• Journal of Animal Science and Technology
• /
• v.44 no.2
• /
• pp.165-170
• /
• 2002

Mature weight (A) and rate of maturing (k) estimated by nonlinear regression were studied to determine the optimum age range over which the estimate of growth curve parameters can be estimated. The weight-age data from 1,133 Hanwoo bulls at Hanwoo Improvement Center of N.A.C.F. were used to fit the growth curve using Gompertz model. All available weight data from birth to the specific age of months were used for the estimation of parameters: the six specific ages used were 12, 14, 16, 18, 20 22 and 24 months of age. The mean estimates of mature weight (A) were 966.5, 1,255.9, 1,126.2, 916.5, 842.2, 780.9 and 767.0kg for ages 12 through 24 months, respectively. The mean estimates of mature weight (A) to 22 and 24 months of age were not different from each other. However, they were different from the estimates based on the data to other ages. Mean estimates of rate of maturing (k) were 3.362, 3.595, 3.536, 3.421, 3.403, 3.409 and 3.411 for ages 12 through 24 months, respectively. The mean estimates of maturing rate (k) for ages 18 through 24 months of age were not significantly different from each other. However, they were different from the estimates based on the data to other ages. Correlations among estimates of A at various ages showed the highest value of 0.93 between 22 and 24 months. Correlations among estimates of k at various ages were highest ranging from 0.91 to 0.99 among 18 to 24 months. The correlations between A and k were positive and tended to decrease with the increase of the age from 0.84 for the age of 12 months to 0.10 for the age of 24 months. Thus, the estimates of growth curve parameters, A and k, suitable for genetic studies can be derived from accumulated Hanwoo bulls after 22 months of age.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.3
• /
• pp.31-42
• /
• 2006

Drought indices, such as PDSI (palmer Drought Severity Index), SWSI (Surface Water Supply Index) and SPI (Standardized Precipitation Index), have been developed to assess and forecast an intensity of drought. To find the applicability of groundwater level data to a drought assessment, a correlation analysis between SPI and groundwater levels was conducted for each time series at a drought season in 2001. The comparative results between SPI and groundwater levels of shallow wells of three national groundwater monitoring stations, Chungju Gageum, Yangpyung Gaegun, and Yeongju Munjeong, show that these two factors are highly correlated. In case of SPI with a duration of 1 month, cross-correlation coefficients between two factors are 0.843 at Chungju Gageum, 0.825 at Yangpyung Gaegun, and 0.737 at Yeongju Munjeong. The time lag between peak values of two factors is nearly zero in case of SPI with a duration of 1 month, which means that groundwater level fluctuation is similar to SPI values. Moreover, in case of SPI with a duration of 3 month, it is found that groundwater level can be a leading indicator to predict the SPI values I week later. Some of the national groundwater monitoring stations can be designated as DIW (Drought Index Well) based on the detailed survey of site characteristics and also new DIWs need to be drilled to assess and forecast the drought in this country.

• Research in Community and Public Health Nursing
• /
• v.13 no.1
• /
• pp.182-196
• /
• 2002

The purpose of this study was to provide the basic resources for developing a parish nursing program. We did this by investigating what demands were made on the parish nursing service by the parishes or churches under review. The subjects of this study were 96 pastors located throughout the City of Busan. NP (New paragraph) $\gg$ We conducted our research by utilizing a modified version of the study created by Hwang (2000) and by using the help of prior research and professionals gathered from the parish nurse questionnaire by Djupe (1990). The data in this study were collected from July 1 to Oct. 31, 2001, using the questionnaire method. The Data were analyzed by: (a) frequency: (b) percentage: (c) mean: (d) standard deviation, and x^2-test$ with SPSS/PC program. The study has found the follows: 1. For subjects making demands on the parish nursing service, 95.8% were in need of using the services of parish nurses. On the demands of parish nursing service for the subjects, 95.8% the necessity of parish nursing services. And they answered by their intention of asking for parish nursing service practice. 2. Of the subjects under review, 71.9% were part-time workers and 28.1% were full-time employees 71.9% of part time and 28.1% of full times duty. In terms of the method of pay for work, 41.8% were pay free or freelance while 51.2% were on salary. And engagement intention of parish nurse as preacher was 88.5%. 3. The demand for nursing services in various categories were as follows. (a) hospice care: (4.02 1.11), (b) health screening: (3.98 1.09), (c) home visiting: (3.97 1.16), (d) group health education: (3.81 1.12), (e) organization of volunteer groups: (3.75 1.12), (f) individual health education: (3.75 1.14), (g) advice on choosing hospital or hospital consultation: (3.69 1.21) and (h) individual counseling: (3.51 1.31). 4. In terms of the specific services rendered by parish nurses. our study found that services were needed for the following: physical symptom management; preparation before death in spiritual preparation for death, blood pressure check in health examination, home visiting where the patient makes phone call, management of chronic disease in group health education, disease management in individual health education, advice on choosing hospital, or hospital consultation: and physical problems in individual counseling. 5. With respect to whether there was a correlation between what church a pastor came from and the types of demands made, there was NO significant difference found. 6. In relation to the characteristics of the subjects and their church and the hope demands (duty pattern and method of payment and engagement intention of parish nurse as preacher) for parish nurses, these had non significant differences. In conclusion, the perception of parish nursing service is very high. Moreover, we found that there is a great demand for well ordered parish nursing services to promote the health of each congregation. Before doing so, it would be better to make things known and to consider the relevant characteristics shown in the researched results.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.5
• /
• pp.378-382
• /
• 2000

The effects of bisphenol A (BPA), known as one of the endocrine disrupting chemicals (EDCs), on the hatching of fertilized eggs (FE) and the spawning of adult fish in songsari, Oryzias latipes were investigated. In condition of the experimental groups, incubated water temperature was $25.0{\pm}0.5^{\circ}C$ and photoperiod was 16 h (light) : 8 h (dark). fE were exposed to aqueous solutions of BPA at nominal concentration of 50, 100 and $200 {\mu}g/l$. The time required in hatching of FE was long in the BPA $50 and 100 {\mu}g/l$ treatment groups when compared to the controls, and in the BPA $200 {\mu}g/l$ treatment group, FE failed to hatch. And also hatching rate was decreased in the BPA treatment groups in comparison to the controls, Adult fishes were reared to oral administration via a diet of 50, 100 and $200 {\mu}g/g$ body weight BPA concentration for 3 weeks, Number of total eggs spawned in the adult fish were fewer in the BPA 100 and 200 treatment groups than in the controls and BPA 50 treatment group. Frequency of abnormal eggs in the total eggs spawned was 11.8 and $16.2{\%}$ in the control and acetone carrier control lower than 36.8, 46,8 and $74.1{\%}$ in the BPA 50, 100 and 200 treatment groups, respectively. And hatching rate of FE decreased in the BPA treatment groups in comparison to the controls. In these results, inhibition of the hatching of FE and the quantity and quality of spawned eggs in adult fish were observed from BPA treatment groups when compared to the controls.

• The Journal of Small Business Innovation
• /
• v.19 no.2
• /
• pp.53-68
• /
• 2016

Motivation and activities for technological learning, entrepreneurship, innovation, and creativity are driving forces of economic development in Asian countries. In the early stages of technological development, technological learning and entrepreneurship are efficient ways in which to catch up with advanced countries because firms can accumulate skills and knowledge quickly at relatively low risk. In the later stages of technological development, however, innovation and creativity become more important. This study aims to identify a) the factors (learning capabilities) that influence technological learning performance and b) barriers to enhancing innovation capabilities for the creative economy and organizations. The major part of this study is related to learning capabilities in the post-catch-up era. Based on a literature review and observations from Korean experiences, this study proposes a technological learning model composed of various influencing factors on technological learning. Three hypotheses are derived, and data are collected from Korean machine tool manufacturers. Intense interviews with CEOs and R&D directors are conducted using structured questionnaires. Statistical analysis, such as correlation and ANOVA are then carried out. Furthermore, this study addresses how to enhance innovation capabilities to move forward. Innovation enablers and barriers are identified by case studies and policy analysis. The results of the empirical study identify several levels of firms' learning capabilities and activities such as a) stock of technology, b) potential of technical labor, c) explicit technological efforts, d) readiness to learn, e) top management support, f) a formal technological learning system, g) high learning motivation, h) appropriate technology choice, and i) specific goal setting. These learning capabilities determine firms' learning performance, especially in the early stages of development. Furthermore, it is found that the critical factors for successful technological learning vary along the stages of technology development. Throughout the statistical and policy analyses, this study confirms that technological learning can be understood as an intrinsic principle of the technology development process. Firms perform proactive and creative learning in the late stages, while reactive and imitative learning prevails in the early stages. In addition, this study identifies the driving forces or facilitating factors enhancing innovation performance in the post catch-up era. The results of the preliminary case studies and policy analysis show some facilitating factors such as a) the strategic intent of the CEO and corporate culture, b) leadership and change agents, c) design principles and routines, d) ecosystem and collaboration with partners, and e) intensive R&D investment.

• Journal of the Korean Electrochemical Society
• /
• v.9 no.3
• /
• pp.124-131
• /
• 2006

For commercialization of molten carbonate fuel cell (MCFC), it has some problems to be overcome such as decrease of porosity and thickness of the anode under the operating condition (at $650^{\circ}C$ and working pressure of more than 2 $kg_f/cm^2$). Recently, Ni-Al alloy anode has been proposed to replace the conventional Ni-Cr anode as an alternative material to resist a creep and inhibit the sintering. The objective of this research is to sinter the green sheet of Ni-Al alloy anode during single cell pre-treatment process, which has several advantages like cost down and simplification of manufacturing process. However, the Ni-Al alloy anode prepared with a conventional pre-treatment process showed the phase separation of Ni-Al alloy and formation of micropore(${\leqq}0.4{\mu}m$), resulting in low creep resistance and high electrolyte re-distribution. In order to prevent the Ni-Al alloy anode from phase-separating, nitrogen gas was used in the process of pre-treatment. Introducing the nitrogen, the phase separation from Ni-Al alloy into nickel and alumina was minimized and increased creep resistance. However, there was some micropore formation on the surface of Ni-Al alloy anode during the cell operation due to creation of lithium aluminate. Addition of more amount of electrolyte into a cell, especially at cathode, made the cell performance stable for 2,000 hrs. Consequently, it was possible to make the Ni-Al alloy anode with good creep resistance by the modified in-situ sintering technique.

• Korean Journal of Plant Resources
• /
• v.26 no.1
• /
• pp.9-18
• /
• 2013

The aim of this study is to provide the basic data for yacon [Samallanthus sonchifolius (Poepp. & Endl.) H. Robinson] in dietary food. The nutritional compositons, such as protein, ash, carbohydrate, dietary fiber, vitamin and fructooligosaccharide, were analyzed for 4 yacon germplasm lines. Yacon has low calories with only 46~56 kcal/100 g. The contents of water, fat, ash, protein, carbohydrate and dietary fiber were ranged 85.9~86.8%, 0.1~0.2%, 0.2~0.3%, 0.5~0.7%, 12.2~13.1% and 1.05~1.14%, respectively. The iodine-starch test did not show any color or precipitation reaction, which indicates that yacon has no starch content. However, in the absence of starch, yacon is rich in fluctooligosaccharide, which is between 9.6~11.1%. Maltose is present in the larger amount, followed by sucrose, glucose, and fructose in terms of free sugars. The analysis of minerals revealed that yacon contains potassium in the larger amount of 141~176 mg/100 g F.W., followed by magnesium at 8.2~10.6 mg, calcium, and sodium representing the least present mineral. Yacon proved to have a total of 17 types of amino acids, which are between 404.0~581.8 mg per 100 g of yacon. Glutamic acid, the main sweetening component, is present in the large amount of 94.0~182.2 mg/100 g F.W., followed by aspartic acid, arginine, and alanine. The proportion of the essential amino acid was 24.8~33.6%. Results of analysis also showed that yacon contains 0.001~0.024 mg, 0.03~0.11 mg, 0.02~0.3 mg, 0.3~0.4 mg and 14.1~20.6 mg of ${\beta}$-carotene, thiamin, riboflavin, niacin, and ascorbic acid, respectively. It is also likely to be highly used as functional food material in the future because it is abundant in both fluctooligosaccharide and antioxidants which are important functional components.

• Journal of the Korean Magnetics Society
• /
• v.14 no.1
• /
• pp.38-44
• /
• 2004

The iron doped colossal magnetoresistance materials with La-Ba-Mn-O perovskites structure have been synthesized by chemical reaction of sol-gel methods. Their crystallographic and magnetic properties have been studied with x-ray diffraction, VSM, RBS, Mossbauer spectroscopy, and magnetoresistance measurements. The crystal structure of the La$\_$0.67/Ba$\_$0.33/Mn$\_$0.99/Fe$\_$0.01/ $O_3$ at room temperature was determined to be orthorhombic of Pnma. The lattice parameters a$\_$0/ and c$\_$0/ increased gradually, but b$\_$0/ deceased with increase of iron substitution. The magnetization and coercivity deceased, also the Curie temperature decreased from 360 K as x increased from 0.00 to 0.05. Magnetoresistence measurements were carried out, and the maximum MR ($\Delta$$\rho$/$\rho$(0)) was observed at 281 K, about 9.5 % in 10 kOe. The temperature of maximum resistance (R$\_$MAX/) decreased with increasing substitution of Fe ions and a semiconductor-metal transition temperature (T$\_$SC-M/) decreased too. This phenomena show that ferromagnetic transition temperature decreased by substituting Fe for Mn ions, it decreases double exchange interaction. This result accords with magnetic structure of neutron diffraction. Mossbauer spectra of La$\_$0.67/Ba$\_$0.33/Mn$\_$0.99/Fe$\_$0.01/ $O_3$were taken at various temperatures ranging from 15 to 350 K. With lowering temperature of the sample, two magnetic phases were increased and finally it showed the two sharp sextets of spectra at 15 K. The isomer shift at all temperature range is about 0.3 mm/s relative to Fe metal, which means that both Fe ions are Fe$\^$3+/ states.Fe$\^$3+/ states.

• Journal of Food Hygiene and Safety
• /
• v.20 no.4
• /
• pp.258-266
• /
• 2005

Licorice Extract and Erythritol, food additives used in korea, are widely used in foods as sweetener. Its application for use in food is regulated by the standard and specification for food additives but official analytical method far determination of these sweetener in food has not been established. Accordingly, we has been carried out to set up analytical method of the glycyrrhizic acid in several foods by the way of thin layer chromatography and high performance liquid chromatography glycyrrhizic acid is qualitative anaylsis technique consists of clean-up with a sep-pak $C_{18}$ cartridge, separation of the sweeteners by Silica gel 60 F254 TLC plate using 1-butanol:4Nammonia solution:ethanol (50:20:10) as mobile solvent. Also, the quantitative analysis for glycyrrhizic acid, was performed using Capcell prk $C_{18}$ column at wavelength 254nm and DW:Acetonitrile (62:38 (pH2.5)) as mobile phase. and we has been carried out to set up analytical method of the erythritol in several foods by the way of high performance liquid chromatography. erythritol is qualitative anaylsis technique consists of clean-up with a DW and hexane. The quantitative analysis for erythritol, was performed using Asahipak NH2P-50 column, Rl and DW:Acetonitrile (25:75) as mobile phase. The glycyrrhizic acid results determined as glycyrrhizic acid in 105 items were as follows; N.D$\∼$48.7ppm for 18 items in soy sauce, N.D$\∼$5.3ppm for 12 items in sauce, N.D$\∼$988.93ppm for 15 items in health food, N.D$\∼$180.7ppm for 26 items in beverages, N.D$\∼$2.6ppm for 8 items in alcoholic beverages repectively and ND for 63 items in the ethers. The erythritol results determined as erythritol in 52 items were as follows; N.D$\∼$155.6ppm for 13 items in gm, N.D$\∼$398.1ppm for 12 items in health foods repectively and ND for 45 items in the others.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.5 no.1
• /
• pp.59-69
• /
• 2000

Environmental factors and phytoplankton community have been bimonthly investigated in order to clarify the bioecological characteristics of coral habitats around Moonsom at the southern Cheju Island from September 1995 to July 1996. Annual mean temperature and annual mean salinity were $17.4^{\circ}C$ and 34.06 psu, respectively, showing lower temperature-higher salinity in winter and higher temperature-lower salinity in summer, which means such conditions are inadequate for coral reef formation. Nutrient concentrations represent that total nitrogen ranged from $0.07{\sim}10.08\;{\mu}M$, phosphate from $0.05{\sim}1.70\;{\mu}M$, and silicate from $3.08{\sim}21.86\;{\mu}M$. The N/P ratio showed the range of 9.59-10.60 with decreasing offshore-ward, which means the phytoplankton community could be limited by nitrogen sources. Annual mean euphotic depth was 32.0m (18.9m-48.6m) with difference according to season and reveals the close relationship with the depth of coral distribution. Chlorophyll a concentrations of phytoplankton ranged from $0.12{\sim}1.51\;{\mu}g\;L^{-1}$ and standing crops from $1.5{\times}10^3{\sim}7.0{\times}10^5\;cells\;L^{-1}$, showing higher at inshore than at offshore with a blooming in May. A total of 128 species of phytoplankton occurred in all stations, representing 99 spp. of diatoms, 26 spp. of dinoflagellates, 2 spp. of silicoflagellates and 1 sp. of blue-green algae. Diatoms are main taxa in all seasons except for occupying by dinoflagellates in summer. Among dominant species, fParalia sulcata (Ehrenberg) Cleve and Cylindrotheca closterium (Ehrenberg) Lewin & Reimann were predominant and are likely to be main food sources for coral community. Annual mean species diversity index (H') was 1.84, showing lower than around the coast line of Cheju Island.