• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2000년도 추계총회,초청강연,특별강연,연구발표회
• /
• pp.84.2-84
• /
• 2000

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 추계총회 및 연구발표회 초록집
• /
• pp.86.1-86
• /
• 2003

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2003년도 추계학술발표대회 요약집
• /
• pp.340.2-340.2
• /
• 2003

• 대한수의학회지
• /
• 제34권1호
• /
• pp.49-54
• /
• 1994

Teratogenic effects of diazinon were assessed on morphology of chick embryos cholinergic blocking agents. Diazinon at doses ranging from 25 to $2000{\mu}g/egg$, was injected on Day 3 of incubation. $TD_{50S}$, were different for the various teratogenic sings such as wry neck, micromelia, abnormal feathering, abnormal beak and curled claws. The threshold dose for wry neck was higher than the threshold dose for other signs; $40{\mu}g/egg$ produced substantial micromelia, abnormal feathering, abnormal beak and curled claws, but gave no sings of wry neck. In contrast to the teratogenic doses, the $LD_{50}$ of diazinon was very high(above $2000{\mu}g/egg$). One of the characteristics of diazinon-induced teratogenesis was reduction of body weight(78.8%) and body length(73.8%). Maximal teratogenic effects, scored as sings of retarded growth, wry neck, micromelia, abnormal feathering, abnormal beak, and curled claws, were produced when the insectcide was administered on the third or fourth day. The threshold dose for type II teratogenic sings including wry neck and short neck was higher than for type I including micromelia and abnormal feathering. Morphorlogical studies, using atropine and gallamine, suggested that nicotinc but not muscarinic receptors may be involved in the mechanism of diazinon-induced type II malformations.

• Applied Microscopy
• /
• 제47권3호
• /
• pp.203-207
• /
• 2017

A homogeneous $KNbO_3$ (KN) phase was formed by sintering at $1,040^{\circ}C$ for 1 hour, without formation of the $K_2O$-deficient secondary phase even though suffering the minor loss of $K_2O$. KN liquid phase was formed during sintering and abnormal grain growth occurred in this specimen. The detailed microstructural observations on KN during sintering were carried out using high resolution transmission electron microscopy. The ledged structures were found at the KN grain boundary and the abnormal grain growth was performed by the lateral migration of these ledges in the presence of the liquid phase. The liquid pockets were found in the KN grains. They have various external shapes mainly due to the kinetic factors. They have atomically flat interfaces with some ledges with one atomic height. The slight deficient $K_2O$ by evaporation might somewhat reduce the melting point of KN from the reported at $1,058^{\circ}C$. The liquid pockets play an important role in supplying the liquid phase during the abnormal grain growth in the sintering process of KN ceramics.

• 원예과학기술지
• /
• 제19권3호
• /
• pp.362-366
• /
• 2001

1998년 8월 중순 경북 북부지역에 있었던 집중호우에 의한 하천 범람으로 침수된 과수원을 군위, 의성, 안동에서 지역별 6개 과수원씩, 총 18개 과수원을 대상으로 '후지' 사과나무의 생육 상황과 주요 병해 이병률을 조사하였다. 조사 과수원의 침수 깊이는 70cm-350cm였고, 침수 기간은 6시간-72시간이었다. 침수 피해 사과원의 낙엽률, 발아율 및 이상개화 현상은 침수 깊이가 깊을수록, 침수 기간이 길어질수록 증가하였다. 새 뿌리 발생은 침수 기간이 길어질수록 급격히 감소하였고, 침수로 인한 뿌리 고사율은 16.2%로 나타났다. 잎의 갈색무늬병, 과실의 부패병, 역병 발생이 무침수 과원에 비해 크게 증가하였고, 조사 항목 간 상관분석 결과, 침수에 의한 이상 생육과 발병 증가가 침수 깊이보다는 침수 기간에 더 큰 영향을 받는 것으로 조사되었다.

• Progress in Superconductivity
• /
• 제7권2호
• /
• pp.145-151
• /
• 2006

Nickel and nickel-tungsten alloy were electroplated on a cold rolled and heat treated copper(Cu) substrate. 4 mm-thick high purity commercial grade Cu was rolled to various thicknesses of 50, 70, 100 and 150 micron. High reduction ratio of 30% was applied down to 150 micron. Rolled texture was converted into cube texture via high temperature heat treatment at $400-800^{\circ}C$. Grain size of Cu was about 50 micron which is much smaller compared to >300 micron for the Cu prepared using smaller reduction pass of 5%. 1.5 km-long 150 micron Cu was fabricated with a rolling speed of 33 m/min and texture of Cu was uniform along length. Abnormal grain growth and non-cube texture appeared for the specimen anneal above $900^{\circ}C$. 1-10 micron thick Ni and Ni-W film was electroplated onto an annealed cube-textured Cu or directly on a cold rolled Cu. Both specimens were annealed and the degree of texture was measured. For electroplating of Ni on annealed Cu, Ni layer duplicated the cube-texture of Cu substrate and the FWHM of in plane XRD measurement for annealed Cu layer and electroplated layer was $9.9^{\circ}\;and\;13.4^{\irc}$, respectively. But the FWHM of in plane XRD measurement of the specimen which electroplated Ni directly on cold rolled Cu was $8.6^{\circ}$, which is better texture than that of nickel electroplated on annealed Cu and it might be caused by the suppression of secondary recrystallization and abnormal grain growth of Cu at high temperature above $900^{\circ}C$ by electroplated nickel.

• 한국물환경학회지
• /
• 제20권3호
• /
• pp.197-205
• /
• 2004

Batch test methods have developed for a long time to measure kinetic and stoichiometric parameters which are required to perform steady state design and mathematical modelling of activated sludge processes. However, at various So/Xo ratios, abnormal behaviors of ordinary heterotrophic organism in batch tests have been reported in many researches. Thus, in this research, abnormal behaviors of heterotrophs in batch tests were investigated at various So/Xo conditions by measuring and interpreting oxygen utilization rate. As So/Xo ratio increased, the calculated values of maximum specific growth rates, ${\mu}_{H,max}$ and $K_{MP,max}$, increased. However, at a certain point of So/Xo (around 10mgCOD/mgMLAVSS), ${\mu}_{H,max}$ and $K_{MP,max}$ values started to decrease. According to this observation, three prominent behaviours of heterotrophs were identified at various So/Xo conditions. (1) At low So/Xo region (below 5 mgCOD/mgMLAVSS), the oxygen utilization rate of heterotrophs in batch tests were almost stable and consequently yielded lower maximum specific growth rate. (2) At high So/Xo region (up to 5~10 mgCOD/mgMLAVSS), oxygen utilization rate incresed sharply with time and indicated more upward curvature than the predicted OUR with conventional activated sludge model, which consists of single hetetrotrophs group. Thus, in this region, competition model of two organisms, fast-grower and slow-grower, seemed to be appropriate. (3) At extremely high So/Xo region (over 10mgCOD/mgMLAVSS), significant oxygen utilization rate was still observed even after depletion of readily biodegradable COD. This might be caused by retarded utilization of intermediates which were generated by self inhibition mechanism in the process of RBCOD uptake.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 1999년도 제6회 산화철국제워크샵 DIGESTS OF THE INTERNATIONAL WORKSHOP ON IRON OXIDES
• /
• pp.1-63
• /
• 1999

Generation of abnormally large grains in the microstructure of small grains has been investigated on some ferrites. Some fractions of large grains were observed in the microstructure of sintered ZnFe$_2$O$_4$, Mn-ZnFe$_2$O$_4$, Fe$_3$O$_4$(in N$_2$) and MnFe$_2$O$_4$(in air). On the other hand, the large grains were not observed in NiFe$_2$O$_4$ and CoFe$_2$O$_4$, independent of calcining and sintering conditions. The large grains seem to be generated in such ferrites that are easy to vary their compositions or valencies at high temperatures. As the sintering proceeded, the number of large grains was increasing to form a continuous structure consisting of large grains, while the size of large grains did not increase remarkably. In addition, the growth of small grains was also very slow during the generation of the large grains. The large grains appeared to be suddenly generated after some induction periods. Avrami equation could be applied to the relation between net volume of large grains and sintering time. Thus, the grain boundaries may be strongly stabilized when the large grains are generated. The large grain in generated by the local activation of the stabilized grain boundaries, which is caused by the variation of compositions or valencies during sintering. It is concluded that the essence of the abnormal grain growth is not the generation of abnormally large grains, but the abnormal stabilization and the local activation of the grain boundaries.

• 대한의료기공학회지
• /
• 제7권1호
• /
• pp.1-29
• /
• 2003

Research studies of Qigong therapy for cure for the past 20 years were reviewed from three different categories: clinical study on human patients, in-vitro study of abnormal cells, and in-vivo study of abnormal cell with Qigong therapy, in an attempt to understand the role Qigong therapy plays in many kinds of disease. There is a lot of evidence suggesting that Qigong therapy has an inhibitory effect on abnormal cell growth, both in vitro and in vivo studies, as well as in clinical observation (often there was room for improvement in these studies and some studies require replication in order to verify their findings). Qigong therapy is an area that is often neglected by mainstream medicine and research, and it should be seriously examined and considered as an important supplement to conventional treatment.