• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.3
• /
• pp.229-237
• /
• 2000

According to the functional matrix theory, Delaire proposes that individual occlusal plane was determined by variable effects of teeth, maxilla, mandible, cranium, cranial base and soft tissue matrix including the orofacial musculature. and that there is the ideal occlusal plane determined by the most proper spatial position of maxilla and mandible, functionally and esthetically. This study was designed to find out the relation between Delaire's ideal occlusal plane and muscle activity of masticatory muscles in individuals who have normal maxillo-mandibular relationships. Lateral cephalometric radiographs were taken and his/her individual occlusal plane and ideal occlusal plane were analyzed with Delaire's architectural and structural craniofacial analytic method. For evaluation of muscle activities of masticatory muscles, electromyography of anterior temporal muscle, superficial masseter muscle, and anterior belly of digastric muscle was recorded in fifty Korean normal Angle class I occlusion individuals. According to the average value of ideal occlusal plane, fifty normal Angle class I occlusion individuals were classified into three groups: Ideal occlusal plane group(I group), hyperrotation group(I+ group) and hyporotation group(I- group). The result of this study was as follows: 1. The results of Delaire's architectural and structural craniofacial analysis of lateral cephalography of the fifty Korean normal Angle class I occlusion individuals are that twelve persons(24%) have consistent or parallel with ideal occlusal plane and the average of angular difference was $1.22^{\circ}{\pm}3.69^{\circ}$. 2. There is no significant difference in muscle activities of masticatory muscles during resting(p<0.05), but significant increases of muscle activity of ipsilateral anterior temporal and masseter muscle, contralateral anterior belly of digastric muscle during unilateral chewing and of anterior temporal and masseter muscle during bilateral clenching(p<0.05). 3. To find out the effect of the angular difference between Delaire's ideal occlusal plane and real occlusal plane to muscle activity, muscle activities of masticatory muscles were compared with three groups in each other; I group, I+ group and I- group. The results were no significant differences during resting, unilateral chewing and bilateral clenching.(p>0.05) 4. Although there is no significant differences of masticatory muscle activities among the three groups, the fact that increasing tendency of masseter muscle activity of ideal occlusal plane group(I+) than those of any other groups(I+ and I-) during bilateral clenching was noted. There is only the implication that occlusal plane makes some effects on masticatory muscle activities, espacially that of masseter muscle during bilateral clenching. In conclusion, the hypothesis that occlusal plane is one of the factors which affect the muscle activities of masticatory muscles and that anyone whose occlusal plane consistent with Delaire's ideal occlusal plane has an extraordinary functional advantage in masticatory muscle function cannot be proven with electromyography methods.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.13 no.3
• /
• pp.278-290
• /
• 1991

Prediction of the sop tissue changes following hard tissue movements is very important in the preoperative analysis of surgical changes of the patient who have orthognathic surgery. This study examined post operative changes of the mid-facial sop tissues in Koreans depending upon two major positional changes of the maxilla following Le Fort - I type osteotomy for orthognathic purposes. Sixty patients(41 males and 19 females) of Koreans were selected and divided into two groups according to directional change of movement of anterior bony structures of the Maxilla as follows : Group I (44 patients) was mooed anteriorly and/or inferiorly, and Group II (16 patients) was mooed posteriorly and/or superioly. Postoperative changes of the sop tissue measurements following hard tissue changes were examined on pre - and post - operative cephalometrics by means of computerized digitation methods and the ratios of changes were analysed. The results were obtained as follows : 1. In Group I, all of the sop tissue measures except the Pn was closely followed by the changes of the hard tissue measures in the horizontal plane, but the Sn and the Cm were only correlated to the vertical changes(p<0.001). In group II, all of the sop tissue measures excluding of the N' and the Pn were significantly correlated to the hard tissue measures in horizontal plane(p<0.001), but the Ls and Stm were only correlated relatively to the vertical changes of the ANS(p<0.01). 2. Predictable ratio of the Sn was 66% of the ANS or 56% of the A in the horizontal plane and 89% of the A in the vertical plane in Group I. In Group II, the Sn was predictable as 85% of the ANS or 70% of the A in the horizontal plane but was not predictable in vertical plane. 3. Predictable ratio of the Cm was 28% of the ANS or 50% of the A in the horizontal plane and 56% of the ANS or 36% of the A in the vertical plane in Group I. In Group II, the Cm was predictable horizontally as 74% of the A. Predictable ratio of the Pn was 30% of the ANS or 38% of the A in horizontal plane in Group I, but it was not predictable both horizontally and vertically in Group II. 4. Predictable ratio of the Ls was 52% of the Pr in Group I and 77% in Group II in the horizontal plane. The Stm was predictable as 34% of the pr or 22% of the I in the horizontal plane in Group I, and was also predictable as 55% of the pr or 68% of the I horizontally and 21% of the pr or 65% of the I vertically in Group II. 5. All ratios of change in the thickness. length and area of the upper lip following maxillary movement were statiscally correlated, however, mangitudes of them were meaningful clinically.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.4E
• /
• pp.183-188
• /
• 2002

In this paper, the strong in-plane vibration has been experimentally observed at the end of a finite cylindrical shell. The strong in-plane vibration was generated by the evanescent wave field, which was excited along about half the length of the shell. The evanescent waves were generated due to mode conversion of elastic waves at the ends of the cylindrical shells. The results show that the strong in-plane end vibration can be generated in cylindrical shells.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.2 no.4
• /
• pp.3-9
• /
• 1991

This paper presents the characteristics of antenna factors of half-wave resonance dipole antennas above a ground plane. The current distributions on a horizontal and vertical dipole antennas were analyzed by the Galerkin's method of moments, and these solutions are used for calculating the horizontal and vertical antenna factors above the ground plane. It is shown that accurate antenna factors of the horizontal and vertical dipole above the ground plane are required of the radiated emission test.

• Bulletin of the Korean Mathematical Society
• /
• v.56 no.5
• /
• pp.1159-1186
• /
• 2019

In this paper, we study plane curves of degree 6 with points whose multiplicities of the tangents are 5. We determine all the Weierstrass semigroups of ramification points on double covers of the plane curves when the genera of the covering curves are greater than 29 and the ramification points are on the points with multiplicity 5 of the tangent.

• Structural Engineering and Mechanics
• /
• v.43 no.6
• /
• pp.739-759
• /
• 2012

The tailoring optimization technique recently developed by the author for improving structural response and energy absorption of composites is extended to sandwich shells using a previously developed zig-zag shell model with hierarchic representation of displacements. The in-plane variation of the stiffness properties of plies and the through-the thickness variation of the core properties are determined solving the Euler-Lagrange equations of an extremal problem in which the strain energy due to out-of-plane strains and stresses is minimised, while that due to their in-plane counterparts is maximised. In this way, the energy stored by unwanted out-of-plane modes involving weak properties is transferred to acceptable in-plane modes. As shown by the numerical applications, the critical interlaminar stress concentrations at the interfaces with the core are consistently reduced without any bending stiffness loss and the strength to debonding of faces from the core is improved. The structural model was recently developed by the author to accurately describe strain energy and interlaminar stresses from the constitutive equations. It a priori fulfills the displacement and stress contact conditions at the interfaces, considers a second order expansion of Lame's coefficients and a hierarchic representation that adapts to the variation of solutions. Its functional d.o.f. are the traditional mid-plane displacements and the shear rotations, so refinement implies no increase of the number of functional d.o.f. Sandwich shells are represented as multilayered shells made of layers with different thickness and material properties, the core being treated as a thick intermediate layer.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.3 s.153
• /
• pp.219-227
• /
• 2007

A stereo-PIV (particle image velocimetry) technique is used to investigate the vortical structure of the wake behind a rotating propeller in the present study. A four bladed propeller is tested in a cavitaion tunnel without any wake screen. Hundreds of instantaneous velocity fields are phase-averaged to reveal the three dimensional spatial evolution of the flow behind the propeller. The results of conventional 2-D PIV are also compared with those of the stereo-PIV to understand the vortical structure of propeller wake deeply. The variations of radial and axial velocities in the 2-D PIV results seem to be affected by the out-of-plane motion. generating a little perspective error in the in-plane velocity components of the slipstream. The strong out-of-plane motion around the hub vortex also causes the perspective error to vary the axial velocity component a little at the near wake region. The out-of-plane velocity component had the maximum value of about 0.3U0 in the tip vortices and continued its magnitude in the wake region.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.5
• /
• pp.46-53
• /
• 2011

The effect of a finite substrate on the radiation characteristics of a linear 7-element array antenna positioned along the E-plane is investigated. Active reflection coefficients and average active element patterns are simulated for various substrate sizes. The E-plane radiation pattern of a fully excited array for various scan angles is correlated with the active reflection coefficient and average acitive element pattern. The effect of E-plane substrate size on the radiation characteristics of a linear array along the E-plane is larger than that of H-plane substarte size.

• Journal of electromagnetic engineering and science
• /
• v.12 no.2
• /
• pp.176-184
• /
• 2012

In this paper, the effects of a metal plane on the performance of a meandered slot RFID antenna are evaluated in a real environment, and 3 metal plane cases are considered (the most likely scenarios in which metal conductive materials are placed near the tag antenna). The metal plane effects can be categorized as matching degradation and antenna gain variation. First, matching degradation due to the antenna's induced mutual impedance is experimentally investigated. In addition, the gain variation is investigated to figure out the change in the radiation characteristics. With the derived antenna parameters, the read range is calculated with the Friis transmission equation and measured to analyze the effects of a metal plane on RFID system performance. The calculated and measured read range varies from 9.3 m to 19.1 m as the distance between the RFID antenna and the metal plane changes.

• Economic and Environmental Geology
• /
• v.32 no.4
• /
• pp.365-371
• /
• 1999

Ture diplacement of a fault monement is calculated from the displacement of the index plane such as bedding on an outcrop surface. The input parameters are the orientations of the index, fault, and outcrop planes. It is also necessary to input the orientation of fault striation and the offset distance of the index plane on the outcrop surface. The distances of the total, strike, horizontal and dip slip components of the fault movement are calculated from the input parameters. Hwang(1998) conducted a simlar calculation using trigonoment method. To apply the previous method, the offset distance of the index plane must be measured on a vertical outcrop surface. The calculation method of this study accepts the offset distence of index plane on an outcrop plane of any orientation. Calculation results from both method are indentical, regardless of the simplicity of the new method.