• 제목/요약/키워드: absolute dry density

검색결과 18건 처리시간 0.024초

경량골재 콘크리트의 배합설계 및 목표 콘크리트 기건밀도의 결정 (Mix Design of Lightweight Aggregate Concrete and Determination of Targeted Dry Density of Concrete)

  • 양근혁
    • 한국건축시공학회지
    • /
    • 제13권5호
    • /
    • pp.491-497
    • /
    • 2013
  • 본 연구의 목적은 구조용 경량골재 콘크리트의 배합설계 절차를 확립하고, 설계강도로부터 콘크리트 목표 기건밀도의 범위를 평가하는 것이다. 본 절차를 확립하기 위해, 기존 347 실험데이터의 비선형 회귀분석 및 두 경계조건 (절대용적 및 콘크리트 기건밀도)에 기반한 수학적 모델을 구성하였다. 배합설계 모델제시 결과, 설계강도에 대한 물-시멘트비와 콘크리트 기건밀도는 굵은골재 체적비의 증가와 함께 감소하는데, 이 경향은 모래 경량보다는 전 경량골재 콘크리트에서 현저하였다. 경량골재 콘크리트의 기건단위는 설계강도에 따라 임의의 범위에서 설정되어야 하는데, 이는 제시된 모델에 의해 평가될 수 있다.

공기 상태량에 대한 습공기 밀도 계산 (Moist Air Density Calculation for Air Condition)

  • 김종우
    • 대한기계학회논문집 C: 기술과 교육
    • /
    • 제2권2호
    • /
    • pp.105-111
    • /
    • 2014
  • 지구를 둘러싸고 있는 대기의 하층 부분을 구성하는 기체를 보통 공기라 말한다. 지상 20km 이하에서는 그 성분이 거의 일정한 비율로 존재하며, 질소, 산소, 기타 혼합기체로 구성된다. 공기밀도란 단위 부피 중에 포함된 공기의 질량을 말한다. 공기는 거의 일정한 성분으로 조성된 혼합기체이지만, 수증기는 변동이 큰 성분의 하나이다. 같은 온도, 같은 압력에서는 습공기의 밀도가 건공기의 밀도보다 작다. 보통 밀도는 압력이나 온도 변화에 따라 변화된다. 따라서 풍량 계산에 사용되는 중요 인자인 공기 상태량에 따른 밀도 계산과정과 actual air flow 와 standard air flow 의 관계를 살펴 보고자 한다.

건식생산 및 습식생산시스템에 의해 생산된 순환모래의 품질특성에 관한 연구 (A Study on the Quality Properties of Recycled Sand by Produced Dry Manufacturing System and Wet Manufacturing System)

  • 송하영;이상수;이지환;이윤성
    • 한국건설순환자원학회논문집
    • /
    • 제4권2호
    • /
    • pp.74-84
    • /
    • 2009
  • 본 연구에서는 생산방식에 따라 생산된 고품질 순환모래의 기초물성평가를 통한 품질특성을 실험 실증적으로 평가함으로서, 최종 생산된 순환모래에 대한 성능을 평가하고, 목표 품질의 달성과 향후 성능 보완 및 활용의 확대, 고부가가치 창출을 위한 기초자료를 제시하고자 하였으며, 본 연구의 기초물성 실험결과, 직렬식 건식생산시스템과 병렬식, 소용량 습식생산시스템과 대용량을 거쳐 최종 생산된 순환모래인 RS-IV의 경우 절대건조밀도, 0.08mm체 통과량, 점토덩어리량, 유기이물질함유량에서 KS F 2573(순환잔골재) 기준에 만족하였으나, 흡수율에서는 대 소용량 습식생산시스템을 거쳐 최종 생산된 RS-IV만이 KS F 2573 기준치 5% 이하에 만족하였다. 흡수율의 품질 개선율 경우, 직렬식 건식생산시스템(7.13%), 병렬식(19.89%), 소용량 습식생산시스템(27.41%), 대용량(54.56%), 0.08mm체 통과량 경우, 직렬식 건식생산시스템(22.22%), 병렬식(39.92%), 소용량 습식생산시스템(91.89%), 대용량(98.16%), 점토덩어리량 경우, 직렬식 건식생산시스템(50.34%), 병렬식(76.77%), 소용량 습식생산시스템(98.60%), 대용량(99.32%)등으로 직렬식 건식생산시스템에 비하여 병렬식, 소용량 습식생산시스템에 비하여 대용량, 건식생산시스템에 비하여 습식생산시스템의 품질 개선율이 우수한 것으로 나타났다.

  • PDF

서해 송도 갯벌에서의 동죽(Mactra veneriformis: Bivalvia)의 성장과 생산 (Growth and Production of Mactra veneriformis (Bivalvia) on the Songdo Tidal Flat, West Coast of Korea)

  • 신현출;고철환
    • 한국해양학회지
    • /
    • 제30권5호
    • /
    • pp.403-412
    • /
    • 1995
  • 본 연구에서는 한국 서해 인천 연안의 송도 갯벌 조간대에 서식하는 동죽(Mactra veneriformis)의 성장과 생산을 조사하였다. 표품은 1989년 3월부터 1990년 9월까지 월별로 채집하였다. 각장은 1989년 3월부터 8월까지 단일 규모 모드를 보였보였다. 1989년 9월부터는 1990년 9월부터는 작은 개체들이 출현하기 시작하여 이중모드를 보 였다. 서식밀도는 다소 불규칙적으로 변동하였으나, 대체로 시간이 경과함에 따라 감 소하는 경향을 보였다. 1989 연도군의 서식밀도는 1990년 2월 이후 급격히 증가하였 다. 각장은 봄에 성장이 빠르고, 산란기 이후 여름과 가을에 둔화되며, 겨울에 성장을 멈추었다. 성장률은 연령이 증가될수록 감소하였다. 중량은 산란기 직전에 늦봄에 최 대값을 보이고, 가을에 2차 최대값을 나타내었다. 윤장과 이로부터 역계산한 육질부 건중량으로 연성장을 분석하였다. 각장은 vov bertalanffy 성장 모델에, 건중량은 Gompertz 성장모델에 잘 적합되었다. 1985년군의 L∽가 가장 높고, 1986년 군이 가장 낮았다. 중량의 성장률은 2∼3세에서 최대값을 나타내었다. 1984년군과 1985년군의 W ∽와 성장률이 높았고, 1986년군과 1987년군이 낮았다. 최대성장률이 나타나는 연령은 1986년군과 1987년군이 더 빨랐다. 각장과 중륭의 상대 성장률은 연령에 따라 지수함 수적으로 감소하였다. 육질부 건중량의 생물량은 모든 연령군에서 봄에 높았다가 산란 기 이후 감소하여 겨울에 최저치를 보였다. 생물량은 1990년 8월에 134.6g·m/SUP -2/ 으로 가장 높았다. 1989년도군이 가입한 이후에는 1989년군의 생물량이 총 생물량의 변동을 지배하였다. 1989년 3월부터 1990년 3월까지의 연소연량은 67.9g·m/SUP -2/· y/SUP -1/이었다. 조사기간동안 1989년도군의 누적 생산량이 가장 높았고, 1984년군이 가장 적었다. 생산량은 봄과 가을에 증가하였고, 여름과 겨울에 0의 값을 보였다.

  • PDF

습공기선도 상에 20 종류의 상태 및 과정 값의 작도 (Drawing of Twenty Kinds of State and Process on Psychrometric Chart)

  • 김덕진
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2008년도 하계학술발표대회 논문집
    • /
    • pp.1201-1206
    • /
    • 2008
  • Psychrometric chart displays graphically the thermophysical properties of moist air, so it is very conveniently used in air-conditioning and refrigeration. On general psychrometric chart, there are dry bulb temperature, web bulb temperature, absolute humidity ratio, relative humidity, specific enthalpy, specific volume, sensible heat factor, and enthalpy-humidity difference ratio. However, various state and process values besides aboves can be plotted on psychrometric chart. In this study, we developed the software drawing twenty kinds of lines, that is vapor pressure, mole fraction ratio of vapor, dew point temperature, degree of saturation, density, specific entropy, specific exergy, contact or bypass factor, uncomfort index, discomposition index, predicted mean vote index, predicted percent dissatisfied, and so on. We wish to this software is a help to design, analysis and education.

  • PDF

한국의 모래 -품질평가- (Natural Sand in Korea - Quality Evaluation -)

  • 홍세선;이진영
    • 자원환경지질
    • /
    • 제57권2호
    • /
    • pp.185-204
    • /
    • 2024
  • 이 연구는 국토교통부에서 수행하고 있는 골재자원조사를 통해 2023년까지 조사된 하천, 육상골재에서 천연모래의 약 4,800여 품질시험자료를 분석하여 국내 모래의 지질학적, 물리적, 화학적 특성을 평가하였다. 모래층을 포함하고 있는 국내 제4기 미고결 퇴적층의 평균심도는 10m 내외이다(최대 66m). 퇴적층 내에서의 모래층의 두께는 0.5m~4.0m 구간이 약 70%로 가장 우세하다. 모래층에서의 모래, 자갈, 점토는 대체로 60:20:10의 비율로 나타나며, 모래의 주구성광물은 석영, 사장석, K-장석이며, 부구성광물로는 백운모, 흑운모, 녹니석, 자철석, 녹염석 등이다. 석영은 약 45~75%, 사장석과 K-장석은 각각 약 5~20%, 그 외의 부구성광물은 10% 이내이다. 국내 모래의 평균 입도는 0.5mm~1.0mm로 모래시료의 약 44%가 이에 속한다. 1.0mm~1.5mm 입도는 전체모래의 19%, 0.125mm~0.25mm 입도는 전체모래는 약 9%를 점유하고 있다. 골재로 활용하기 위한 모래의 품질 기준에서 보면 흡수율, 안정성의 거의 모든 모래층에서 품질기준에 적합한 것으로 판정되며, 절대건조밀도는 약 66%가 적합하다.

Orchargrass의 식생 구조 III. 개체밀도의 감소원인 (Vegetational Structure of Orchardgrass Sward III. Decreasing causes of plant density)

  • 이주삼;강치훈
    • 한국초지조사료학회지
    • /
    • 제9권1호
    • /
    • pp.20-25
    • /
    • 1989
  • This experiment was carried out in order to know the decreasing causes of plant density and its relations with pasture productivity by the times of established pasture. The results were summarized as follows, 1. The yield components of dead plant can be used to estimate the changes of pasture productivity by the times of established pasture. 2 . The number of dead plants(PD) showed a quadraticalrelation with mean dry weight of dead plant $W/pl.)$ by the times of established pasture. 3. Relationship between relative number of tillers per dead plant to mean number of tillers of adjacent plants (RNT) and relative ratio of number of tillers per dead plant to number of tillers of plants in the 1st cutting (RNDT) showed highly positive significant correlation in 1 and 3 years old pasture. 4. Less than 100 of RNT were 79.5 %, 71.4 % and 100 % of dead plants in 1, 3 and 5, and 7 years old pasture, respectively. 5. Not exceeding values of RNDT to MRRNT were 89.7 %, 71.4 % and 100 % of dead plants in 1, 3 and 5, and 7 years old pasture. 6 . The values of 79.5 %, 57.2 % and 100 % of dead plants in 1, 3 and 5, and 7 years old pasture were not exceeding to MRRNT and less than 100 of RNT. 7. From the results described above, it was discussed that the relative number of tillers per dead plant(RNT) should be described not absolute deaeasing causes of plant density in 1 and 3 yars old pasture. But, the total number of dead plants in 5 and 7 years old pasture were absolutely influenced by RNT and MRRNT.

  • PDF

Evaluation of feed types based on growth performance, survival, hematology, and resistance in celebes rainbow (Marosantherina ladigesi)

  • Amrullah;Wahidah;Khusnul Khatimah;Ardiansyah;Eka Rosyida;Imam Taufik
    • Fisheries and Aquatic Sciences
    • /
    • 제26권10호
    • /
    • pp.583-592
    • /
    • 2023
  • Celebes rainbow (Marosantherina ladigesi) is one of Indonesia's exported ornamental fish commodities, but the exploitation of this fish only relies on wild catches. The rise of unlimited fishing, especially those using poison, has changed the aquatic environment, threatening sustainability and causing fish extinction. This study aimed to evaluate the effectiveness of several types of feed in improving the absolute growth rate (AGR), specific growth rate (SGR), survival rate (SR), feed conversion ratio (FCR), feed efficiency (FE), hematology, and immune response of Celebes rainbow. The fish used in this study were male ornamental Celebes rainbow (M. ladigesi) weighing 1.32 ± 0.21 g/ind, reared in 54 L-aquariums at a stocking density of 30 individuals/aquarium for six weeks. The fish were fed according to the test diet consisting of live Tubifex sp worms, dry Tubifex sp worms, Spirulina platensis, and crumble pellets. The parameters observed were AGR, SGR, SR, FCR, FE, hematology, intestinal histology, liver histology, and a challenge test with the pathogenic bacteria Aeromonas hydrophila. The results showed that fish-fed live Tubifex sp worms had better AGR, SGR, SR, FCR, FE, hematology, and disease resistance compared to all other treatments. These results indicate that live Tubifex sp worms are the best feed for rearing Celebes rainbow.

바텀애시 및 준설토 기반의 인공 경량골재를 활용한 구조용 콘크리트의 배합설계 절차 (Mix Design Procedure of Structural Concrete Using Artificial Lightweight Aggregates Produced from Bottom Ash and Dredged Soils)

  • 이경호;양근혁
    • 한국건축시공학회지
    • /
    • 제18권2호
    • /
    • pp.133-140
    • /
    • 2018
  • 이 연구의 목적은 바텀애시 및 준설토 기반의 인공 경량골재 콘크리트의 합리적 배합설계 절차를 제시하는 것이다. 25 배합의 실험결과를 바탕으로 경량골재 콘크리트의 목표성능(압축강도, 절건 밀도, 초기 슬럼프, 공기량)에 대하여 물-시멘트 비, 단위 시멘트양, 경량 잔골재 치환율을 결정하는 식을 제시하였다. 제안된 식과 절대용적 배합의 개념으로부터 각 구성요소들의 단위용적중량을 산정하였다. 제시된 배합설계 절차는 기존 결정에 효율적으로 이용될 수 있다.

Prediction of unconfined compressive and Brazilian tensile strength of fiber reinforced cement stabilized fly ash mixes using multiple linear regression and artificial neural network

  • Chore, H.S.;Magar, R.B.
    • Advances in Computational Design
    • /
    • 제2권3호
    • /
    • pp.225-240
    • /
    • 2017
  • This paper presents the application of multiple linear regression (MLR) and artificial neural network (ANN) techniques for developing the models to predict the unconfined compressive strength (UCS) and Brazilian tensile strength (BTS) of the fiber reinforced cement stabilized fly ash mixes. UCS and BTS is a highly nonlinear function of its constituents, thereby, making its modeling and prediction a difficult task. To establish relationship between the independent and dependent variables, a computational technique like ANN is employed which provides an efficient and easy approach to model the complex and nonlinear relationship. The data generated in the laboratory through systematic experimental programme for evaluating UCS and BTS of fiber reinforced cement fly ash mixes with respect to 7, 14 and 28 days' curing is used for development of the MLR and ANN model. The data used in the models is arranged in the format of four input parameters that cover the contents of cement and fibers along with maximum dry density (MDD) and optimum moisture contents (OMC), respectively and one dependent variable as unconfined compressive as well as Brazilian tensile strength. ANN models are trained and tested for various combinations of input and output data sets. Performance of networks is checked with the statistical error criteria of correlation coefficient (R), mean square error (MSE) and mean absolute error (MAE). It is observed that the ANN model predicts both, the unconfined compressive and Brazilian tensile, strength quite well in the form of R, RMSE and MAE. This study shows that as an alternative to classical modeling techniques, ANN approach can be used accurately for predicting the unconfined compressive strength and Brazilian tensile strength of fiber reinforced cement stabilized fly ash mixes.