• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.4
• /
• pp.415-425
• /
• 2019

This study proposes a new approach to control Moving Stuff Action Through Iterative Learning robot with dual arm for smart factory. When robot moves object with dual arm, not only position of each hand but also contact force at surface of an object should be considered. However, it is not easy to determine every parameters for planning trajectory of the an object and grasping object concerning about variety compliant environment. On the other hand, human knows how to move an object gracefully by using eyes and feel of hands which means that robot could learn position and force from human demonstration so that robot can use learned task at variety case. This paper suggest a way how to learn dynamic equation which concern about both of position and path.

• Journal of IKEEE
• /
• v.27 no.4
• /
• pp.610-616
• /
• 2023

In this paper, we implement an unmanned delivery robot system with Robot Operating System(ROS)-based mobile manipulator, and introduce the technologies employed for the system implementation. The robot consists of a mobile robot capable of autonomous navigation inside the building using an elevator and a Selective Compliance Assembly Robot Arm(SCARA)-Type manipulator equipped with a vacuum pump. The robot can determines the position and orientation for picking up a package through image segmentation and corner detection using the camera on the manipulator. The proposed system has a user interface implemented to check the delivery status and determine the real-time location of the robot through a web server linked to the application and ROS, and recognizes the shipment and address at the delivery station through You Only Look Once(YOLO) and Optical Character Recognition(OCR). The effectiveness of the system is validated through delivery experiments conducted within a 4-story building.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1679-1683
• /
• 2005

This paper suggests the new type of a joint torque sensor which is attached at each joint of a manipulator for making compliance. Previous six axis force/torque sensors are high cost and installed end-effector of the manipulator. However, torque on links of previous an end-effector cannot be measured. We design a joint torque sensor that can be fully integrated with an actuator in order to measure applying torque of the manipulator. The sensor system is designed through the structural analysis. The proposed joint torque sensors are installed to the 6 DOF manipulator of a mobile robot for hazardous works and we implemented experiments of measuring applied torque to the manipulator. By the experiment, we proved that the proposed low-cost joint torque sensor gives acceptable performance when we control a manipulator.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2735-2737
• /
• 2000

In this paper, we deal with modeling and analysis for mobile manipulator systems. In order to avoid the difficulties occurring due to slippage or unevenness of the terrain, we propose the utilization of minimum actuators. In this case, the resulting systems typically possess kinematic redundancies which can be beneficially employed for correcting the position error. A simple PD control method along with kinematic redundancy is employed to recover position errors for trajectory control in task space. Several primary and secondary criteria utilizing kinematic redundancy of the mobile manipulator system are tested through graphic animation.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.12
• /
• pp.87-98
• /
• 1999

This study is concentrated on the development of real-time estimation model and vision control method as well as the experimental test. The proposed method permits a kind of adaptability not otherwise available in that the relationship between the camera-space location of manipulable visual cues and the vector of manipulator joint coordinates is estimate in real time. This is done based on a estimation model ta\hat generalizes known manipulator kinematics to accommodate unknown relative camera position and orientation as well as uncertainty of manipulator. This vision control method is roboust and reliable, which overcomes the difficulties of the conventional research such as precise calibration of the vision sensor, exact kinematic modeling of the manipulator, and correct knowledge of position and orientation of CCD camera with respect to the manipulator base. Finally, evidence of the ability of real-time vision control method for manipulator's position control is provided by performing the thin-rod placement in space with 2 cues test model which is completed without a prior knowledge of camera or manipulator positions. This feature opens the door to a range of applications of manipulation, including a mobile manipulator with stationary cameras tracking and providing information for control of the manipulator event.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.44.3-44
• /
• 2001

This articles describes a novel design elastic joint manipulator for a mobile robot, which works in an office environment with humans. The primary goal of this manipulator design is safeness on collision and contact. To achieve this, each joint is made of an elastic element and this is driver with a high ratio gear tram. The performance was verified, however, it has a serious drawback. It produce vibration, due to the elastic joints and high ratio gear train. We found that a sliding mode controller has an excellent performance for reducing such vibration. Results of computer simulation and experiments are shown.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.230-234
• /
• 1989

This paper presents the design of a prototype robot and architecture of a distributed control system. The robot, named as KAEROT, has been developed for the purpose of the reduction of personal radiation exposure and the remote maintenance tasks in nuclear facilities. The mobile system with robotic manipulator has been designed to go up and down stairs. For the dextrous handling, this manipulator will be designed as a redundant type to act like a human arm. Manipulator control system is to be extended easily for further usage with a modular architecture to get independency and reliability by minimizing EMI effects.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.171.2-171
• /
• 2001

This paper presents a force control of a arm of walking training robot. The current gait training apparatus in hospital are ineffective for the difficulty in keeping constant unloading level and constraining patients to walk freely. The proposed walking training robot is designed to unload body weight effectively during walking. The walking training robot consists of unloading manipulator and mobile platform. The manipulator driven with a electro-mechanical linear mechanism unloads body weight in various level. The mobile platform is wheel type, which allows to patients unconstrained walking. Unloading system with electro-mechanical linear mechanism has been developed, which has advantages such as low noise level, light weight, low manufacturing cost and low power consumption. A system model for the manipulator ...

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1593-1597
• /
• 2003

The home service robot supports human beings by performing various kinds of works at home. This paper presents a simple control method for opening a door from the viewpoint of the mobile manipulation. The simulation shows various results of path planning and motion planning for opening a door. The joint trajectories were generated by the simulation system. In general, a six-axis force/torque sensor at an end-effector is needed in order to maintain the static equilibrium of the manipulator. But we show another method. From three components of applied forces which was directly obtained by the three-axis force sensor and three components of applied forces which was indirectly estimated by the joint-torque sensors, all of joint torques that will exactly balance forces at the end-effector in the static situation can be found. It is more practical method than using a six-axis force sensor in a wrist. Experimental results have shown that the opening a door can be realized more effectively from the suggested control method of mobile manipulation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1087-1090
• /
• 2004

stereo vision system is applied to a mobile manipulator for effective tasks. The robot can recognize a target and compute the position of the target using a stereo vision system. In this paper we persent a visual approach to the problem of object grasping. First we propose object recognization method which can find the object position and pose using feature points. A robot recognizes the feature point to Object. So a number of feature point is the more, the better, but if it is overly many, the robot have to process many data, it makes real-time image processing ability weakly. In other to avoid this problem, the robot selects only two point and recognize the object by line made by two points. Second we propose trajectory planing of the robot manipulator. Using grometry of between object and gripper, robot can find a goal point to translate the robot manipulator, and then it can grip the object successfully.