• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.426-431
• /
• 2004

Leaking water coolant into stator electrical insulation is a growing concern for the aging water-cooled generator since leaks in the generator water-cooled stator winding can affect machine availability and insulation life. But a domestic techniques of such field are insufficient and depend wholly on GE or TOSHIBA technique. Therefore this paper introduces measuring principle and developed measuring system, which has been used to detecting wet absorption. We accomplished the experiment with a stator promotion of virtue which is used in actual power plant. Also, Experimental method of generator stator winding, which is investigated into wet absorption test.

• Journal of Magnetics
• /
• 제12권1호
• /
• pp.49-52
• /
• 2007

We investigated annealing effect of microforged powders on magnetic properties and electromagnetic absorption behaviors for ferromagnetic Fe-Cr metal alloy powder-polymer composites. The coercive properties greatly decreased with annealing temperature and the magnetic permeability had significantly increased after microforging and subsequent annealing treatment, due to a reduction in lattice strain of the microforged powders. The power loss in the far field regime also had greatly increased after microforging and subsequent annealing treatment in frequency range from 50 MHz to 6 GHz. As a result, the electromagnetic absorption of ferromagnetic Fe-Cr alloy metal powder-polymer composites was highly improved because of the relaxation of the internal strain during annealing process.

• 한국광학회지
• /
• 제11권6호
• /
• pp.434-440
• /
• 2000

Lambertian 산란 특성을 갖는 난반사체를 적용하고 1kW의 출력을 갖는 고출력 레이저 다이오드를 여기광원으로 이용하여 고출력 Nd:YAG 레이저를 제작하였다. 지름이 5mm인 레이저봉을 사용하고 짧은 공진기를 구성하여 연속발진시켰을 때 약 500W의 고출력을 얻을 수 있었고 이때 기울기 효율은 49% 광변환효율 46.7%로 매우 높은 효율을 얻었다. 지름이 6mm인 레이저봉을 사용하였을때에는 LD여기광의 흡수 분포가 불균일해져서 광변환효율은 감소하였다. 발생한 레이저빔의 빔질인자(Beam Quality Factor) M$^2$는 약 70 정도로 관측되었으며 이는 측정된 열렌즈 초점거리로부터 계산된 빔질인자보다 약간 작은 값으로 여기광의 흡수 분포가 매우 균일함을 보여준다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1365-1368
• /
• 2004

A scheme to control the laser power and the exposure time was studied to fabricate precise microstructures using the nanostereolithography (nSL) process. Some recent works have shown that a three-dimensional (3D) microstructure can be fabricated by the photopolymerizing process which is induced by two-photon absorption (TPA) with a femtosecond pulse laser. TPA provides the ability to confine photochemical and physical reactions within the order of laser wavelength, so neardiffraction limit features can be produced. In the nSL process, voxels are continuously generated to form a layer and then another layer is stacked in the normal direction of a plane to construct a 3D structure. Thus, fabrication of a voxel with low aspect ratio and small diameter is one of the most important parameters for fabricating precise 3D microstructures. In this work, the mechanism of a voxel formation is studied and a scheme on the control of laser power and exposure for minimizing aspect ratio of a voxel is proposed.

• 한국환경복원기술학회지
• /
• 제16권3호
• /
• pp.55-62
• /
• 2013

Generally, the radioactivity from NPP(Nuclear Power Plants) operation can be released below 3% of DRLs(Derived Release Limits) to environment. It was tried to understand which plant was efficient for absorbing radioactivity in this study. Pinus thunbergii Parl. and Viburnum awabuki K. KOCH were analyzed for radioisotope absorption. The samples were collected at three different locations depending on the distance from NPP at the vicinity 10km away, and 30km away. Gamma radionuclide was not detected from the samples, which means that the direct transition into the plant was not significant. Meanwhile, the very low level of radioactive tritium was detected in the samples. One remark was that every plant has different ability for tritium absorption. These results are expected to be applied to propagation and transplanting in radioactively contaminated area or reducing radioactivity in the soil and water near the plants.

• Bulletin of the Korean Chemical Society
• /
• 제35권4호
• /
• pp.1191-1194
• /
• 2014

Imaging Differential Optical Absorption Spectroscopy (Imaging-DOAS) has been utilized in recent years to provide slant column density (SCD) distributions of several trace gas species in the plume. The present study introduces a new method using Imaging-DOAS data to determine two-dimensional plume structure from the plume emissions of power plant in conditions of negligible aerosol effects on radiative transfer within the plume. We demonstrates for the first time that two-dimensional distributions of sulfur dioxide ($SO_2$) and nitrogen dioxide ($NO_2$) in power plant emissions can be determined simultaneously in terms of SCD distribution. The $SO_2$ SCD values generally decreased with increasing distance from the stack and with distance from the center of the plume. Meanwhile, high $NO_2$ SCD was observed at locations several hundred meters away from the first stack due to the ratio change of NO to $NO_2$ in NOx concentration, attributed to the NO oxidation by $O_3$. The results of this study show the capability of the Imaging-DOAS technique as a tool to estimate plume dimensions in power plant emissions.

• Korean Chemical Engineering Research
• /
• 제61권3호
• /
• pp.368-377
• /
• 2023

천연가스복합발전 공정은 일반 석탄 화력발전 공정에 비해 이산화탄소 배출량이 낮아 최근에 발전 플랜트로서 많은 관심을 받고 있다. 그럼에도 불구하고 이산화탄소 배출을 완전히 억제하기는 어려우므로 이산화탄소 포집공정이 필요하며 본 연구에서는 천연가스복합발전 플랜트에서 발생하는 배기가스 내 낮은 이산화탄소 농도를 고려해 포집공정을 구성하고 운전조건을 최적화하는 연구를 수행하였다. 최적화 연구를 위해 상용 시뮬레이션 프로그램으로 천연가스복합발전 공정과 습식 이산화탄소 포집공정이 결합된 전체 공정을 모델링 하였으며, 이를 이용해 다양한 조건에서 이산화탄소 흡수율, 흡수제 재생율, 천연가스복합발전 공정 내 전력 손실율을 종합적으로 고려한 최적 운전조건을 도출하였다. 특히 본 연구에서는 기존에 이산화탄소 포집공정에서 포집된 이산화탄소 톤당 에너지 소모량만을 주요 지표로 검토하던 것과 달리, 천연가스복합발전 공정 내 스팀 사용으로 인한 발전효율 저감, 운전조건 변화에 따른 이산화탄소 흡수율 및 흡수제 재생율 변화의 측면도 함께 고려하여 공정 전반의 성능을 종합적으로 고려할 수 있도록 하였다. 결론적으로 재생탑 재비기 온도가 120 ℃가 되었을 때 가장 좋은 결과를 보이는 것으로 나타났으며, 그 원인을 분석하였다.

• 전기학회논문지
• /
• 제61권11호
• /
• pp.1706-1712
• /
• 2012

The Beta-ray absorption method (BAM) gives a good solution for measuring the mass concentration of atmospheric particles(PM10 and PM2.5). To determine particular matters (PM) concentration, a ratio of the number of detected beta-ray intensity passing through the clean filter and the dust-sampled filter is used. These intensity data measured in air pollution monitoring such as PM10 and PM2.5 usually contained the additive noise(thermal noise, power supply noise and etc.). Therefore, the estimation performance of mass concentration can be deteriorated by these noises. In this paper, we present a new noise reduction method that is essentially required to develope an automatic continuous PM monitoring system using beta-ray absorption method. By combining the block data averaging technique and curve fitting, in the proposed method, the additive noise can be reduced in the measured data. To evaluate the performance of the proposed method, computer simulations were performed with computer generated signals as the input.

• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.892-901
• /
• 2018

Because of excellent electrical properties, epoxy resin is widely used in packaging and casting power equipment. Moisture and temperature in the environment are inclined to seriously affect the insulation tolerance of epoxy resin. This work focuses on the aging characteristics of epoxy resin in hygrothermal environment. Scanning electron microscopy images show that there are micro-crack, micro-slit and holes inside aged samples. The moisture absorption process undergoes three equilibrium stages and it does not follow the Fick's second law. Observing the change of hydrogen bonds in the infrared spectra of the dried samples, it is found that chemically moisture absorption immerges when the physical moisture absorption entered the third equilibrium stage. By Debye equation to fit the imaginary part of the dielectric constant, it is concluded that the uniformity of water molecule has a great influence on the electrical conductivity loss. Furthermore, the polarization loss can be more easily affected by water molecules than small free molecules. After the aged samples being dried, their real and imaginary part of the dielectric constant descend, but their original electrical properties cannot completely restored. After chemical moisture absorption appears inside the material, the residual space charges increase significantly and the charge dissipation rate slow down obviously.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.479-482
• /
• 1999

Cured epoxy resins are extensively used for the electrical insulation in high-voltage equipments. The bisphenol A-based epoxy resins lured with azine show, especially, good thermal properties and mechanical resistances. For the technical and economic reasons, varing amount of inorganic fillers are added to endow the required special properties. In the large generators and motors of power plants, epoxy insulation is disclosed to the harsh conditions like the superheated steam and abrupt temperature variation. Hygrothermal aging at elevated temperatures tends to induce degradation in epoxy resins. To predict the effect of this degradation in DGEBA/MDA/SN/zeolite system, we proceeded the forced moisture absorption experiment using the autoclave. The thermal properties of the untreated and treated specimens were analyzed by DSC and TGA under the nitrogen flowing condition. The moisture absorption results showed a weight increase during hygrothermal aging at 1207. At the initial aging period, the system leaded to more or less postcuring but more prolonged environmental aging leaded the discoloration of specimen and lowering the T$_{g}$./.