• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.3
• /
• pp.353-360
• /
• 1999

An investigation made of the variations of angle of bias on the top of the sleeve cap curve line and calculated easing contraction ratio by capheights(A ; a,h$\times$5,/6) B: A, H/4 +4cm C:A.H/3 D: A.H/ 4+3cm E:AH/4+2cm, F: A,H/4+1cm, G: A,H/4, H:A,H/6, I:A,H/8) and the efects of easing contraction on the cap curve lines of sleeve A, D, G by easing stitch density with the gathering foot: sewing condition-lockstitch industrial machine stitch density(N1.0 ; 38stitches/3cm N1.5: 26stitches/3cm, N2.0 ; 19stitches/3cm, N2.5 ; 14stitches/ 3cm) The results obtained were as follows; 1) The variations of the angle of bias on the top of the sleeve cap curve line by cap heights can be done according to the angle balance (front; $\alpha$-$\beta$ back ; $\alpha$'- $\beta$') between the angle (front ;$\alpha$, $\beta$, back ; $\alpha$'- $\beta$') of bias of the two base-lines. 2) The higher cap height the more higher the calculated easing contraction ratio. 3) The lower the stitch density the higher easing contraction ratio. 4) The effects of easing contraction was that sleeve G was more than sleeve A, D.

• Journal of the Korean Mathematical Society
• /
• v.56 no.5
• /
• pp.1355-1370
• /
• 2019

A curve $X{\subset}\mathbb{P}^r$ has maximal rank if for each $t{\in}\mathbb{N}$ the restriction map $H^0(\mathcal{O}_{\mathbb{P}r}(t)){\rightarrow}H^0(\mathcal{O}_X(t))$ is either injective or surjective. We show that for all integers $d{\geq}r+1$ there are maximal rank, but not arithmetically Cohen-Macaulay, smooth curves $X{\subset}\mathbb{P}^r$ with degree d and genus roughly $d^2/2r$, contrary to the case r = 3, where it was proved that their genus growths at most like $d^{3/2}$ (A. Dolcetti). Nevertheless there is a sector of large genera g, roughly between $d^2/(2r+2)$ and $d^2/2r$, where we prove the existence of smooth curves (even aCM ones) with degree d and genus g, but the only integral and non-degenerate maximal rank curves with degree d and arithmetic genus g are the aCM ones. For some (d, g, r) with high g we prove the existence of reducible non-degenerate maximal rank and non aCM curves $X{\subset}\mathbb{P}^r$ with degree d and arithmetic genus g, while (d, g, r) is not realized by non-degenerate maximal rank and non aCM integral curves.

• Restorative Dentistry and Endodontics
• /
• v.47 no.2
• /
• pp.16.1-16.9
• /
• 2022

Objectives: This study compared the cyclic fatigue resistance of One Curve (C wire) and F6 Skytaper (conventional austenite nickel-titanium [NiTi]), and 2 instruments with thermos-mechanically treated NiTi: Protaper Next X2 (M wire) and Hyflex CM (CM wire). Materials and Methods: Ten new instruments of each group (size: 0.25 mm, 6% taper in the 3 mm tip region) were tested using a rotary bending machine with a 60° curvature angle and a 5 mm curvature radius, at room temperature. The number of cycles until fracture was recorded. The length of the fractured instruments was measured. The fracture surface of each fragment was examined with a scanning electron microscope (SEM). The data were analyzed using one-way analysis of variance and the post hoc Tukey test. The significance level was set at 0.05. Results: At 60°, One Curve, F6 Skytaper and Hyflex CM had significantly longer fatigue lives than Protaper Next X2 (p < 0.05). No statistically significant differences were found in the cyclic fatigue lives of One Curve, F6 Skytaper, and Hyflex CM (p > 0.05). SEM images of the fracture surfaces of the different instruments showed typical features of fatigue failure. Conclusions: Within the conditions of this study, at 60° and with a 5 mm curvature radius, the cyclic fatigue life of One Curve was not significantly different from those of F6 Skytaper and Hyflex CM. The cyclic fatigue lives of these 3 instruments were statistically significantly longer than that of Protaper Next.

• Korean Journal of Clinical Laboratory Science
• /
• v.36 no.2
• /
• pp.199-204
• /
• 2004

Height has become one of the most important factors to determine the pulmonary function test index, and there is a high correlation between them, so that they have been utilized for evaluating pulmonary function test predictive value or nomogram. Therefore, we have tried to find out that difference and if there is any correlation and linear relationship between height and forced expiratory flow curve. There were a total of 163 subjects, male 93 and female 70. This study was done at the Department of Pulmonary Function Test of Jeon-Ju Presbyterian Hospital and we measured the index at the forced expiratory flow curve of FVC, $FEV_{1.0}$, $FEV_{1.0}$/FVC, $FEF_{25-75%}$, and $FEF_{200-1200m{\ell}}$. When we subjected the group of height more than 160cm, there were gradual increments at FVC(p<0.001), $FEV_{1.0}$(p<0.001), $FEF_{25-75%}$(p<0.05) and $FEF_{200-1200m{\ell}}$(p<0.001), but no changes at $FEV_{1.0}$/FVC in terms of forced expiratory flow curve index. We have analyzed the relationship between height and forced expiratory flow curve, there was a close relationship at FVC(r=0.670, p<0.01), $FEV_{1.0}$(r=0.491, p<0.01), $FEF_{25-75%}$ (r=0.175, p<0.05) and $FEF_{200-1200m{\ell}}$(r=0.370, p<0.01) but there was reciprocal relationship at $FEV_{1.0}$/FVC(r=-0.215, p<0.01). We have tried simple regression analysis to see if height affects forced expiratory flow curve index as a sector, and the result was $FVC(\ell)=0.0642{\times}height(cm)-7.2978$(p<0.01, $R^2=0.449$), $FEV_{1.0}(\ell)=0.0407{\times}height(cm)-4.2774$ (p<0.01, $R^2=0.2411$), $FEV_{1.0}/FVC(%)=-0.2892{\times}height(cm)+121.44$(p<0.01, $R^2=0.0464$), $FEF_{25-75%}(\ell/sec)=0.0176{\times}height(cm)-0.7876$(p<0.05, $R^2=0.0237$), $FEF_{200-1200m{\ell}}(\ell/sec)=0.0967{\times}height(cm)-11.037$(p<0.01, $R^2=0.1214$) this was approved statistically. According to this study, if height is taller than average, forced expiratory flow curve index were increased, there was a close relationship between height and forced expiratory flow curve, and there was a linear relationship as sector between height and forced expiratory flow curve index. Therefore, researches that study other factors such as sex, age, weight, body surface area, and obesity indexes other than height should be done to see if there are any further relationships.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.2
• /
• pp.43.1-43.1
• /
• 2010

A novel method to characterize the topology of the early-universe intergalactic medium during the epoch of cosmic reionization is presented. The 21-cm radiation background from high redshift is analyzed through calculation of the 2-dimensional (2D) genus. The radiative transfer of hydrogen-ionizing photons and ionization-rate equations are calculated in a suite of numerical simulations under various input parameters. The 2D genus is calculated from the mock 21-cm images of high-redshift universe. We construct the 2D genus curve by varying the threshold differential brightness temperature, and compare this to the 2D genus curve of the underlying density field. We find that (1) the 2D genus curve reflects the evolutionary track of cosmic reionization and (2) the 2D genus curve can discriminate between certain reionization scenarios and thus indirectly probe the properties of radiation-sources. Choosing the right beam shape of a radio antenna is found crucial for this analysis. Square Kilometer Array (SKA) is found to be a suitable apparatus for this analysis in terms of sensitivity, even though some deterioration of the data for this purpose is unavoidable under the planned size of the antenna core.

• Water for future
• /
• v.24 no.2
• /
• pp.97-108
• /
• 1991

A number of different curve numbers are estimated, and three of them are the basin or composite curve numbers (CN-II and CN-III) evaluated from hydrologic soil cover complex, the observed curve numbers computed from rainfal1-runoff observations and the basin median curve numbers as a median of the observed curve numbers. Based on the observed runoff, CM-II underestimates the effective rainfall meanwhile CN-III overestimates. Hence, for the improvement in estimating effective rainfall, a modulating curve number may be defined as a value in between CN-II and CN-III. Basin median curve numbers produces the closest result to the observed runoff and therefore it can be adopted as a representative curve number for gaged basin.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.8
• /
• pp.137-147
• /
• 2007

Isotropic (instant loading) and Ko (gradual increase loading) consolidation tests were conducted in triaxial test equipment using cylindrical sample (5.0 cm in diameter and 10.0 cm in height) on two marine clay deposits. The duration of primary consolidation was estimated by two curve fitting methods using measured strain. A differential equation of consolidation for drainage in the radial and vertical direction was solved by the implicit finite difference scheme. The results of two curve fitting methods were compared with the numerical solutions to evaluate the appropriate axial loading rate of Ko consolidation and the primary consolidation periods. In addition, primary consolidation periods of the samples with a diameter of 35 mm and a height of 70 mm were calculated. The relation of radial and vertical consolidation coefficients is also presented.

• Journal of Preventive Medicine and Public Health
• /
• v.11 no.1
• /
• pp.31-40
• /
• 1978

For the purpose of estimating the status of physical growth of primary school students in Busan area, the author had performed an investigation and analysis on the physical integrated value for past 6 years of random sampled 656 students (male 374, female 282). The summarized results were as follows : 1. The most rapid growth age of body-height was 7-8 years old as 5.9 cm in male and 10-11 years old in female as 6.5 cm, and the growth curve of body-height was crossed at 10-11 years old. 2. The most rapid growth age of body-weight was 9-10 years old as 3.1 kg in male and 10-11 years old in female as 3.9 kg, and the growth curve of body-weight was crossed at 10-11 years old. 3. The most rapid growth age of chest-girth was 8-9 years old as 3.1 cm in male and 9-10 years old in female as 2.9 cm, and the growth curve of chest-girth was not corssed. 4. The most rapid growth age of sitting-height was 6-7 years old in both sex as 3.3 cm and 3.4 cm, and the growth curve of sitting-height was crossed at 8-9 years old. 5. Using the physical integrated value was much simple and desirable at comparing with the areas. And the physical integrated value of primary school students on Busan area compared to Korean standard physical status was relatively good as body-height +0.33, +0.30, body-weight +0.33,+0.35, chest-girth +0.65, +0.57 and sitting-height +0.10, +0.20 with each sex.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.4
• /
• pp.939-942
• /
• 2016

One of the most important characteristic curves of a solar cell is its current density-voltage (J-V) curve under AM1.5G insolation. Solar cell can be considered as a semiconductor diode, so a diode equivalent model was used to estimate its parameters from the J-V curve by numerical simulation. Active layer plays an important role in operation of a solar cell. We investigated the effect thicknesses and defect densities (N_d) of the active layer on the J-V curve. When the active layer thickness was varied (for N_d = 8×10¹⁷ cm^-3) from 800 nm to 100 nm, the reverse saturation current density (J_o) changed from 3.56×10^-5 A/cm² to 9.62×10^-11 A/cm² and its ideality factor (n) changed from 5.28 to 2.02. For a reduced defect density (N_d = 4×10¹⁵ cm^-3), the n remained within 1.45≤n≤1.92 for the same thickness range. A small increase in shunt resistance and almost no change in series resistance were observed in these cells. The low reverse saturation current density (J_o = 9.62×10^-11 A/cm²) and diode ideality factor (n = 2.02 or 1.45) were observed for amorphous silicon based solar cell with 100 nm thick active layer.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.109-130
• /
• 2002

The purpose of this paper was to make a comparative analysis for the difference of the various kinematic variation which is occurred in the each situation when pitchers throw a straight and a curve ball. Four pitchers, who are two national team players and two high level pitchers, were selected among the right over hand pitchers of D university in the Busan for this paper. The data were analyzed by using 3D equipment. The results of the analysis which was about the elapsed time of the pitching, the movement of the body center-point, the highest height of the left knee, stride length, knee joint angle, shoulder joint angle, elbow joint angle and wrist joint angle in the each section(ST, LKU, HBP, LCF, MCP, BRP) were as follows : 1. Pitching time in the each section and step in the pitching for straight and curve ball was similar. The total elapsed time of the straight and curve ball was 1.78${\pm}$0.07sec and 1.77${\pm}$0.11sec in the order. 2. The position change of the body center to the Z(above below) direction did not show significant difference in the each situation of the section and step between pitching for the straight and curve ball. 3. Height of the left knee did not show significant difference as 125.38${\pm}$11.85cm and 124.95${\pm}$11.63m in the each pitching motion for straight and curve ball. The rate(%H) between height and stride length showed 68.42${\pm}$5.53(%H), 68.40${\pm}$5.45(%H) in the each pitching motion. 4. Pitching for curve ball showed longer stride length than pitching for straight ball that as the stride length was 140.35${\pm}$4.96cm and 144.8${\pm}$1.69cm. The rate(%H) between height and stride length showed 76.9${\pm}$3.77(%H), 79.39${\pm}$2.23(%H) in the each pitching motion. 5. Left knee joint angle did not show significant difference in the ST, LKU and HBP section in the each pitching motion. However, it was shown that knee joint angle was flexed much more in the LFC, MCP and BRP section in the pitching for curve ball. 6. Right shoulder joint angle did not show significant difference in the ST, LKU and HSP section. However, when pitches threw a curve ball in the LKU section. In the LFC section, the right shoulder joint angle was extended much more in the pitching for curve ball, and the angle was extended much in the MCP and BRP section in the pitching for curve ball than straight ball. 7. Right elbow joint angle did not show significant difference in the ST, LKU and HRP section in the two pitching motion. The angle had more flexion in the LFC and MCP section in the pitching for curve ball than the pitching for straight ball. The angle in the each pitching motion for straight ball and curve ball were extended by a narrow margin in the BRP section. 8. Right wrist joint angle was extended much more in the LFC and MCP section in the pitching for curve ball. In the BRP section, the angle was extended much more in the pitching for straight ball than curve ball.