• 대한기계학회논문집
• /
• 제14권1호
• /
• pp.172-178
• /
• 1990

본 연구에서는 스터링기관의 예비설계에 편리하게 적용될 수 있는 경제적이며 타당한 해석방법을 확립하기 위하여, Urieli등에 의하여 정립된 이상적인 단열모델에 대하여 해석적 근사해를 구하고자 한다.이미 발표된 연구에서는 근사해를 얻기 위 해 피스턴운동을 가장 간단한 톱날파로 가정한 바 있으나 실제의 정현파형 등과는 현 저한 차이가 있으므로 이를 개선하여 크랭크각도에 대한 임의의 구간선형함수(piecew- ise linear function)로 취급한다. 또한, 해석의 결과로서 결정되는 기관내의 압력 및 각 실린더내의 질량 또는 온도 등 열역학적 변수로부터 기관성능평가를 위한 열 및 일의 계산 과정을 포함한다.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2002년도 학술대회지
• /
• pp.419-422
• /
• 2002

현대 건설산업의 특징은 전문화, 복잡화, 대형화 등으로 다각적으로 변하고 있다. 따라서, 전통적인 공사비 관리체계로는 증가하는 건설공사의 불확실성을 감당할 수 없는 것이 현실이다. 이로 인하여 수많은 공사에서 공사비 증가현상이 발생하면서 건설사업의 성공적인 수행에 영향을 주고 있다. 따라서, 공사비 증가 현상을 방지하고, 효과적인 공사비 관리를 위해서는 정확한 견적을 통하여 관리 목표를 설정하고, 목표를 달성하기 위한 활동들이 필요하다. 본 연구에서는 효율적 공사비 관리를 위하여 기존에 사용된 공사비 모형을 분석하고, 단지조성 공사의 공사비 모형 구축에 필요한 표준 분석체계를 구축하여, 실제 단지조성 공사 사례 분석을 통하여 계획 및 설계단계에서 이용할 수 있는 공사비 모형을 제시하고자 한다.

• 대한수학회논문집
• /
• 제33권3호
• /
• pp.1025-1037
• /
• 2018

We consider an ill-posed problem for the heat equation $u_{xx}=u_t$ in the quarter plane {x > 0, t > 0}. We propose a new method to compute the heat flux $h(t)=u_x(1,t)$ from the boundary temperature g(t) = u(1, t). The operator $g{\mapsto}h=Hg$ is unbounded in $L^2({\mathbb{R}})$, so we approximate h(t) by $h_{\delta}(t)=u_x(1+{\delta},\;t)$, ${\delta}{\rightarrow}0$. When noise is present, the data is $g_{\epsilon}$ leading to a corresponding heat $h_{{\delta},{\epsilon}}$. We obtain an estimate of the error ${\parallel}h-h_{{\delta},{\epsilon}}{\parallel}$, as well as the error when $h_{{\delta},{\epsilon}}$ is approximated by the trapezoidal rule. With an a priori choice rule ${\delta}={\delta}({\epsilon})$ and ${\tau}={\tau}({\epsilon})$, the step size of the trapezoidal rule, the main theorem gives the error of the heat flux as a function of noise level ${\epsilon}$. Numerical examples show that the proposed method is effective and stable.

• Structural Engineering and Mechanics
• /
• 제21권5호
• /
• pp.539-551
• /
• 2005

Finite elements based on isoparametric formulation are known to suffer spurious stiffness properties and corresponding stress oscillations, even when care is taken to ensure that completeness and continuity requirements are enforced. This occurs frequently when the physics of the problem requires multiple strain components to be defined. This kind of error, commonly known as locking, can be circumvented by using reduced integration techniques to evaluate the element stiffness matrices instead of the full integration that is mathematically prescribed. However, the reduced integration technique itself can have a further drawback - rank deficiency, which physically implies that spurious energy modes (e.g., hourglass modes) are introduced because of reduced integration. Such instability in an existing stiffness matrix is generally detected by means of an eigenvalue test. In this paper we show that a knowledge of the dimension of the solution space spanned by the column vectors of the strain-displacement matrix can be used to identify the instabilities arising in an element due to reduced/selective integration techniques a priori, without having to complete the element stiffness matrix formulation and then test for zero eigenvalues.

• 대한의용생체공학회:의공학회지
• /
• 제29권5호
• /
• pp.355-363
• /
• 2008

In order to extract only the alpha activity related signals from EEG recordings, we have applied Constrained Independent Component Analysis (cICA), a new extension of ICA in which some a priori knowledge of the alpha activity is utilized to extract only desired components. Its extraction (or filtering) performance has been compared to that of the conventional band-pass filtering via the scalp alpha power maps and cortical source maps of the alpha activity. Our results demonstrate that the alpha power maps and cortical source maps from the cICA-extracted alpha signals reveal more focalized alpha generating regions of the brain than those from the band-pass filtered alpha EEG signals. Furthermore they match more closely the activated regions of the brain mapped using fMRI, validating our results. We believe that the cICA-based filtering approach of EEG signals is a more effective means of extracting a specific brain activity reflected in EEG signals that will result in more accurate source localization or imaging maps.

• The Journal of the Acoustical Society of Korea
• /
• 제24권3E호
• /
• pp.87-89
• /
• 2005

The acoustical sources of intake and exhaust systems in fluid machines are often characterized by the source impedance and strength using linear frequency-domain modeling. In the case of the sources which are nonlinear and time-variant, however, the source parameters were sometimes incorrectly obtained. In this paper, the source model and direct measurement technique are modified in order to evaluate the effect due to nonlinear and periodically time-varying source character as well as the linear property of the reflectivity of in-duct fluid machine source. With a priori known kinematical information of the source, the types of nonlinear time-variant terms can be presumed by a simple physical model, in which there is practically no restriction on the form of the model. The concept of source impedance can be extendable by introducing the linear frequency response function for each nonlinear or time-variant input. Extending the conventional method and adapting the reverse MISO technique, it is possible to develop a direct method that can deal with the nonlinear time-variant source parameters. The proposed direct method has a novel feature that there is no restriction on the probability or spectral natures of the excited sound pressure data. The present method is verified by the simulated measurements for simplified fluid machines. It is thought that the proposed method would be useful in predicting the insertion loss or the radiated sound level from intake or exhaust systems.

• 대한의용생체공학회:의공학회지
• /
• 제17권1호
• /
• pp.109-120
• /
• 1996

Cardiac function is evaluated quantitatively using angiographic images via the analysis of the shape change or the heart wall boundaries. To kin with, boundary defection or ESLV(End Systolic Lert Ventricular) and EDLV(End Diastolic Left Ventricular) is essential for the quantitative analysis of cardiac function. The boundary detection methods proposed in the past were almost semi-automatic. Intervention by a knowledgeable human operator was still required Of con, manual tracing of the boundaries is currently used for subsequent analysis and diagnosis. This method would not cut excessive time, labor, and subjectivity associated with manual intervention by a human operator. EDLV images have noncontiguous and ambiguous edge signal on some boundary regions. In this paper, we propose a new method for automated detection of boundaries in noncontiguous and ambiguous EDLV images. The boundary detection scheme which based on a priori knowledge information is divided into two steps. The first step is to detect the candidate edge points of EDLV using ESLV boundaries. The second step is to correct detected boundaries of EDLV using the LV shape. We developed the algorithm of modifying EDLV boundaries defined adaptive modifier. We experimented the method proposed in this paper and compared our proposed method with the manual method in detecting boundaries of EDLV. In the areas within estimated boundaries of EDLV, the percentage of error was about 1.4%. We verified the useflilness and obtained the satisfying results througll the experiments of the proposed method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2371-2373
• /
• 2000

This paper presents a new vector control scheme for induction motor. An exact knowledge of the rotor flux position is essential for a high-performance vector control. The position of the rotor flux is measured in the direct scheme and estimated in the indirect schemes. Since the estimation of the flux position requires a priori knowledge of the induction motor parameters, the indirect schemes are machine parameter dependent. The rotor and stator resistance among the parameters change with temperature. Variations in the parameters of induction machine cause deterioration of both the steady state and dynamic operation of the induction motor drive. Several methods have presented to minimize the consequences of parameter sensitivity in indirect scheme. In this paper, new estimation scheme of rotor flux position is presented to eliminate sensitivity due to variation in the resistance. The simulation is executed to verify the proposed vector control performance and to compare its performance with that of indirect vector control.

• 제어로봇시스템학회논문지
• /
• 제12권12호
• /
• pp.1163-1168
• /
• 2006

Manufacturing technology for the production of high value-added fine chemical products is emphasized and getting more attention as the diversified interests of customers and the demand of high quality products are getting bigger and bigger everyday. Thus, the development of advanced batch processes, which is the preferred and most appropriate way of producing these types of products, and the related technologies are becoming more important. Therefore, high-precision batch distillation is one of the important elements in the successful manufacturing of fine chemicals, and the importance of the process operation strategy with quality assurance cannot be overemphasized. Accordingly, proposing a process structure explanation and operation strategy of such processes including batch processes and batch distillation would be of great value. We investigate optimal operation strategy and production planning of multi-purpose plants consisting of batch processes and batch distillation for the manufacturing of fine chemical products. For the short-term scheduling of a sequential multi-purpose batch plant consisting of batch distillation under MPC and UIS policy, we proposed a MILP model based on a priori time slot allocation. Also, we consider that the waste product of being produced on batch distillation is recycled to the batch distillation unit for the saving of raw materials. The developed methodology will be especially useful for the design and optimal operations of multi-purpose and multiproduct plants that is suitable for fine chemical production.

• Journal of Community Nutrition
• /
• 제2권2호
• /
• pp.135-140
• /
• 2000

The objectives of this study were to determine whether older Americans would provide valid energy intake information using a 24-hr recall method and to determine which characteristics were predictive of under-report of energy intake. We conducted 24-hour recalls on 83 male and 105 female community-dwelling older adults(66-87y) in the USA to assess energy(EI) and nutrient intakes. Basal metabolic rate(BMR) was calculated from age-and gender-specific equations of Schofield. Under-reporting was defined a priori as EI : BMR<0.9. Subjects volunteered demographic information, underwent depression and cognition exams, and completed a Level II Nutrition Risk Screen. Differences between under- and adequate-reporters were assessed using t-tests for characteristics and macro-nutrient profile. Stepwise regression analyses were used to predict under-reporting status. Under-reporting of EI occurred in 34% of the sample. Neither geriatric depression scale(GDS) score, nor self-reported weight loss were related to under-reporting. On average, under-reporters had higher body mass indices. The most significant variables for the main effect to predict the ratio of energy intake to estimated basal metabolic rate(EI : BMRest) were BMI and age. Using a standard cut-off of 76% of the recommended dietary allowances for Americans, under-reporters were consistently more likely to be classified as having inadequate nutrient, as well as energy, intakes. (J Community 2(2) 135∼140, 2000)