• Transactions of Materials Processing
• /
• v.13 no.1
• /
• pp.53-58
• /
• 2004

The microstructural changes of Al-Zn-Mg-Cu alloy containing Sc during hot extrusion and post heat treatment were investigated. Two kinds of Al-Sc alloys with different alloying elements (B1, B2) were hot extruded to make T-shape bars at extrusion temperature of $380^{\circ}C$, then the bars were solution treated at $480^{\circ}C$ for 2hrs followed by artificial aging at $120^{\circ}C$ for 24hrs. The interior microstructure of as extruded bar consisted of elongated grains, however, fine equiaxed grains were also observed around surface. The microstructural gradient suggested that different restoration process could proceed during the hot extrusion. For B1 and B2, different grain growth behaviors were found around the surface during the post heat treatment. Rapid grain growth behavior was observed for B1 around the surface, however, it was not observed for B2. Orientation pinning, which was related with the evolution of preferred orientation, and precipitation were thought to be responsible for the rapid grain growth.

• Korean Journal of Materials Research
• /
• v.14 no.4
• /
• pp.246-250
• /
• 2004

We have investigated the effects of boron added to Cu film on the Cu-Ti reaction and microstructural evolution of Cu(B) alloy film during annealing of Cu(B)/Ti/$SiO_2$/Si structure. The result were compared with those of Cu(B)/$SiO_2$ structure to identify the effects of Ti glue layers on the Boron behavior and the result grain growth of Cu(B) alloy. The vacuum annealing of Cu(B)/Ti/$SiO_2$ multilayer structure allowed the diffusion of B to the Ti surface and forming $TiB_2$ compounds at the interface. The formed $TiB_2$ can act as a excellent diffusion barrier against Cu-Ti interdiffusion up to $800^{\circ}C$. Also, the resistivity was decreased to $2.3\mu$$\Omega$-cm after annealing at $800^{\circ}C$. In addition, the presence of Ti underlayer promoted the growth Cu(l11)-oriented grains and allowed for normal growth of Cu(B) film. This is in contrast with abnormal growth of randomly oriented Cu grains occurring in Cu(B)/$SiO_2$ upon annealing. The Cu(B)/Ti/$SiO_2$ structure can be implemented as an advanced metallization because it exhibits the low resistivity, high thermal stability and excellent diffusion barrier property.

• Journal of Magnetics
• /
• v.16 no.3
• /
• pp.300-303
• /
• 2011

The effect of the hot-compaction temperature on the microstructure and magnetic properties of anisotropic nanocrystalline magnets was investigated. The hot-compaction temperature was found to impact both the magnetic properties and the microstructure of die-upset magnets. The remanence of the isotropic precursor increases slightly with the improved hot-compaction temperature, and the grains start to grow on the flake boundary at higher hot-compaction temperatures. After hot deformation, it was found that the change in the magnetic properties was the inverse of that observed with the hot-compaction temperature. Microstructural investigation showed that die-upset magnets inherit the microstructural characteristics of their precursor. For the die-upset magnets, hot pressed at low temperature, scarcely any abnormal grain growth on the flake boundary can be seen. For those hot pressed at higher temperatures, however, layers with large equiaxed grains could be observed, which accounted for the poor alignment during the hot deformation, and thus the poor magnetic properties.

• Research in Plant Disease
• /
• v.12 no.1
• /
• pp.5-9
• /
• 2006

Grain discoloration, caused by several microorganisms, is a minor disease, but it is gaining importance in almost all rice growing areas of the world in recent years. Such grains are of low market value and consumption appeal in addition to their abnormal performance as seed of source of nutrient value. When the casual agents were inoculated on rice plant,'Ilmi-byeo'(at right before heading time and on heading time), the incidence of rice ear blight caused by Alternaria alternate and Nigrospora oryzae was higher in a plot inoculated at right before heading time than (in n plot inoculated) on heading time. Meanwhile, the incidence of rice ear blight caused by Bipolaris oryzae and Curvularia lunate was higher in a plot inoculated on heading time than in a plot inoculated at right before heading time. In rice quality, the ratio of imperfect grains was increased at right before heading time or on heading time by Nigrospora oryzae or Alternaria alternata, respectively. As discoloration rate of rice grains increased on 'Ilmi-byeo', the percentage of perfect grains decreased proportionally and the percentage of damaged rice grains increased remarkably.

• Applied Microscopy
• /
• v.47 no.3
• /
• pp.203-207
• /
• 2017

A homogeneous $KNbO_3$ (KN) phase was formed by sintering at $1,040^{\circ}C$ for 1 hour, without formation of the $K_2O$-deficient secondary phase even though suffering the minor loss of $K_2O$. KN liquid phase was formed during sintering and abnormal grain growth occurred in this specimen. The detailed microstructural observations on KN during sintering were carried out using high resolution transmission electron microscopy. The ledged structures were found at the KN grain boundary and the abnormal grain growth was performed by the lateral migration of these ledges in the presence of the liquid phase. The liquid pockets were found in the KN grains. They have various external shapes mainly due to the kinetic factors. They have atomically flat interfaces with some ledges with one atomic height. The slight deficient $K_2O$ by evaporation might somewhat reduce the melting point of KN from the reported at $1,058^{\circ}C$. The liquid pockets play an important role in supplying the liquid phase during the abnormal grain growth in the sintering process of KN ceramics.

• Journal of the Korean Ceramic Society
• /
• v.27 no.3
• /
• pp.423-429
• /
• 1990

YBa2Cu3Ox ceramics superconductors fabricated using solid state reaction usually contain second phases, such as BaCuO2 and CuO. These second phases are located long the grain boundaries and enhance the abnormal growth of YBa2Cu3Ox grains and, consequently, generate the microcracks. These second phaases were reduced by adding Y2BaCuO5 into solid state reacted YBa2Cu3Ox ceramics. Y2BaCuO5 reacts with grain boundary second phases and reduces the grian size of the ceramics. It was observed the critical current density was improved by adding Y2BaCuO5 into solid state reacted YBa2Cu3Ox ceramic superconductor.

• Journal of Powder Materials
• /
• v.27 no.2
• /
• pp.126-131
• /
• 2020

The grain growth behavior of M-type Sr hexaferrite (SrM) grains is investigated with the addition of MnCO₃. First, the SrM powder is synthesized by a conventional solid-state reaction. The powder compacts of SrM are sintered at 1250℃ for 2 h with various amounts of MnCO₃ (0, 0.5, 1.0, and 4.0 mol%). There is no secondary solid phase in any of the sintered samples. Relative density increases when MnCO₃ is added to the SrM. Obvious abnormal grain growth does not appear in any of the SrM samples with MnCO₃. The average grain size increases when 0.5 mol% MnCO₃ is added to the SrM. However, as the amount of MnCO₃ increase to over 0.5 mol%, the average grain size decreases. These observations allow us to conclude that the growth of SrM grains is governed by the two-dimensional nucleation grain growth mechanism, and the critical driving force for the growth of a grain decreases as the amount of MnCO₃ increases.

• Journal of the Korean Ceramic Society
• /
• v.54 no.4
• /
• pp.285-291
• /
• 2017

This study investigated the effects of grain size and phase constitution on the mechanical properties of $3Y-ZrO_2$ by varying the sintering conditions. The raw powder prepared by a low-cost wet milling using the coarse solid oxide powders was sintered by both pressureless sintering and hot-pressing, respectively. As increasing holding time at $1450^{\circ}C$ for pressureless sintering, it promoted the microstructural coarsening of matrix grains and the phase transformation to tetragonal phase, whereas the bimodal microstructure embedded with abnormal $cubic-ZrO_2$ grains was observed regardless of sintering time. On the other hand, the specimens hot-pressed at $1300^{\circ}C$ for 2 h reached ~ 97% of relative density with homogeneous fine microstructure and mixed phase constitution. It was found that the proportion of untransformed monoclinic zirconia had the most adverse effect on the biaxial strength compared to the impacts of grain size and density. The pressureless sintering of the low-cost powder for prolonged sintering time to 8 h led to a decent combination of mechanical properties ($H_V=13.2GPa$, $K_{IC}=8.16MPa{\cdot}m^{1/2}$, ${\sigma}=981MPa$).

• Korean Journal Plant Pathology
• /
• v.11 no.1
• /
• pp.94-97
• /
• 1995

In 1994, an abnormal rice growth was observed in a 0.5-ha scale farmer's field located at Chogye-Myeon, Hapcheon-Gun, Gyeongnam Province where rice cv. Hwayeongbyeo was seeded directly in dry paddy field conditions. The major symptoms were less stands per acreage, short leaf length, and hypertrophy of root tip portion. The disorder was identified as rice seeding bight caused by Rhizopus sp. The average plant stand per m2 in the infested field was 108, while it was 375 in the normal field, and leaf growth was retarded to less than one-third of healthy plant. The average leaf lengths of infected and healthy seedlings were 12.8cm and 38.9cm, respectively. When the infected seedlings were transplanted to pots, flooded-soil conditions developed no new root growth but upland conditions allowed 11.2 new roots emerging. The length of newly emerged root in infested soil was 5.3cm in upland and 7.1cm in intermediate flooding conditions. However, it was 10.9cm in non-infested soil with intermediate flooding conditions. When the plants were matured, the stem length of infected plants was reduced slightly as compared to normal plants, whereas the length of panicle was not significantly different between infected and healthy plants. The number of panicle per plant, however, greatly different with variation of infection degree. Grain quality such as the number of complete and incomplete grains per panicle, the complete grain weight per panicle, and the weight of 1000 grains was not significantly different.

• Journal of the Korean Society of Food Culture
• /
• v.34 no.6
• /
• pp.748-760
• /
• 2019

This study examined the difference of dietary intake behavior between groups of adults aged >20 years with or without dyslipidemia, and comparing the various types of dyslipidemia, based on the Seventh (2016) KNHANES. Men showed higher rate for triglyceridemia and LDL-cholesterolemia than women and subjects in the age group 50-59 years exhibited the highest incidence of triglyceridemia, total cholesterolemia and HDL-cholesterolemia. The ratio of obese people was higher in most types of dyslipidemias. The top five foods in each group of cereal & grain, meat, vegetable, and fruit were selected for analysis, based on the food frequency. The dyslipidemia group showed higher intake frequencies for mixed grains, cabbage kimchi and leafy vegetable than the no-dyslipidemia group, and the group with high blood total cholesterol for mixed grains, apple, and cutlassfish-croaker. Group with high blood triglyceride showed higher intake frequencies of rice and mackerel-mackerel pike than the other groups of high blood triglyceride. No food showed significant difference in the frequencies between groups of LDL-cholesterol. Group with high blood HDL-cholesterol showed higher intake frequency of bibim-fried rice, deep fried chicken, stir fried chicken, apple, tangerine, banana and butter-margarine. These results indicate that people with high levels of blood total cholesterol are more concerned with food having health benefits than those with abnormal levels of other blood lipid. More information on dietary benefits need to be provided to patients having high levels of triglyceride, LDL-cholesterol and HDL-cholesterol.