• The KIPS Transactions:PartA
• /
• v.13A no.2 s.99
• /
• pp.147-156
• /
• 2006

Recently, streaming service accounts for large part of internet traffic and it is becoming the most popular service. Because of P2P's scalability, P2P-based streaming system is proposed. There are frequent leave and join of a node. To overcome the group dynamics, Multiple Multicast Trees Methods were suggested. However, since they did not consider discrepancy in peers' capacity, it may cause the trees to be long and unstable. So we suggest Resilient Capacity-Aware Multicast Tree construction scheme (R-CAT) that promotes superior peer to upper position in the tree and construct more stable and short multicast trees. By simulation we can show that R-CAT cost more overhead packets for tree joining process, but it reduce the end-to-end delay of the resulting tree and the number of packets lost during the node joining and leaving processes much more than SplitStream.

• Journal of Conservation Science
• /
• v.35 no.3
• /
• pp.245-251
• /
• 2019

In this paper, conservation treatment processes for the wooden furniture in the Presidential Archives are introduced. Conservation treatment strategies for modern wooden cultural heritage have been increasingly studied. The current study uses materials similar to those used by the existing conservation treatment method. Material analysis showed that the chair(Lee136-2) and desk(Yun37) in the Presidential Archives are made of Dipterocarpaceae, and both are coated with two layers of varnishing. FT-IR analysis showed that the varnish has a similar spectrum to that of a nitrocellulose-based lacquer(Lee136-2) and top coat(Yun37) and confirmed that a synthetic material was used. Pollutants had adhered to the surface of the wooden furniture and it was also in structurally unstable condition because of cracks and damage to the varnish and wood. Therefore, a conservation treatment was carried out to restore the damaged areas to their original appearance using similar kinds of materials, based on data obtained by materials analysis.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.3
• /
• pp.367-375
• /
• 1986

On the hypothesis that the unstable intermediates yield by the pre-reaction of auxiliary fuel become an initiator or an explosive center which promotes the chain reaction of main fuel, various organic compounds below $C_{10}$ are injected as an auxiliary fuel prior to main injection. In the previous papers, the effects of the auxiliary fuel additions on the ignition delay period, the stability of flame, the NO concentrations in their exhaust gases have been investigated. In the present paper, to confirm where the most suitable location of lean pre-mixture for the combustion of main fuel is, and how the lean pre-mixture is contacted with main fuel, the effects of the injection timing of auxiliary fuel and the turbulence on combustion processes are investigated. Moreover, from the schlieren and color photographs of flame in the combution field, it could be found that the ignition nuclei are formed in a wider region of main spray, and that these ignition nuclei promote the development of flame, which results in the reduction of flaming duration.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.6
• /
• pp.447-456
• /
• 2007

Suspended particles behavior when they go through a vertical riser with heat transfer is of significant concern to system designers and operators in pneumatic transport, various processes such as in chemical, pharmaceutical and food industries. When it comes with the energy system, that knowledge is critical to the reliable design practices of related equipment as heat exchangers, especially in the phase of system scale-up. Without haying a good understanding of the related physics, many scale-up practices based on their pilot plant experience suffer from unexpected behaviors and problems of unstable fluidization typically associated with excessive pressure drop, pressure fluctuation and even unsuccessful particle circulation. In the present study, we try to explain the observed phenomena with related physics, which may help understanding of our unanswered experiences and to provide the designers with more reliable resources for their work. We selected hot exhaust gas with solid particle that goes through a heat exchanger riser as our model to be considered. The effect of temperature change on the gas velocity, thermodynamic properties, and eventually on the particles motion behavior is reviewed along with some heat transfer analyses. The present study presents an optimal riser length at full scale under given conditions, and also defines the theoretical limiting length of the riser. The field data from the numerical analysis was validated against our experimental results.

• Korean Institute of Interior Design Journal
• /
• v.15 no.6 s.59
• /
• pp.68-76
• /
• 2006

Founding himself on 'The Principle of Self-making' that is the instrument of 'the natural construction' and accomplishing the various interdisciplinary researches, Frei Otto could explicate the fundamental structure of life that is able to make visible the self-making processes in the nature, the technique and the architecture. It is the flexible pneumatic construction that is grounded on the fibrous organization. This was a milestone not only for him who wanted to put the idea of the new architectural form into practice, but also for the contemporary architecture that faces on the style-pluralistic disorientedness. The architectural form of the natural construction includes in itself three constitutional sub-ideas. One of them is 'the adaptable architecture', which is inclined to the architecture similar to the organization of human body, and the other 'the light architecture' that is in the pursuit of the optimal form through the minimal material. The last one is 'the ecological architecture' that aims to realize the optimal dwelling environment based on the effective energy consumption by accumulating knowledges of the always fluid and unstable nature. With these architectural ideas Frei Otto could develop a new architectural form language 'the light architecture of the natural construction'. This study is purposed to explain the various experiments that were made by his team and the basic principles of the structural dynamics of 'the architecture of the natural construction' and then to analyze the structures that were built on the ground of those principles.

• Korean Journal of Social Welfare Studies
• /
• v.41 no.1
• /
• pp.203-226
• /
• 2010

Using the Korean Welfare Panel Study, this study examines the labor-market activities of uninsured persons and discusses policy implications for reforming the National Pension Scheme in Korea. First, despite the short observation period, the data show that pension status is not a static state and can be better understood in terms of dynamic processes. Second, in addition to frequent changes in income-earning activities, complex criteria for pension coverage cause substantial transitions in pension status. Third, a portion of uninsured persons involve in income-earning activities but they tend to face poor working conditions as well as unstable employment. Overall, this study suggests that building solid foundations for developing a financially sustainable and reliable social protection system is more important than rapid increase in pension coverage.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.672-674
• /
• 2017

The addition of swirl is a common technique used in premixed combustors in order to gain stability of the combustion with the improvements in mixing characteristics. recent experimental studies have observed that the addition of swirl oxidizer flow can effectively reduce the combustion instability in hybrid rocket. Investigation was continued to analyze the effect of the swirl on the internal flow of hybrid rocket engine main combustion chamber. The flow influenced by wall blowing as a representation of fuel evaporation interacts with swirling flow. Swirl angle increases, the amplitude of the combustion pressure decrease as the unstable combustion processes. These results suggest that the oxidizer swirling flow by the swirl angle causes the change of the turbulent flow characteristics inside the combustion chamber and suppresses the factors causing the combustion instability.

• Korean Journal of Environmental Biology
• /
• v.35 no.3
• /
• pp.380-388
• /
• 2017

Factors affecting spatial distribution of halophytes were analyzed in June 2012 at the Goraebul coastal dunes. In the Goraebul sand dune, distribution of halophytes was divided into three groups. The first group belonging to Elymus mollis, Carex kobomugi, Calystegia soldanella, Ixeris repens and Glehnia littoralis was distributed in the ridge of primary sand dune and dune slack. The second group belonging to Lathyrus japonicus and Zoysia macrostachya was distributed in the dune slack. The third group belonging to Pinus thunbergii, Vitex rotundifolia and Linaria japonicus was distributed in the pine forest of the secondary sand dune. E. mollis, C. kobomugi, C. soldanella, I. repens and G. littoralis was distributed in relatively unstable habitat of sand dunes due to the large amount of sand movement. V. rotundifolia was distributed in a relatively stable habitat. Factors that have the greatest influence on distribution of halophytes in the Goraebul sand dunes are distance from the seashore, topography, and the pine forest. The Goraebul sand dune is a relatively well-preserved area with minimal human intervention. Therefore, different distribution of physico-chemical factors by natural processes is essential to spatial distribution of halophytes than other sand dunes in Korea. Significant natural processes in the Goraebul sand dunes were advance and retreat of coastlines from waves, erosion and sedimentation of sand due to wind and waves, and dispersal of seawater.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.s02
• /
• pp.96-114
• /
• 1989

There are several meterorolgical stresses in the winter cereal crops. Among these stresses, cold injury is one of the most important stresses for wheat and barley production in Korea. The reduction in grain yield of the wheat and barley due to cold injury has occurred almost every year in Korea. The objective of the study was to get the basic information in relation to the cold injury and to detect the method minimizing the damage of cold injury. When the air temperature was the ranges of -13$^{\circ}C$ to -15$^{\circ}C$, the soil temperature at the crown part of the plant was very stable, whereas in the ranges of -2$^{\circ}C$ to -3$^{\circ}C$ the soil surface temperature was more unstable and cold than air and subterranean temperatures. The different parts of the plant in wheat and barley possess the different levels of cold hardiness. In comparison to the cold hardiness of plant parts, the leaf and crown are the less sensitive to cold injury than root and vascular transitional zone. The type and extent of stress is determined by the redistribution pattern of water during freezing. These types from freezing processes were three types: a) Equilibrium freezing pattern b) Non -equilibrium freezing pattern, c) Non-equilibrium freezing pattern typical of tender tissues. Cold hardiness in wheat plants were more harder than barley plants at vegitative stage, but inverted at the reproductive stage. Injuries by low temperature during the seasons of barley cultivation in Korea were occured mainly in four stage; in the first and third stage, frost injury occurs, the second stage, freezing injury, and the fourth stage, chilling injury.

• Journal of the Korean Vacuum Society
• /
• v.16 no.5
• /
• pp.348-352
• /
• 2007

In submicron processes, the feature size of ULSI devices is critical, and it is necessary both to reduce the RC time delay for device speed performance and to enable higher current densities without electromigration. In case of contacts between semiconductor and metal in semiconductor devices, it may be very unstable during the thermal annealing process. To prevent these problems, we deposited tungsten carbon nitride (W-C-N) ternary compound thin film as a diffusion barrier for preventing the interdiffusion between metal and semiconductor. The thickness of W-C-N thin film is $1,000{\AA}$ and the process pressure is 7mTorr during the deposition of thin film. In this work we studied the interface effects W-C-N diffusion barrier using the XRD and 4-point probe.