• Journal of Periodontal and Implant Science
• /
• v.32 no.2
• /
• pp.379-388
• /
• 2002

For the success of dental implant, accurate radiographic evaluation is prerequisite for planning the location of the osseointegrated implants and avoiding injury to vital structures. CT/MPR(computed tomography/multiplanar reformation) shows improved visualization of inferior alveolar canal. In order to obtain cross-sectional images parallel to the teeth, the occlusal plane is used to orientate for the axial plane. If the direction of axial plane is not parallel to the occlusal plane, the reformatted cross-sectional scans will be oblique to the planned fixture direction and will not show the actual dimension of the planned fixture's location. If the available bone height which measured in the cross-sectional view is much greater than the actual available bone height, penetration of canal may occur. The aim of this study is to assess the effect of the axial plane to measurement of available bone height for dental implant in computed tomography of the mandible. 40 patients who had made radiographic stents and had taken CT were selected. The sites that were included in the study were 45 molar regions. In the central panoramic scan, the length from alveolar crest to superior border of inferior alveolar canal(available bone height, ABH) was measured in direction of reformatted cross-sectional plane(uncorrected ABH). Then, length from alveolar crest to superior border of canal was measured in direction of stent(corrected ABH). The angle between uncorrected ABH and corrected ABH was measured. From each ABH, available fixture length was decided by $Br{{\aa}}nemark$ system. The results were following ; the difference between two ABHs was statistically significant in both first and second molar(p< 0.01). The percentage of difference more than 1 mm was 8.7% in first molar and 15.5% in second molar. The percentage of difference more than 2 mm was 2.0% in first molar and 6.6% in second molar. The maximum value of difference was 2.5 mm in first molar and 2.2 mm in second molar. The correlations between difference of 2 ABHs and angle was positive correlations in both first and second molar. The correlation coefficient was 0.534 in first molar and 0.728 in second molar. The second molar has a stronger positive correlation. The percentage of disagreement between 2 fixture lengths from two ABHs was 24.4% in first molar and 28.9% in second molar.

• Journal of Radiation Protection and Research
• /
• v.41 no.1
• /
• pp.49-55
• /
• 2016

Background: For the purpose of baseline data collection and enhancement of environmental monitoring the distribution studies of $^{137}Cs$ and $^{90}Sr$ in the soil of Uljin province was performed and the relation between surface soil activities and soil properties (pH, TOC and median of the surface soil) was analyzed. Materials and Methods: For 14 spots within 10 km from the NPP surface soil samples were collected and soils for depth profile were sampled for 3 spots in April 2011. Using ${\gamma}$-ray spectrometry with HPGe detector, the concentrations of $^{137}Cs$ were determined and the concentrations of $^{90}Sr$ were measured by counting ${\beta}$-activity of $^{90}Y$ (in equilibrium with $^{90}Sr$) in a gas flow proportional counter. Results and Discussion: The concentration ranges of $^{137}Cs$ and $^{90}Sr$ were $<0.479-39.6Bq{\cdot}(kg-dry)^{-1}$ (avg. $7.51Bq{\cdot}(kg-dry)^{-1}$) and $0.209-1.85Bq{\cdot}(kg-dry)^{-1}$ (avg. $0.74Bq{\cdot}(kg-dry)^{-1}$) which were similar to the reported values from other regions in Korea. The activity ratio of $^{137}Cs$ to $^{90}Sr$ in surface soils was around 9.67, which is much bigger than the initial value of 1.75 for worldwide fallouts because of faster downward movement of $^{90}Sr$ after fallout than that of $^{137}Cs$. For depth profile studies soils were collected down to 40 cm depth for the locations of Deokgu, Hujeong and Maehwa. The $^{137}Cs$ concentration distribution of the first two showed maximum values at top soils and decreased rapidly in exponential manner, while $^{90}Sr$ showed two local maximum values for soils near top and about 30 cm depth. Through linear fittings between the $^{137}Cs$ and $^{90}Sr$ concentrations of surface soil and pH, TOC and median of the surface soil, the only probable relationship obtained was between $^{137}Cs$ and TOC (determination coefficient $R^2=0.6$). Conclusion: The concentration ranges of $^{137}Cs$ and $^{90}Sr$ in Uljin were similar to the reported values from other regions in Korea. The only probable relationship obtained between activities and soil properties was between $^{137}Cs$ and TOC.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.5
• /
• pp.1051-1062
• /
• 1997

Background : In asthma, airway obstruction is usually reversible, either spontaneously or with treatment. However, the responses to treatment are variable and some patients show an irreversible component of airflow obstruction. This may be associated with structural changes in the airway. To assess the relationship between the difference in airway reversibility and structural changes, we evaluated the HRCT findings and pulmonary function test. Methods : We studied 40 asthmatic subjects who had had acute exacerbation of symptoms and had showed normal chest X-ray findings. They had monitered PEFR daily, and had performed PFT and HRCT within three days after initiation of treatment. According to serial PEFR, they were grouped into 3 categories (Group 0 ; initial PEFR was within normal limit, Group 1 ; revealed increment of 30% in PEFR within 3 days after initiation of treatment, Group 2 ; revealed within 2 weeks) and then grouped again into 4 (Group 0, Group 3 ; reached to normal value of PEFR within 3 days after initiation of treatment, Group 4 ; within 2 weeks, Group 5 ; not within 2 weeks). Results : (1) Age in Group 0 was significantly lower than other groups(p<0.05), but there was no significance in other groups. (2) Duration of asthma in Group 2 was significantly longer than Group 0, 1(p<0.05). (3) FVC(%) and FEV1(%) were significantly decreased with delayed response to the treatment (p<0.05). (4) $FEV_1$/FVC(%) in Group 1, 2 were significantly lower than Group 0(p<0.05). $FEV_1$/FVC(%) in Group 5 was significantly lower than Group 0,3,4 (p<0.05). (5) Air trapping was increased significantly with delayed response to the treatment (p<0.05). (6) Mucus impaction in Group 0 was significantly larger than Group 1,2 (p<0.05). $FEV_1$/FVC(%) in Group 0,4,5 were significantly larger than Group 3 (p<0.05). Conclusion : Difference in reversibility of airway obstruction was associated with age, duration of asthma and severity of initial airflow obstruction There was no definite difference in HRCT findings in asthma.

• Journal of Environmental Policy
• /
• v.7 no.2
• /
• pp.67-90
• /
• 2008

The purpose of this study is to develop indoor air quality management strategies regarding indoor air pollutants while considering various factors affecting indoor pollutants concentration. The Integrated Indoor Air Quality model(IIAQ) developed by Seoul National University is used for this study. The IIAQ model is a tool that can provide an integrated view to indoor environmental pollution by simulating suggested scenarios. The results of the modeling are used to assess health risk. The concentrations that are used for the risk characterization are weighted concentrations based on the period of time in each place and existing Indoor Air Quality(IAQ) standards. The estimated concentration of toluene and formaldehyde for 10 years through the IIAQ model was 207.3 $ug/m^3$ and 36.4 $ug/m^3$ in indoors, and 55.9 $ug/m^3$ and 8.62 $ug/m^3$ in outdoors. These concentrations are lower than the existing IAQ standards. The estimated carcinogenic risk of formaldehyde is up to 1.05E-03 for the adult male group and exceeds 1E-06 for all receptor groups. This value means that cancer could affect one person out of 1000. The estimated non-carcinogenic risk of toluene was lower than 1, which means that there was no serious non- carcinogenic risk. The result of modeling shows that using low emitting indoor sources is the most effective strategy for both formaldehyde and toluene. This risk assessment suggests that the total exposure levels of existing IAQ standards may cause serious carcinogenic risk. In order to avoid uncontrolled risk, it is suggested that the current IAQ standards should be adjusted by taking into account the total amount of exposure from all exposure pathways from indoor and outdoor sources.

• Journal of Aquaculture
• /
• v.18 no.1
• /
• pp.19-25
• /
• 2005

This study was performed to investigate the optimum density for the intensive mass production of cyclopoid copepod, Paracyclopina nana in terms of nauplii and adults production. Effect of three development stages on the fecundity of adult female for nauplii production, survival rate of P. nana nauplii with different initial nauplii culture densities for adults production and cannibalistic feeding behavior of P. nana was examined, respectively. The fecundity of adult female by different female, copepodite ana nauplii density in 2 ml water volume decreased with the density of adult female, but was not affected by the density of either copepodite or nauplii. The average daily nauplii production for a adult female in 8 L water volume was $2.3{\times}10^5$ individuals with the incubation density of 7 adult females/ml, and this average value was significantly higher than those values of 0.6 to $1.7\times10^5$ individuals with the incubation density of 1,3,5, 10 adult females/ml (P<0.05). Survival rate of P. nana nauplil with different initial nauplii culture densities in 5 L vessels for 15 days were 32.7, 30.7, 28.9 and $23.0\%$ with the culture density of 50, 100, 150 and 200 inds./ml, respectively, but these were significantly higher than those of values 19.7 and $18.4\%$ with the culture density of 250 and 300 inds./ml (P<0.05). Cannibalistic behavior of P. nana adults on their offspring was observed, but the behavior decreased when phytoplankton was supplemented though there was no statistical difference (P>0.05). These results may indicate that P. nana is adaptable to the hatchery conditions and this species is cultured at the high densities. Optimum culture density for nauplii and adults production of P. nana were 7 adult females/ml and 200 nauplii/ml, respectively.

• KSBB Journal
• /
• v.23 no.5
• /
• pp.375-380
• /
• 2008

We made an experiment of keeping extension of raw and semi-dried flounder (Pleuronectes herzensteini). Effect of with(WG) or without gill (OG), drying degree (20% drying：20D, 40% drying：40D) and storage temperature (5 and $10^{\circ}C$) and 0.1% chitosan-ascorbate (CA) treatment of vacuum packaging flounder on growth of contaminated microorganism during storage for 10 days were investigated. Total aerobacter (TA) in the OG-treated raw flounder was $0.3{\sim}0.5$ log cycle lower than that of WG-treated flounder and also, number of coliform (CF) and E. coli (CO) in OG were lower compared with WG. Number of TA,. Especially, the TA was $0.42{\sim}1.20$ log cycle lower compared with raw flounder. The TA of the raw flounder stored at $5^{\circ}C$ compared to $10^{\circ}C$ was $0.6{\sim}1.3$ log cycle lower. The growth of total aerobacter, coliform (and E. coli separated from raw flounder in tryptic soy broth were completely inhibited by 0.1% CA. But the growth of TA in the raw and 20% dried flounder was 1.5 log cycle inhibited by 0.1% CA, and the growth of CF and CO were also slightly inhibited. We did value raw sample that treated CA 0D and 20D, and did vaccum packaging at the $10^{\circ}C$ for 10 days, Sensory quality such as appearance, freshness, and texture and overall acceptability after cooking of the 0.1% CA-treated raw and 20% dried flounder were evaluated from good to very good, while CA non-treated products were evaluated to moderate.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.12 no.1
• /
• pp.7-11
• /
• 1983

The purpose of this study was to prepare low methoxyl pectins (LMPs) by pectinesterase (PE) using waste tangerine peels and to compare the chemical, physical and gelling properties of the prepared pectins with the commercial LMP. The LMPs were prepared by treating albedo with 0.25M $Na_2CO_3$ to activate the PE. PE was then inactivated by heating. The sample was centrifuged and the supernatant was collected. LMP was obtained as precipitate by adding alcohol to the collected supernatant. The amounts of extractible pectins in albedo were 12.71~12.98% on a dry weight basis. Methoxyl contents of LMPs prepared by treating albedo with PE at pH 7.5 for 10min, at pH 8.5 for 10min, 20min and 30min were 5.12%, 4.27%, 3.08%, 1.85% respectively, demonstrating that the methoxyl contents of the preparations decreased as the degree of treatment albedo with PE increased. The acetyl contents of the preparations ranged from 0.09% to 0.12%, the values of which do not interfere with gel formation. The anhydrouronic acid contents of the prepared pectins were in the range of 94.2%~94.8%. The values of viscosity and molecular weights of the prepared LMPs tent to decrease as the degree of PE action on albedo increased. The textural value of the prepared LMP gels determined by Consistometer, Ridgelimeter and Instron denonstrated that the excess treatment of albedo with PE significantly impaired the gelling properties of the preparations.

• Journal of Korean Society of Forest Science
• /
• v.53 no.1
• /
• pp.44-55
• /
• 1981

Neutral sulfite precooked fir chips were refined in the Asplund Laboratory Defibrator at various temperature ($20^{\circ}C$, $120^{\circ}C$ and $180^{\circ}C$). The effects of refining temperatures on the physical property and morphological structure of the resulting pulps were discussed. Yields of precooked chips (84%, 92% and 100%) and refining temperature affected remarkably the yield of refined pulp, its beatability, sheet strength and morhphological characteristics. Pulp yield and beatability decreased with increasing refining temperature. Fiber surface of unbeaten pulp from precooked chips of 84% yield was to some extent covered by the secondary wall, while that of the pulp form precooked yield of 92% by the compound middle lamella. In the case of uncooked chips, fibers were damaged heavily, and the exposed fiber surface resulted from the equal amount of the secondary wall and the compound middle lamella. In the case of pulps prepared from precooked chips of higher yields (92% and 100%), sheet strength increased linearly as sheet density increased. But at the same sheet density, pulp from lower precooked yield (84%) had better sheet strength after open discharge refining as compared to pressurized refining, because pulp from the former had much amounts of fines fraction of higher water retention value than the latters. And there was observed a little difference in fiber length distribution but nearly similar in its morphology with increasing refining temperature.

• Journal of Korean Society of Forest Science
• /
• v.80 no.2
• /
• pp.202-209
• /
• 1991

This study was carried out to examine seed germination, seedling growth, and biomass production of Eucommia ulmoides. The results were summarized as follows ; 1. Cold moist stratification at a refrigerator showed 60.3% of seed germination, which is the most effective among pretreatment methods. 2. In case of 1-0 seedlings, sixty seedlings per $1m^2$ was the most appropriate density, and the growth quality of seedlings differed significantly among densities. 3. Height growth showed continuous growth pattern and the maximum growth was shown during the period 21 June to 20 July, which corresponds 32.7% of total annual growth. 4. As tree age and DBH increased, the production of bark and leaf increased, however, its increment rate remarkably dropped down after ten years. 5. When tree age was ten years, the rate of bark volume showed the maximum value, 12.42%. 6. Dry weight of barks and leaves and bark volume were positively related to the growth of DBH and height. 7. As tree age increased, leaf area decreased, but the number of leaves increased.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.2
• /
• pp.253-258
• /
• 2011

To increase utilization of Korean sweet persimmon, white breads containing sweet persimmon were prepared and those characterizations were evaluated. WB (white bread without persimmon), FPB (white bread containing 30% (w/w) persimmon flesh), and WPB (white bread containing 30% (w/w) whole persimmon) were prepared by straight dough method. Specific volumes of WB, FPB, and WPB were 3.51, 2.99 and 3.21 $cm^3$/g, respectively. Loss of bread of WB, FPB, and WPB were 9.81, 7.78, and 8.86%. With addition of sweet persimmon in bread, the lightness (L) was decreased, and the redness (a) and the yellowness (b) were increased. DPPH radical scavenging activity, one of antioxidant activity, of WB, FPB, WPB at concentration of 10 mg/mL was $12.39{\pm}0.135$, $14.57{\pm}0.01$, and $19.57{\pm}0.44%$, respectively. Total phenolic contents of WB, FPB and WPB were $177.05{\pm}5.52$, $185.26{\pm}0.79$, and $216.24{\pm}5.47$ mg GAE/g. Hardness of WB were 175.33 Dyne/$cm^3$, and the value was decreased in FPB and WPB. In sensory test, FPB acquired relatively high points in texture, flavor, taste, and overall acceptance.