• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.575-586
• /
• 2008

The main objective of this paper is to develop an improved model for the analysis of liquefaction potential and to predict excess pore pressure (EPP) using the proposed model that can simulate behavior of saturated sand under earthquake loading conditions. The damage concept is adopted for the development of the proposed model. For the development of the model, a general formulation based on experimental results and damage potential using cumulative absolute velocity (CAV) is proposed for a more realistic description of dynamic responses of saturated sand. Undrained dynamic triaxial tests are conducted using earthquake loading conditions. Based on test results, the NCER-NCW function in terms of $w_d$ and CAV is developed. Procedure for the evaluation of EPP and determination of model parameters for the proposed model is presented as well. For the determination of initial liquefaction, the minimum curvature method using the NCS-NCW curve is proposed. It is observed that predicted initial liquefaction using the proposed method agrees well with measured initial liquefaction. From results of additional undrained dynamic triaxial tests, it is seen that predicted EPP generation using the proposed model agrees well with measured results for earthquake loading cases.

• Journal of Broadcast Engineering
• /
• v.18 no.5
• /
• pp.730-737
• /
• 2013

In this paper, Constrained One-Bit Transform (C1BT) based motion estimation using extension of matching error criterion is proposed. C1BT based motion estimation algorithm exploiting Number of Non-Matching Points (NNMP) instead of Sum of Absolute Differences (SAD) that used in the Full Search Algorithm (FSA) facilitates hardware implementation and significantly reduces computational complexity. However, the accuracy of motion estimation is decreased. To improve inaccurate motion estimation, this algorithm based motion estimation extending matching error criterion of C1BT is proposed in this paper. Experimental results show that proposed algorithm has better performance compared with the conventional algorithm in terms of Peak-Signal-to-Noise-Ratio (PSNR).

• Journal of Korea Multimedia Society
• /
• v.25 no.2
• /
• pp.440-449
• /
• 2022

In recent years, the air pollution and Air Quality Index (AQI) has been a pivotal point for researchers due to its effect on human health. Various research has been done in predicting the AQI but most of these studies, either lack dense temporal data or cover one or two air pollutant elements. In this paper, a hybrid Convolutional Neural approach integrated with recurrent neural network architecture (CNN-LSTM), is presented to find air pollution inference using a multivariate air pollutant elements dataset. The aim of this research is to design a robust and real-time air pollutant forecasting system by exploiting a neural network. The proposed approach is implemented on a 24-month dataset from Seoul, Republic of Korea. The predicted results are cross-validated with the real dataset and compared with the state-of-the-art techniques to evaluate its robustness and performance. The proposed model outperforms SVM, SVM-Polynomial, ANN, and RF models with 60.17%, 68.99%, 14.6%, and 6.29%, respectively. The model performs SVM and SVM-Polynomial in predicting O3 by 78.04% and 83.79%, respectively. Overall performance of the model is measured in terms of Mean Absolute Error (MAE), Mean Absolute Percentage Error (MAPE) and the Root Mean Square Error (RMSE).

• Nuclear Engineering and Technology
• /
• v.55 no.4
• /
• pp.1342-1349
• /
• 2023

The planning accuracy of charged particle therapy (CPT) is subject to the accuracy of stopping power (SP) estimation. In this study, we propose a method of deriving a pseudo-triple-energy CT (pTECT) that can be achievable in the existing dual-energy CT (DECT) systems for better SP estimation. In order to remove the direct effect of errors in CT values, relative CT values according to three scanning voltage settings were used. CT values of each tissue substitute phantom were measured to show the non-linearity of the values thereby suggesting the absolute difference and ratio of CT values as parameters for SP estimation. Electron density, effective atomic number (EAN), mean excitation energy and SP were calculated based on these parameters. Two of conventional methods were implemented and compared to the proposed pTECT method in terms of residuals, absolute error and root-mean-square-error (RMSE). The proposed method outperformed the comparison methods in every evaluation metrics. Especially, the estimation error for EAN and mean excitation using pTECT were converging to zero. In this proof-of-concept study, we showed the feasibility of using three CT values for accurate SP estimation. Our suggested pTECT method indicates potential clinical utility of spectral CT imaging for CPT planning.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.6
• /
• pp.457-463
• /
• 2007

Various correlations of saturated vapor density in a truncated power series form are tested and compared in this study. Saturated vapor density correlation can be expressed relating logarithmic reduced density to the reduced temperature. Five types of correlation has been investigated using saturated vapor density data for 22 pure substance refrigerants from ASHRAE (American Society of Heating, Reftigerating and Air-Conditioning Engineers, Inc.) property tables and NIST (National Institute of Standards and Technology) Chemistry Webbook. Correlations are fitted to the data points by least squares method. Data points are equally weighted. The best type of correlation among the five types is suggested. The results obtained indicate that the best correlations with 3, 4, and 5 terms yield average AAD's (Average Absolute Deviation) of 0.27%, 0.04%, and 0.02%, respectively, while widely used conventional correlations with 3, 4, and 5 terms yield those of 1.19%, 0.61%, and 0.17%. The suggested type of correlation could reduce the number of terms while improving performance.

• Journal of Distribution Science
• /
• v.21 no.9
• /
• pp.115-121
• /
• 2023

Purpose: This study aimed to deal with disputes between the seller and the buyer in connection with the Letter of Credit (LC) in a sales contract. The Contracts for the International Sale of Goods (CISG) provides the rules on the fundamental breaches which can lead to termination of the sales contract but the CISG is not enough to govern issues arising from the LC disputes when the sales contract is not clear about the payment terms. This paper tried to find some solutions to the disputes by considering international rules, such as the Principles of European Contract Law (PECL). Research design, data and methodology: The methodology applied in this study was an analysis of some court decisions and extended literature review. Results: The study revealed that in contracts for the sale of international goods, the buyer was obliged to open an LC as manner of payment. If the buyer failed to open an LC or amend the terms of the LC, the seller could avoid the contract because this could deprive the seller's expected interest. Conclusions: Few studies in Korea have been comprehensively analyzed in terms of the obligations of regarding the LC with respect to the CISG in court cases. This study suggests safeguarding the buyer and seller when the LC is considered absolute or conditional.

• 한국노년학
• /
• v.39 no.1
• /
• pp.169-188
• /
• 2019

In this study, the author utilizes longitudinal data of the recent 12 years to verify whether the absolute versus relative income of old age has a significant effect on their life satisfaction of life. The findings of this study show that there is a significant difference in life satisfaction of old age according to respondents' relative income of three reference groups based on their asset quintile and residental area and education. In the correlation analysis using the cross-sectional data, the absolute and relative income level was closely related to the life satisfaction. In the panel regression analysis using the 12 years longitudinal data from the Korea National Labour Panel dataset, the income level of counterparts in those reference groups appeared highly significant in determining the level of life satisfaction of the elderly. However, some demographic variables such as age and marital status did not have a statistically significant effect in the long-term perspective. The income of reference groups in terms of asset levels, education and region as well as their own past life satisfaction level had a significant effect on the elders' life satisfaction determination. These results suggest that the relative income hypothesis in terms of life satisfaction among the elderly is more valid than the previous absolute income hypothesis.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.4
• /
• pp.271-277
• /
• 2015

PURPOSE. This study was to evaluate the marginal fit of two CAD-CAM anatomic contour zirconia crown systems compared to lithium disilicate glass-ceramic crowns. MATERIALS AND METHODS. Shoulder and deep chamfer margin were formed on each acrylic resin tooth model of a maxillary first premolar. Two CAD-CAM systems (Prettau$^{(R)}$Zirconia and ZENOSTAR$^{(R)}$ZR translucent) and lithium disilicate glass ceramic (IPS e.max$^{(R)}$press) crowns were made (n=16). Each crown was bonded to stone dies with resin cement (Rely X Unicem). Marginal gap and absolute marginal discrepancy of crowns were measured using a light microscope equipped with a digital camera (Leica DFC295) magnified by a factor of 100. Two-way analysis of variance (ANOVA) and post-hoc Tukey's HSD test were conducted to analyze the significance of crown marginal fit regarding the finish line configuration and the fabrication system. RESULTS. The mean marginal gap of lithium disilicate glass ceramic crowns (IPS e.max$^{(R)}$press) was significantly lower than that of the CAD-CAM anatomic contour zirconia crown system (Prettau$^{(R)}$Zirconia) (P<.05). Both fabrication systems and finish line configurations significantly influenced the absolute marginal discrepancy (P<.05). CONCLUSION. The lithium disilicate glass ceramic crown (IPS e.max$^{(R)}$press) had significantly smaller marginal gap than the CAD-CAM anatomic contour zirconia crown system (Prettau$^{(R)}$Zirconia). In terms of absolute marginal discrepancy, the CAD-CAM anatomic contour zirconia crown system (ZENOSTAR$^{(R)}$ZR translucent) had under-extended margin, whereas the CAD-CAM anatomic contour zirconia crown system (Prettau$^{(R)}$Zirconia) and lithium disilicate glass ceramic crowns (IPS e.max$^{(R)}$press) had overextended margins.

• Journal of Life Science
• /
• v.22 no.9
• /
• pp.1214-1223
• /
• 2012

This study analyzed the in vitro physiological activity of Aconitum pseudolaeve var erectum Nakai (AP) and its effect on perfume on an electroencephalogram (EEG). The results indicated that the absolute alpha power spectrum (AA) and the absolute theta power spectrum (AT) decreased significantly during more than before the inhalation of the AP perfume and its reconstruction perfume. Although there were a little different pattern in the induced part of the wave generated by the inhalation of the AP perfume and its reconstruction perfume, alpha- and theta- were shown equally. In addition, there was the same pattern in which the rate of increase reduced. The results suggest that the perfume of the AP and its reconstruction perfume have a stimulating effect on the brain. In terms of the physiological activity of AP, the activity of AP ethanol extract was significantly higher than that of water extract in DPPH, collagenase, and nitric oxide, except for an astringent effect. The AP ethanol extract was about 80% at 500 ppm in collagenase inhibition activity. In addition, the AP water and ethanol extracts were 50% at 100 ppm in the NO inhibition activity. Based on these results, we conclude that this natural substance could be used in cosmetics and in the development of perfumes.

• Computers and Concrete
• /
• v.11 no.2
• /
• pp.149-167
• /
• 2013

The complete stress-strain behavior of steel fiber reinforced concrete in compression is needed for the analysis and design of structures. An experimental investigation was carried out to generate the complete stress-strain curve of high-performance steel fiber reinforced concrete (HPSFRC) with a strength range of 52-80 MPa. The variation in concrete strength was achieved by varying the water-to-cementitious materials ratio of 0.40-0.25 and steel fiber content (Vf = 0.5, 1.0 and 1.5% with l/d = 80 and 55) in terms of fiber reinforcing parameter, at 10% silica fume replacement. The effects of these parameters on the shape of stress-strain curves are presented. Based on the test data, a simple model is proposed to generate the complete stress-strain relationship for HPSFRC. The proposed model has been found to give good correlation with the stress-strain curves generated experimentally. Inclusion of fibers into HPC improved the ductility considerably. Equations to quantify the effect of fibers on compressive strength, strain at peak stress and toughness of concrete in terms of fiber reinforcing index are also proposed, which predicted the test data quite accurately. Compressive strength prediction model was validated with the strength data of earlier researchers with an absolute variation of 2.1%.