• Journal of Nutrition and Health
• /
• 제55권4호
• /
• pp.441-449
• /
• 2022

This review is focused on analyzing the limits and shortage of zinc (Zn) for the 2020 Dietary Reference Intakes for Koreans (KDRIs), and provides suggestions for the future establishment of the 2025 KDRIs for Zn. The 2020 KDRIs for Zn have been established to estimate the adequate requirement (EAR), recommended nutrient intakes (RNI), adequate intake (for only 0-5 mon) and tolerable upper intake level (UL). EAR was estimated in 2-stages: the first stage was to construct of the frame of analysis for Zn requirement and the second stage involved a factorial approach by considering the various factors which affect Zn requirement, such as intestinal and urine Zn loss, Zn requirement for growth and development, and Zn absorption rate. For a more precise and accurate establishment of the Zn requirement, we suggest for the following to be considered: 1) considering that Zn is present in minuscule amounts as a trace element in our body, the present values for Zn EAR (as 6-9 mg/d) should be expressed as a decimal point for more accurate DRIs; 2) the frame of analysis for Zn requirement has to be more specifically and should includes the factors which affect Zn requirement; 3) both, the factorial approach and extrapolation method need to be well reviewed and thoroughly understood for establishing precise Zn requirement; 4) currently, human clinical study and balance study (Zn intake, excretion and absorption rate) are limited and more human Zn subject studies are required. All these suggestions are provided to better establish the Zn requirement in the 2025 KDRIs.

• 농업과학연구
• /
• 제49권1호
• /
• pp.11-18
• /
• 2022

A disrupted immune system during pregnancy is involved in pregnancy complications, such as spontaneous abortion, preeclampsia, and recurrent pregnancy loss. This study examined the role of toll-like receptor (TLR) 4 and ASC (apoptosis-associated speck-like protein containing a CARD [c-terminal caspase recruitment domain]) in pregnancy complications using a lipopolysaccharide (LPS)-induced miscarriage mice model. Incidences of miscarriage and embryonic resorption were examined at 9.5 days of pregnancy in wild-type (WT), ASC knockout (KO), and TLR4 KO mice after injecting them with LPS. The fetuses and placenta were obtained after sacrifice at 15.5 days of pregnancy. A significantly lower frequency of fetus absorption was found in TLR4 KO mice, whereas corresponding absorption outcomes were strongly induced in the WT and ASC KO mice upon an LPS injection. As expected, TLR4 KO mice were resistant to LPS-induced abortion. A histological analysis of the miscarried placenta showed increasing levels of the eosin staining of spongiotrophoblast cells without any obvious difference between WT and ASC KO mice. These results suggest that TLR4 KO mice are resistant to LPS, which affects pregnancy persistence, whereas WT and ASC KO mice show high miscarriage rates due to LPS. Moreover, the ASC adaptor is not directly involved in LPS-induced miscarriages, and the NLRP3 inflammasome can be activated by other proteins in the absence of ASC.

• Composites Research
• /
• 제36권5호
• /
• pp.335-341
• /
• 2023

본 연구에서는 고온용 Circuit-analog 전파흡수구조(CA-RAS)를 제안하고, 350℃ 및 열 수분 환경에서의 전파흡수성능 및 인장 물성을 평가하였다. Glass/cyanate ester와 사각형 저항 패턴층을 통해 CA-RAS를 구현하였으며, 자유공간 측정장비를 이용하여 350℃ 환경과 열 수분 환경 노출 후의 반사손실을 측정했다. 또한 ASTM D638 규격에 따라 환경 노출 후의 인장강도를 측정했다. 제안된 CA-RAS는 350℃까지 4 GHz 이상의 -10 dB 흡수 대역과 -20 dB 이상의 피크 값을 보였으며, 열 수분 환경 노출 후에도 전파 흡수 성능의 저하가 확인되지 않았다. 또한 환경 노출 후에도 Glass/cyanate ester의 상온 인장강도 대비 95% 이상의 인장강도 값이 확인되었다. 이를 통해 본 연구에서는 제안된 전파흡수구조의 고온 및 열 수분 환경에 노출되는 저피탐 구조물로서의 적용 가능성을 확인하였다.

• 한국수산과학회지
• /
• 제8권1호
• /
• pp.37-45
• /
• 1975

재동결 명태육의 냉동변성에 미치는 축합인산염처리의 영향을 밝히고져 북양산 냉동명태를 해동하여 fillet로 만든 후 sodium polyphosphate 및 sodium polyphosphate: sodium pyrophosphate(1:1, w/w) 용액에 농도별, 시간별로 침지처리하여 동결저장한 후 해동하였을 때의 육중에 흡수된 인산염량, free drip, expressible drip, drip중의 total solid, total nitrogen 및 DNA함량, 해동시의 fillet의 관능적품질 및 가열조리시 중량감소 등을 실험하여 육질변성의 정도를 비교 검토하였다. 1. 해결전 처리에 의한 육중의 인산염흡수량은 침지시간보다 처리액농도에 더욱 많은 영향을 받았으며, 본 실험 조건하의 전처리육의 인산염함량은 모두 FAO/WHO의 허용기준량이하였다. 2 Drip의 발생량은 육중의 인산염량와 역상관계를 나타 내었고 drip감소에 가장 효과적인 처리조건은 $10\%$, sodium polyphosphate액에 5분간 침지한 것으로 무처리때의 drip 량의 약 $14\%$ 였다. 3. Drip중의 total solid, total nitrogen 및 DNA 함량은 대체적으로 drip량에 비례하는 결과를 나타내었으며, 특히 DNA 감소에 미치는 축합인산염처리의 효과는 컸다. 4. 해동한 fillet의 관능적품질은 고농도처리액에 처리한 것은 광택이 있고, 육질은 강성이 있어 양호하였으나, 저농도액에 처리한 것 및 무처리의 것은 광택과 강성이 좋지 못 하였다. 5. 가열조리시의 감량은 고농도처리액에 장시간 처리한 것은 감량제어의 효과가 다소 있는 듯하였으나, 저농도액에 처리한 것을 그 효과를 인정할 수 없었다.

• 한국의류학회지
• /
• 제29권1호
• /
• pp.35-45
• /
• 2005

The purpose of this study was to evaluate thermal properties of soccer wear with different materials and designs. As a beginning step, the questionnaire survey about the actual condition of soccer wears was conducted. with the results of the questinnaire, two soccer wears with new material and design that were improved in tactile sensations, absorption and ventilation were developed. We evaluated thermal and subjective responses of subjects wearing Korea national soccer team uniform in 1998 World Cup (Uniform 98), soccer wear with new material and same design(New II) and with new material and new design(New I). New I was made with mesh in armhole for improving ventilation. Rectal temperature, skin temperature, clothing microclimate, and heart rate were measured in climatic chamber test(twelve times) and field test(eighteen times). The results were as follows. 1. As the results of the climatic chamber test, rectal temperature was lower in New I and New II than Uniform98, and mean skin temperature was lower in New I than Uniform 98 and New II. Heart rate was lower in New I than New II, and total body weight loss and local sweating were not significantly different by soccer wears. 2. As the results of the field test, rectal temperature was lower in New I than Uniform98 and New II. Mean skin temperature was lower in New II than Uniform98 and New I. Clothing microclimate temperature was lower in New II than Uniform98 and New 1, and clothing microclimate humidity was lower in New I, New II than Uniform 98. Heart rate was lower in New I than Uniform 98, New II and total body weight loss and local sweating were lower in New I, New II than Uniform 98. In conclusion, New I using new design using mesh in armhole and new material using sweat absorbent finishing was excellent from the point of view of physical responses, ventilation and sweat absorption.

• 농업과학연구
• /
• 제17권1호
• /
• pp.45-51
• /
• 1990

본(本) 실험(實驗)은 동력경운기(動力耕耘機)에 탑재(搭載)되는 소형(小型)디젤기관(機關)의 냉각수(冷却水)의 적정량을 구명(究明)하기 위한 기초적(基礎的)인 실험(實驗)으로 냉각수(冷却水) 순환량(循環量) 15, 20, $25{\ell}/min$의 3수준(水準)으로, 변화(變化)시켰을 때의 기계손실(機械損失), 출력(出力), 연료소비율(燃料消費率), 토크, 냉각수흡열양(冷却水吸熱量), 열효율등(熱效率等)에 미치는 영향(影響)을 측정(測定) 분석(分析)한 결과(結果)는 다음과 같다. 1. 공시기(公試機)의 Motoring loss는 상용회전(常用回轉) 2,200rpm에서 1.371kW로 정격출력시(定格出力時)의 기계효율(機械效率)은 79.13%로 외국제품(外國製品)보다 약간(若干) 낮았다. 2. 냉각수(冷却水) 순환량(循環量)을 증가(增加)시킴에 따라 출력(出力)은 증가(增加)되는 경향(傾向)을 보였다. 3. 정격출력시(定格出力時) 연료소비율(燃料消費率)은 냉각수순환량(冷却水循環量) $20{\ell}/min$일때 282.93g/kW-h로서 가장 작게 나타났으며 이때 냉각수(冷却水)의 출구온도(出口溫度)는 $80.9^{\circ}C$이었다. 4. 냉각수(冷却水) 순환량(循環量)의 변화(變化)에 따른 토크의 변화(變化)는 거의 없었다. 5. 기관(機關)의 냉각수(冷却水) 흡열량(吸熱量)은 냉각수(冷却水) 순환량(循環量)의 증가(增加)에 따라 증가(增加)하는 경향(傾向)을 나타내었다. 6. 열효율(熱效率)은 냉각수(冷却水) 순환량(循環量) $20{\ell}/min$에서 32.31%로 가장 높게 나타났다.

• 한국식품과학회지
• /
• 제53권6호
• /
• pp.739-748
• /
• 2021

본 연구에서는 가공용 쌀 이용성 향상을 위한 쌀 가공 제품개발과 쌀 생면 제조 기술 확보를 위해 반응표면분석법을 이용하여 글루텐 프리 쌀 우동의 주원료인 쌀가루, 변성전분(아세틸아디핀산이전분), 트레할로스의 함량에 따른 글루텐 프리 쌀 우동의 품질에 미치는 영향을 분석하고 제조 배합비를 Box-Behnken법을 이용하여 최적화하였다. 반응모형에서 쌀가루 함량이 높을수록 수분흡수율, 부피, 황색도, 탄성, 검성, 씹힘성, 응집성이 증가하였으며 변성전분의 함량이 적을수록 황색도, 탄성이 높았다. 수분함량, 명도, 황색도는 linear 모델로 결정되었으며 p-value는 <0.0001, 0.0113, 0.0214로 유의적 차이를 보였다. 글루텐 프리 쌀 우동 주원료의 배합비는 트레할로스의 첨가 없이 쌀가루 60 g, 변성전분 18.81 g 사용하는 것이 바람직한 것으로 나타났다. 반응표면 분석법을 통한 최적 배합비에 따라 글루텐 프리 쌀 우동을 제조한 결과 백색도는 73.09, 수분 흡수율은 59.73%, 부피 32.61 mL, 탁도 0.44, 조리손실율 5.74%, 용출고형분 함량은 1.86%였다. 이 연구 결과는 글루텐 프리 쌀 우동 제조에 기초자료로 제공되어 향후 제품 개발에 도움이 될 것으로 여겨진다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제42권
• /
• pp.10.1-10.9
• /
• 2020

Background: The aim of this study was to evaluate the long-term clinical stability of implants with acid-etched surfaces sandblasted with alumina using retrospective analyses of the survival rate, success rate, primary and secondary stability, complications, and marginal bone loss of the implants. Methods: Patients who had implants placed (TS III SA, SS II SA, SS III SA, and U III SA) with SA surfaces from Osstem (Osstem Implant Co., Busan, Korea) at the Seoul National University Bundang Hospital, from January 2008 to December 2010 were selected for the study. Patients' medical records and radiographs (panorama, periapical view) were retrospectively analyzed to investigate sex, age, location of implantation, diameter, and length of the implants, initial and secondary stability, presence of bone grafting, types of bone grafting and membranes, early and delayed complications, marginal bone loss, and implant survival rate. Results: Ninety-six implants were placed in 45 patients. Five implants were removed during the follow-up period for a total survival rate of 94.8%. There were 14 cases of complications, including 6 cases of early complications and 8 cases of delayed complications. All five implants that failed to survive were included in the early complications. The survival of implants was significantly associated with the occurrence of complications and the absorption of bone greater than 1 mm within 1 year after prosthetic completion. In addition, the absorption of bone greater than 1 mm within 1 year after prosthetic completion was significantly associated with the occurrence of complications, primary stability, and implant placement method. Five cases that failed to survive were all included in the early complications criteria such as infection, failure of initial osseointegration, and early exposure of the fixture. Conclusions: Of the 96 cases, 5 implants failed resulting in a 94.8% survival rate. The failed implants were all cases of early complications such as infection, failure of initial osseointegration, and early exposure of the fixtures. Periimplantitis was mostly addressed through conservative and/or surgical treatment and resulted in very low prosthetic complications. Therefore, if preventive measures are taken to minimize initial complications, the results can be very stable.

• 한국식품과학회지
• /
• 제52권6호
• /
• pp.655-660
• /
• 2020

본 연구를 통해 고아밀로스 옥수수 전분과 이를 가수분해한 덱스트린을 첨가함으로써 건면의 품질에 미치는 영향을 살펴보았다. 고아밀로스 전분이나 덱스트린을 첨가함으로써, 아밀로스-지질 복합체가 형성되었지만, 그 정도가 미미한 편이었다. 고아밀로스 전분이나 덱스트린을 건면에 첨가함으로써, 수분 흡수율과 인장강도가 감소하고, 경도와 점착력이 증가하는 경향을 보였다. 또한 고아밀로스 전분이나 덱스트린 첨가 건면의 단면이 조금 더 밀집한 구조를 보이게 되었다. 하지만 가수분해정도가 큰 Dextrin50의 경우에는 다른 덱스트린과는 다르게 용출율을 증가시키고, 느슨한 구조의 단면을 보였다. 이는 건면의 조직감에도 영향을 미쳐, Dextrin50 첨가군은 다른 첨가군보다 더 낮은 탄성과 경도를 보이고 점착력이 증가하는 특성을 보이게 된다. 본 연구결과에 따르면, 고아밀로스 옥수수 전분과 덱스트린을 건면에 첨가했을 때, 명확한 아밀로스-지질 복합체가 형성되지는 못했지만, 수분흡수율, 용출율 미세구조, 조직감에 영향을 주었다고 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제15권3호
• /
• pp.56-67
• /
• 1987

Plywoods used for construction as a decorative interior material are inflammable and can make fire accidents, causing destruction of human life and property. Therefore, it is indeed required to make fire-retardant treated plywood. In this study, 3.7mm yellow meranti plywoods were soaked in 18% boric acid solutions and tap water by hot-cold bath for 1/2, 2/2, 4/2, 6/2 hours and redrying of treated plywoods was carried out by press drying at the platen temperature of 110, 130, 160, $180^{\circ}C$ and then it was conducted to investigate solution absorption, drying rates, dynamic young's modulus. specific gravity and fire-retardant factors such as burning point, flame spread length. flame exhausted time, back side carbonized area and weight loss by treating time, treating solutions and platen temperature. The results are as follows; 1. When plywood was impregnated with the hot bath temperature of $70^{\circ}C$ for 1. 2, 4, 6 hours and the cold bath temperature of $15^{\circ}C$ for 2 hours respectively, retentions of boric acid were 1.565, l.597, 1.643, 1.709kg/$(30cm)^3$ and all of them exceeded the minimum retention [1.125kg/$(30cm)^3$] even in the shortest treatment. 2. In hot-cold bath method for 1/2 hours, the drying rates of treated plywood remarkably increased with the extension of platen temperature of 110, 130, 160, $180^{\circ}C$ and the values of boric acid treated plywood were 5.900, 10.196, 45.42, 54.958m.c%/min and the values of water treated plywood were 6.014, 12.373, 46.520, 55.730m.c%/min and drying rates of water treated plywood were faster than those of boric acid treated plywood. 3. The values of boric acid treated plywoods in dynamic young's modulus were widely higher than those of water treated plywoods. And it can be observed that there were highly significant differences for treating time between dynamic young's modulus, and the values of boric acid plywoods increased with the extension of treating time but on the contrary water treated plywoods were decreased values with prolonged time 4. It was observed that there were highly significant differences for platen temperature between dynamic young's modulus. When the values of water treated plywoods in dyna nic young's modulus were abruptly decreased according to the rise of platen temperature. boric acid treated plywoods showed rather increased values at $160^{\circ}C$ of platen temperature. And in 2- way interactions, there were also highly significant for dynamic young's modulus between treating time x treating solutions and platen temperature x treating solutions. 5. Correlation coefficients of fire-retardant factors were shown in table 5. It could be recognized that there were close correlations between the treating solutions and burning point, flame spread length, back side carbonized area, flame exhausted time and weight loss, but there was no correlation between fire-retardant factors and treating time and platen temperature. 6. From table 6, it can be observed that there were highly significant differences for burning point, flame spread length, flame exhausted time, back side carbonized area, weight loss between treating solutions. And in 2-way interactions, there were highly significant for burning point, flame spread length, weight loss between treating time $\times$ treating solutions.