers' effort for the prevention and forecasting of diseases and pests occurring at pear orchards.