Flowable composite resin has lower filler content, increased flow, and lower modules of elasticity. It is suggested that flowable composite resin can be bonded to the tooth structure intimately and absorb or dissipate the stress. Therefore, it may be advantageous to use flowable composite resin for the base material of class II restoration and for the class V restoraton. The purpose of this study was to evaluate the microleakage and shear bond strength of four flowable composite resins (Aeliteflo, Flow-It, Revolution, Ultraseal XT Plus) compared to Z100 using Scotchbond Multi Purpose dentin bonding system. To evaluate the microleakage, notch-shaped class V cavities were prepared on buccal and lingual surfaces of 80 extracted human premolars and molars on cementum margin. The teeth were randomly divided into non-thermocycling group (group 1) and thermocycling group (group 2) of 40 teeth each. The experimental teeth of each group were randomly divided onto five subgroups of eight samples (sixteen surfaces). The Scotchbond Multi-Purpose and composite resin were applied for each group following the manufacturer's instructions. the teeth of group 2 were thermocycled five hundred times between 5$^{\circ}C$ and 55$^{\circ}C$. The teeth of group 2 were placed in 2% methylene blue dye for 24 hours, then rinsed with tab water. The specimens were embedded in clear resin, and sectioned longitudinally with a diamond saw. The dye penetration on each of the specimen were observed with a stereomicioscope at $\times$20 magnification. To evaluate the shear bond strength, 60 teeth were divided into five groups of twelve teeth each. The experimental teeth were ground horizontally below the dentinoenamel junction, so that no enamel remained. After applying Scotchbond Multi-Purpose on the dentin surface, composite resin was applied in the shape of cylinder. The cylinder was 4mm in diameter and 2mm in thickness. Shear bond strength was measured using Instron with a cross-head speed of 0.5mm/min. After shear bond strength measurement, mode of failure was evaluated with a stereomicroscope at $\times$30 magnification. All data were statistically analyzed by One Way ANOVA and Student-Newman-Keuls method. The correlation between microleakage and shear bond strength was analyzed by linear regression. The results of this study were as follows ; 1. In non-thermocycling group, the leakage value of Z100 was significantly lower than those of flowable composite resins at the enamel and dentin margin, margin, except that Revolution showed the lower leakage value than that of Z100 at the dentin margin (p<0.05). 2. In thermocycling group, the leakage values of Z100 and Ultraseal XT Plus were lower than those of other subgroup at the enamel and dentin margin, except that Flow-It showed the lower leakage value than that of Ultraseal XT Plus at the dentin margin (p<0.05). 3. The leakage value of Z100 and Ultraseal XT Plus in thermocycling group were not higher than that in non-thermocycling group at the enamel margin. The leakage value of Z100 in thermocycling group was not higher than that in non-thermocycling group at the dentin margin (p<0.05). 4. As for the shear bond strength measurement, there were no statistically significant differences among groups (p<0.05). The shear bond strengths given in descending order were as follows: Z100(16.81$\pm$2.98 MPa), Flow-It(14.8$\pm$4.43 MPa), Aeliteflo(14.34$\pm$3.69 MPa), Revolution(13.46$\pm$4.23 MPa), Ultraseal XT Plus(12.83$\pm$3.16 MPa). 5. Failure modes of all specimens were adhesive failures. 6. There was no correlation between microleakage and shear bond strength.
본 연구에서는 최적 pRBFNNs 패턴분류기 기반 2차원 영상과 ASM 알고리즘을 이용한 얼굴인식 시스템을 설계하고자 한다. 기존의 2차원 영상 기반 얼굴 인식 기법들은 인식하고자 하는 객체의 영상내의 위치, 크기 및 배경의 존재 유무에 따라 인식률이 영향을 받는 단점이 있으며, 본 연구에서는 이를 보완하기 위하여 관심 영역 내에서의 얼굴 영역 추출 및 특징 추출기법을 이용한 얼굴인식 방법을 소개한다. 본 연구에서는 CCD 카메라를 이용하여 영상을 획득하고 히스토그램 평활화를 이용하여 조명으로 왜곡된 영상정보를 개선한다. AdaBoost 알고리즘을 이용하여 얼굴영역을 검출하고 ASM을 통하여 얼굴 윤곽선 및 형상을 추출하여 개인 프로필을 구성한 후 PCA 알고리즘을 사용하여 고차원 얼굴데이터의 차원을 축소한다. 그리고 인식 모듈로서 pRBFNNs 패턴분류기를 제안한다. 제안된 다항식 기반 RBFNNs은 조건부, 결론부, 추론부 세 가지의 기능적 모듈로 구성되어 있고 조건부는 퍼지 클러스터링을 사용하여 입력 공간을 분할하고, 결론부는 분할된 로컬 영역을 다항식 함수로 표현한다. 또한 차분진화 알고리즘을 이용하여 제안된 분류기의 파라미터, 즉, 학습률, 모멘텀 계수, 퍼지 클러스터링의 퍼지화 계수를 최적화한다. 제안된 다항식 기반 RBFNNs는 얼굴 인식을 위한 패턴분류기로서 직접 CCD 카메라로부터 입력받은 데이터를 영상 보정, 얼굴 검출 및 특징 추출 등과 같은 데이터 전 처리 과정을 포함하여 고차원 데이터로 이루어진 얼굴 영상에 대한 인식 성능을 확인한다.
Objectives : This study was conducted to determine the appropriate sampling time of the salivary stress markers, chromogranin A (CgA) and cortisol as objective indices of job stress assessment in adult females. Methods : The subjects were 20${\sim}$39-year-old women (13 office workers, 11 sales-service workers, and 11 college students) who were eligible for the study and free of acute and chronic medical conditions. Salivary CgA and cortisol levels were determined by enzyme-linked immunosorbent assay (ELISA). Saliva samples were collected (2 $m{\ell}$ each) at 7:00, 8:00, 10:30, 12:00, 17:30, and 22:30 on a typical day. Salivary CgA and cortisol levels, according to sampling time, were compared among the three groups using general linear model. The full version of the Korean Occupational Stress Scale (KOSS), which includes socioeconomic characteristics, health behavior, workrelated characteristics, and BMI, was used to access the subjects' job stress. Multiple regression analysis of the job stressors identified by the KOSS was performed on salivary CgA and cortisol levels. Results : The salivary CgA level peaked at 7:00 (time of awakening), then decreased and were maintained at a low level throughout the day, and increased slightly at 17:30. The salivary cortisol level increased steeply within the 1st hour after awakening, followed by a gradual decrease by 12:00, and was then maintained at a low level throughout the day. The salivary cortisol levels of subjects who worked ${\leq}$5 days per week and graduated from the university were significantly lower at 8:00 (p=0.006). The salivary cortisol levels of non-smokers were significantly lower at 7:00 p=0.040) and 8:00 (p=0.003) compared to smokers. There were no significant differences in salivary CgA and cortisol levels at 10:30 and 12:00 in general characteristics. The regression coefficients on salivary CgA level were significant with interpersonal conflict at 17:30 and job insecurity at 22:30. Regression coefficients on salivary cortisol level were significant with organizational system and total job stressors at 17:30. Conclusions : We suggest that the appropriate sampling times for the salivary stress markers, CgA and cortisol, are at 7:00 (time of awakening), 8:00 (1 hour after awakening), 17:30 (early evening), and 22:30 (before sleep).
타이밍벨트는 동력전달 요소로서 V벨트와 기어의 장점을 살린 톱니붙이 전동 벨트로서 미끄러지지 않고 소음도 적어 기구에서 회전축이나 직선 운동에서 동력을 전달할 때 동력 전달 장치로 사용되고 있다. 기어처럼 등간격의 홈을 가진 벨트 풀리와 홈에 정확히 맞물리도록 동일한 간격의 홈을 가진 타이밍 벨트를 통해 회전을 정확하게 전달할 수가 있다. 특히 출력축에 타이밍벨트가 사용된 메커니즘에서 타이밍벨트의 강성을 포함한 동적 특성이 시스템 전달 특성을 결정하게 되므로 그 중요성이 커진다. 본 논문에서는 제한된 범위의 움직임을 갖는 타이밍 벨트에 적용하여 강성을 증가시킬 수 있는 강성 강화 벨트를 제안하였다. 강성 강화 벨트의 동특성을 연구하기 위하여 강성 강화 벨트에 대한 운동방정식을 수립하고, 강성 강화 벨트에 대한 시뮬레이션 모델을 만들어 분석을 수행하였다. 운동 방정식과 시뮬레이션 모델의 분석 결과를 확인하기 위하여 강성 강화 벨트를 사용한 1축 회전 실험 장치를 제작하고 실험을 수행하였다. 운동 방정식, 시뮬레이션 모델, 실험을 통하여 제안한 강성 강화 벨트를 적용하면 타이밍벨트의 강성과 동특성을 개선할 수 있음을 확인하였다.
A.M. Abd-Alla;Esraa N. Thabet;S.M.M.El-Kabeir;H. A. Hosham;Shimaa E. Waheed
Advances in nano research
/
제16권4호
/
pp.325-340
/
2024
There are several novel uses for dispersing many nanoparticles into a conventional fluid, including dynamic sealing, damping, heat dissipation, microfluidics, and more. Therefore, melting heat and mass transfer characteristics of a 3-D MHD Hybrid Nanofluid flow over a rotating disc with presenting dufour and soret effects are assessed numerically in this study. In this instance, we investigated both ferric sulfate and molybdenum disulfide as nanoparticles suspended within base fluid water. The governing partial differential equations are transformed into linked higher-order non-linear ordinary differential equations by the local similarity transformation. The collection of these deduced equations is then resolved using a Chebyshev spectral collocation-based algorithm built into the Mathematica software. To demonstrate how different instances of hybrid/ nanofluid are impacted by changes in temperature, velocity, and the distribution of nanoparticle concentration, examples of graphical and numerical data are given. For many values of the material parameters, the computational findings are shown. Simulations conducted for different physical parameters in the model show that adding hybrid nanoparticle to the fluid mixture increases heat transfer in comparison to simple nanofluids. It has been identified that hybrid nanoparticles, as opposed to single-type nanoparticles, need to be taken into consideration to create an effective thermal system. Furthermore, porosity lowers the velocities of simple and hybrid nanofluids in both cases. Additionally, results show that the drag force from skin friction causes the nanoparticle fluid to travel more slowly than the hybrid nanoparticle fluid. The findings also demonstrate that suction factors like magnetic and porosity parameters, as well as nanoparticles, raise the skin friction coefficient. Furthermore, It indicates that the outcomes from different flow scenarios correlate and are in strong agreement with the findings from the published literature. Bar chart depictions are altered by changes in flow rates. Moreover, the results confirm doctors' views to prescribe hybrid nanoparticle and particle nanoparticle contents for achalasia patients and also those who suffer from esophageal stricture and tumors. The results of this study can also be applied to the energy generated by the melting disc surface, which has a variety of industrial uses. These include, but are not limited to, the preparation of semiconductor materials, the solidification of magma, the melting of permafrost, and the refreezing of frozen land.
The role of radiology department has been greatly increased in the past few years as the technology in the medical imaging devices improved and the introduction of PACS (Picture Archiving and Communications System) to the conventional film-based diagnostic structure is a truly remarkable factor to the medical history. In addition, the value of using digital information in medical imaging is highly expected to grow as the technology over the computer and the network improves. However, the current medical practice, using PACS is somewhat limited compared to the film-based conventional one due to a poor image quality. The image quality is the most important and inevitable factor in the PACS environment and it is one of the most necessary steps to more wide practice of digital imaging. The existing image quality control tools are limited in controlling images produced from the medical modalities, because they cannot display the real image changing status. Thus, the image quality is distorted and the ability to diagnosis becomes hindered compared to the one of the film-based practice. In addition, the workflow of the radiologist greatly increases; as every doctor has to perform his or her own image quality control every time they view images produced from the medical modalities. To resolve these kinds of problems and enhance current medical practice under the PACS environment, we have developed a program to display a better image quality by using the ROI optical density of the existing gray level values. When the LUT is used properly, small detailed regions, which cannot be seen by using the existing image quality controls are easily displayed and thus, greatly improves digital medical practice. The purpose of this study is to provide an easier medical practice to physicians, by applying the technology of converting the H-D curves of the analog film screen to the digital imaging technology and to preset image quality control values to each exposed body part, modality and group of physicians for a better and easier medical practice. We have asked to 5 well known professional physicians to compare image quality of the same set of exam by using the two different methods: existing image quality control and the LUT technology. As the result, the LUT technology was enormously favored over the existing image quality control method. All the physicians have pointed out the far more superiority of the LUT over the existing image quality control method and highly praised its ability to display small detailed regions, which cannot be displayed by existing image quality control tools. Two physicians expressed the necessity of presetting the LUT values for each exposed body part. Overall, the LUT technology yielded a great interest among the physicians and highly praised for its ability to overcome currently embedded problems of PACS. We strongly believe that the LUT technology can enhance the current medical practice and open a new beginning in the future medical imaging.
본 연구는 수간재적과 상관관계가 높은 흉고직경과 수고를 독립변수로 하여 우리나라 일본잎갈나무의 수간재적 추정식을 개발하고자 하였다. 전국의 분포하고 있는 일본잎갈나무를 총 2,840본의 표준목을 벌채하여 수간고별 직경과 수간석해 자료를 수집하여 생장특성을 조사하였다. 6개의 수간재적모델의 적합도 검정을 위하여 적합도지수, 편차, 평균절대편차, 변이계수를 이용하여 모델의 적합성을 판단하였다. 최종 선정된 모델은 흉고직경만을 이용한 Model 1(V=a+bDBH2), 흉고직경과 수고를 이용한 Model 4(V=a+bDBH2H)가 최적의 모델로 선정되었다. 비선형회귀분석을 통한 모델의 절편과 기울기계수인 a, b는 0.05수준에서 통계적으로 유의한 값을 보였다. 적합도지수는 94%~99%로 나타났고, 편차는 두 모델이 0에 근접하였으며, 평균절대편차는 0.01~0.05, 변이계수는 5.97~14.43으로 높은 적합도를 보였다. 본 연구에서 제시된 수간재적모델을 이용하여 현장에서 흉고직경 또는 흉고직경과 수고를 측정한 후 바로 재적을 추정할 수 있으며, 산림경영에 필요한 기초 정보를 제공해 줄 것이다.
열적으로 불안정한 강착원반의 비선형 유체역학적 모형에 기초하여 블랙홀 마이크로케이사의 광폭발 한계 순환주기에 대한 원반 질량의 시간적 진화 모형을 계산하였다. 블랙홀의 질량, 원반 크기 및 질량 유입률과 같은 물리적인 매개변수들은 블랙홀 X선 신성의 원형인 A0620-00에서 관측된 역사적인 1975 광폭발을 재현하도록 선택되었다. 중심부에서 원반으로 쪼여지는 조사(照射)의 시간에 따른 효과는 직접 조사와 원반위의 뜨거운 강착 흐름으로부터 굴절되어 원반에 쪼여지는 간접조사의 두 가지 방법이 고려되었다. 우리의 강착원반 열적 불안정성 모형은 광폭발의 순환과정 전반에 걸쳐 X-선 변광체들에서 관측된 광도의 전형적인 복사 광도를 설명할 수 있다. 강착원반의 최대질량 ${\sim}4.03{\times}10^{24}g$은 광폭발의 점화 때에 얻어지며, 최소질량 ${\sim}8.54{\times}10^{23}g$은 차가운 쇠퇴기와 정지기(靜止期) 때에 이루어진다. 원반의 질량은 광폭발 한계 순환주기에 걸쳐 약 5배 정도 변한다.
지각구조 연구에서 해저면 지진계(OBS)의 위치정보는 OBS-에어건 탄성파 탐사에 있어서 매우 중요한 변수들중의 하나이다. 이 변수의 정확도을 향상시키기 위해 우리는 이용 가능한 음향 트랜스폰더에 의한 거리 정보와 함께 에어건 발파 자료와 수심 자료를 이용하여 OBS 위치를 결정하는 새로운 방법을 개발하였다. 음향 트랜스폰더로 얻은 거리 자료가 3 지점 미만의 것일 때에는 에어건 발파에 의해 발생하여 OBS에 기록된 수중 직접파의 주시가 OBS 위치 결정에 매우 중요한 정보로 활용된다. 그 새로운 방법은 두 단계로 이루어져 있다. 첫 번째 단계에서는 광역 검색이 이루어지는데 이는 수심 격자상에서 에어건 발파로부터 나온 수중 직접파의 관측 주시와 트랜스폰더 시스템을 사용하여 얻은 음향 거리로 설명할 수 있는 가장 가까운 노드를 찾는 것이다. 만약 OBS가 위치한 해저면 지형이 매우 험하다면 정밀한 2D 수심 데이터의 사용이 가장 중요하다. 국부적으로 수렴하는 최소값에 빠지지 않기 위해 첫 번째 단계에서 얻은 노드의 위치는 두 번째 단계의 초기값으로 사용된다. 두 번째 단계에서는 비선형 역산법이 수행된다. 만일 OBS의 내부 시계가 큰 편차를 보인다면 이 방법을 사용한 최종 OBS 위치와 함께 내부 시계에 대한 보정 또한 이루어져야 한다. 우리는 여기에서 OBS 위치 결정에 사용한 각 측정값의 영향과 오차에 대해서도 토론하고자 한다.
본 연구의 목적은 하천의 조도계수와 유량의 불확실성을 고려하여, 부정류 흐름에서 홍수위 해석에 미치는 영향을 정량적으로 분석하는 데 있다. 본 연구에서는 GLUE (Generalized Likelihood Uncertainty Estimation) 기법을 적용하여 조도계수와 유량의 불확실성이 홍수위 해석에 미치는 영향을 분석하고, 강우사상의 크기와 불확실성과의 관계를 분석하였다. 조도계수의 불확실성은 하천기본계획을 참고하여 0.025~0.040의 범위에서 분석하였다. 유량의 불확실성은 수위 h일 때의 유량을 Q라고 할 때, $Q=A(h-B)^C$로 표현되는 수위-유량관계식의 회귀계수 A, B, C를 통해 분석하였다. 수위-유량관계식의 회귀계수를 비선형 회귀분석을 통해 추정하였으며, 회귀계수는 t 분포를 가정하여 95% 신뢰도로 상한과 하한의 범위를 산정하였다. 산정된 회귀계수의 범위는 A는 5.138~18.442, B는 -0.524~0.104, C는 2.427~2.924로 산정되었다. 범위 내에서 10,000개의 매개변수 세트를 추출하여 HEC-RAS (Hydrologic Engineering Center's River Analysis System)에 적용하여 Monte Carlo 모의를 수행하였다. 강우사상 1~3에서 모의된 홍수위의 95% 신뢰구간의 평균적인 범위는 각각 0.39 m, 0.83 m, 0.96 m이며, 첨두 홍수위가 발생했을 때의 범위는 각각 0.52 m, 1.36 m, 1.75 m로 산정되었다. 또한 이천관측소의 1986~2015년의 일 강우에 대한 빈도해석을 수행하였으며, 수행 결과 GEV (Generalized Extreme Vlaue) 분포일 때 강우사상 1~3의 재현기간은 각각 1년, 10년, 25년 빈도에 해당되었다. 본 연구를 통해 강우사상의 크기와 불확실성의 관계를 분석하였으며, 향후 다양한 강우사상에 적용하여 검증한다면 홍수위의 불확실성을 예측하여, 하천관리 등을 위한 구조물의 계획 및 설계 시 의사 결정에 실질적인 도움이 될 수 있을 것으로 사료된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.