• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.6 no.4
• /
• pp.453-462
• /
• 1994

An unsteady quasi one-dimensional model of momentum, heat and mass transfer in a falling film of a vertical plate absorber which is cooled by air was developed using the integral method. Energy conservation of the absorber wall is considered in the model. The model can predict absorption rate, film thickness and mean velocity as well as concentration and temperature profiles. Predictions of steady state temperature and concentration profiles for LiBr/water system for constant wall temperature condition are in good agreement with the two-dimensional finite difference method solutions. Effects of operating conditions, such as convective heat transfer coefficient between the cooling air and the absorber wall, cooling air temperature and film thickness at inlet, on absorption rate of water vapor into LiBr/water solution were shown.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.2
• /
• pp.670-679
• /
• 1996

A numerical study for vapor absorption into LiBr-H$_{2}$O solution film flowing over horizontal circular tubes has been carried out. The momentum, energy and diffusion equations, which are parabolized by the boundary- layer approximation, are solved simultaneously for various mass-flow rates and inlet conditions. The results for the velocity, temperature and concentration fields, as well as the heat and mass flux at the free surface are presented. The effects of inlet conditions, i.e., flow rate, temperature and concentration, on the absorption process are also examined and discussed.

• Journal of Astronomy and Space Sciences
• /
• v.17 no.2
• /
• pp.125-132
• /
• 2000

Long-slit spectra, covering the wavelength range 4050~5150$\AA$, have been used to investigate the radial behavior of absorption line features (G4300, Fe4383, Ca4455, Fe4531, Fe4668, and H$\beta$) along the major and minor axes of the bulge of M104. The heliocentric recession velocity of M104 has been derived as 1260$\pm$190${kms}^{-1}$. The strength of a number of metal absorption lines is decreasing with increasing radius, and the minor axis shows much steeper radial line gradients than the major axis. Line index of H$\beta$ has an opposite trend to other metal lines, i.e., increasing outward. The results in this paper imply that the properties of absorption line index distribution in M104 bulge have in many aspects similar trends to those of elliptical galaxies.

• Journal of Plant Biology
• /
• v.21 no.1_4
• /
• pp.33-38
• /
• 1978

Phosphate absorption from a Na2H32PO4 solution by Oryza sativa L. was studied in order to elucidate kinetic mechanisms of ion transport. The rates of phosphate absorption from different concentraitons indicated the presence of dual mechanisms in root tips, one in the low (1$\times$10-6 to 8$\times$10-5M) and the other in the high (1$\times$10-4 to 8$\times$10-3M). A phosphate compensation point of phosphate transport was revealed with a 1$\times$10-6M solution of Na2H32PO4. The kinetic model that ion transport involves an exchange reaction of absorption and desorptin is prosposed as follows: where C represents an ionic-specific organic carrier in the membrane; M, Mo and Mi are the mineral ions, M-outside and M-inside; MC is a carrier-ion complex; and the K's represent rate constants. In this model, the Mi velocity, v, is given by: {{{{v= {dMi} over {dt}= {(K1K3Mo-K2K4Mi) Ct} over {(K2＋K3)＋K1Mo＋K4Mi} }} where Ct is equal to C＋MC, and t is time.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.10a
• /
• pp.167-170
• /
• 2004

In order to investigate the impact behaviors of 3-D braided glass/epoxy composites, the energy profiles and damage area were compared to the laminates of similar volume fraction and composition. The energy profiles showed different characteristics from each other which indicates they have distict energy absorption mechanisms. The image analysis on the damage projections visualized the crack propagation paths along the fiber direction.

• The Journal of Engineering Geology
• /
• v.23 no.4
• /
• pp.341-352
• /
• 2013

The physical and mechanical properties of red shale and black shale exposed in the Daegu area were investigated in tests conducted to determine unit weight, absorption ratio, porosity, ultrasonic velocity, unconfined compressive strength, point load strength, slake durability index, and deterioration characteristics. XRD, XRF, and SEM analyses were also performed on the shale specimens. While the unit weights of the two shales were similar, the absorption ratio and porosity were higher in the red shale than in the black shale. Despite the higher porosity of the red shale, the ultrasonic velocity, compressive strength, and point load strength were higher in the red shale, which is an unexpected result that may be due to the presence of fine laminations in the black shale. The deterioration rate, as determined from the point load strength and the slake durability index, increased with increasing immersion time and with the acidity of the immersion liquid. The deterioration rate was higher for the red shale than for the black shale because of the higher porosity of the former.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.11
• /
• pp.46-56
• /
• 2010

The present research works investigated into the low velocity impact characteristics of DP 780 high strength steel sheet with 1.7 mm in thickness subjected to free boundary condition using three-dimensional finite element analysis. Finite element analysis was carried out via ABAQUS explicit code. Hyper-elastic model and the damping factor were introduced to improve an accuracy of the FE analysis. An appropriate FE model was obtained via the comparison of the results of the FE analyses and those of the impact tests. The influence of the impact energy and nose diameter of the impact head on the force-deflection curves, impact time, absorption characteristics of the impact energy, deformation behaviours, and stress-strain distributions was quantitatively examined using the results of FE analysis. The results of the FE analysis showed that the absorption rate of impact energy lies in the range of the 70.7-77.5 %. In addition, it was noted that the absorption rate of impact energy decreases when the impact energy increases and the nose diameter of the impact head decreases. The local deformation of the impacted region was rapidly increased when the impact energy was larger than 76.2 J and the nose diameter was 20 mm. A critical impact energy, which occur the instability of the DP780, was estimated using the relationship between the plastic strain and the impact energy. Finally, characteristics of the plastic energy dissipation and the strain energy density were discussed.

• The Journal of the Petrological Society of Korea
• /
• v.20 no.3
• /
• pp.141-149
• /
• 2011

Samples (two granites, marble, sandstone) were heated in an electric furnace at temperature $400^{\circ}C$ and $600^{\circ}C$ in order to investigate the change of physical properties of rocks depending on the heating temperature. Changes of Color and physical properties such as specify gravity, porosity, absorption, p-wave velocity are visible while mineralogical changes by using polarizing microscope are not pronounced. In addition, porosity and absorption increased while specific gravity and p-wave velocity decreased at a more higher temperature ($600^{\circ}C$). Although the open porosity does not indicate total porosity of the rock. but p-wave velocity can be used to evaluate the degree of damage Therefore, porosity and p-wave velocity should be compared in order to investigate the change of physical properties of rocks depending on the heating temperature.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.2
• /
• pp.332-337
• /
• 2004

The use of gas absorption refrigeration machine has considerably increased because of the shortage of the electric power in the summer and the regulation of freon refrigerant. Gas absorption refrigeration machine consists of a condenser, a heat exchanger. supplying pipes, a radiator etc, This system is likely to be corroded by acid. dissolved oxygen and gases, Cavitation erosion-corrosion by flow velocity of cooling water may happen in absorption refrigeration machine. In these cases. erosion and corrosion occur simultaneously. Then, it makes a serious damage with synergy effect. Therefore, this paper was studied on the cavitation damage of cupronickel(70/30) tube for gas absorption refrigeration machine, In the $30^{\circ}C$ tap water, linear polarization test and anodic polarization test were carried out for copper(C1220T-OL) and cupronickel(70/30) tube. Also, cavitation erosion-corrosion behavior of cupronickel (70/30) tube was considered, The main results are as following: (1) In the linear test, the corrosion current density of cupronickel(70/30) is higher than that of copper. (2) The erosion-corrosion rate of cupronickel(70/30) displayed later tendency than that of copper by vibratory cavitation in cooling water. (3) In cooling water, the progress mechanism of erosion-corrosion rate of copper and cupronickel(70/30) follows a pattern of incubation, acceleration, attenuation and a steady state period.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.539-540
• /
• 2007