• Korean Journal of Computational Design and Engineering
• /
• v.4 no.2
• /
• pp.110-120
• /
• 1999

In general, turbine blades are usually machined on 5-axis NC machine. The 5-axis machining of sculptured surface offers many advantages over 3-axis machining including the faster material-removal rates and an improved surface finish. But it is difficult and time-consuming to generated interference-free 5-axis tool path. This paper describes research on the algorithm for generation of an interference-free 5-axis NC data for machining turbine blades. The approach, using the section profile derived from the intersection of cutting planes with a triangulated-surface approximation, includes (1) CL-data generation by detecting an interference-free heel angle (2) the calculation method for finding a adaptive feed-rate value, and (3) the inverse kinematics depending on the structure of 5-axis machine.

• Journal of Mechanical Science and Technology
• /
• v.18 no.5
• /
• pp.753-761
• /
• 2004

In this paper, an efficient method for generating 5-axis cutting data for a turbine blade is presented. The interference elimination of 5-axis cutting currently is very complicated, and it takes up a lot of time. The proposed method can generate an interference-free tool path, within an allowance range. Generating the cutting data just point to the cutting process and using it to obtain NC data by calculating the feed rate, allows us to maintain the proper feed rate of the 5-axis machine. This paper includes the algorithms for: (1) CL data generation by detecting an interference-free heel angle, (2) finding the optimal tool path interval considering the cusp-height, (3) finding the adaptive feed rate values for each cutter path, and (4) the inverse kinematics depending on the structure of the 5-axis machine, for generating the NC data.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1482-1487
• /
• 2003

This paper presents a new family of 4-DoF parallel mechanism with two platforms. The new mechanism is composed of front and rear platforms, and three limbs. Two limbs with 6dof joint (P-P-S-P) are attached to the each platform and are perpendicular to baseplate, while the middle limb with 4-Dof joints (R-R-R-P or R-R-P-P) is attached to the revolute joint that connect front and rear platform. The two-DoF-driving mechanism at the middle limb with two base-fixed prismatic actuators can generate the heaving and roll motions or two translational motions. Therefore, Therefore, the new 4-Dof parallel mechanism (1T-3R) can generate pitch motions at each platforms, roll, and heaving motions, while another type of new 4-Dof parallel mechanism (2T-2R) can generate pitch motions at each platforms, x and z translational motions. For 1T-3R mechanism, kinematic analyses including inverse, forward kinematics, and Jacobian are performed.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.36 no.2
• /
• pp.129-139
• /
• 1987

In this paper the programming language for Hero-1 robot is developed using Apple II micro computer. The language is composed of main monitor mode, editing mode, execution mode, and debugging mode. The main monitor mode is a main flow of the whole language system and controls starting and terminating procedures of operating the controller, and monitors the others. The editing mode has capability to make a user's maniqulation program. Trajectory planning algorithms(point-to-point motion and linear approximate motion)have been realized in the robot language, and in the case of point-to-point motion, inverse kinematics have been solved for the desired point.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1234-1236
• /
• 1996

In this paper, the trajectory needed to be tracked by the manipulator was defined in a new plot differently from conventional methods. And the trajectory provides Solution directly related to coordinates of output variables from the plant. So, it overcomes nonlinearity between joint and Cartesian coordinates in movement mode and it makes use of inverse Kinematics unnecessary, which was obstacle for real-time control. The 2-axis SCARA robot was modelled and simulation was performed to validate in this paper. And it proved this has better performance in rapidity and decrease of position-error, compared to the conventional FLCs.

• The Journal of Korea Robotics Society
• /
• v.17 no.1
• /
• pp.58-67
• /
• 2022

In this paper, we propose an approach resolving inaccuracy of the low-cost redundant manipulator workspace with low encoder and low stiffness. When the manipulators are manufactured with low-cost encoders and low-cost links, the robots can run into workspace inaccuracy issues. Furthermore, trajectory generation based on conventional forward/inverse kinematics without taking into account inaccuracy issues will introduce the risk of end-effector fluctuations. Hence, we propose an optimization for the trajectory generation method based on the DDPG (Deep Deterministic Policy Gradient) algorithm for the low-cost redundant manipulators reaching the target position in Euclidean space. We designed the DDPG algorithm minimizing the distance along with the jacobian condition number. The training environment is selected with an error rate of randomly generated joint spaces in a simulator that implemented real-world physics, the test environment is a real robotic experiment and demonstrated our approach.

• International Journal of Automotive Technology
• /
• v.6 no.4
• /
• pp.403-411
• /
• 2005

The bus is regarded as one of the most frequently used public transportation systems, the research and development on driving stability, safety, and convenience for drivers and passengers has tremendously increased in recent days. This paper investigated the design of the bus door mechanism composed of an actuator (or motor) and linkages. The bus door mechanism is divided into many types according to the coupling of the linkages and the driving system. The mathematical models of all types of door mechanism have been constructed for computer simulation. To design the bus door mechanism, we developed a simulation program, which automates the kinematic and dynamic analysis according to the input parameters of each linkage and the driving system. Using this program, we investigated the design parameters that affect the kinematic and dynamic characteristics of the bus door mechanism under various simulation conditions. In addition, simple examples are examined to validate the developed program.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.916-919
• /
• 2004

In this paper, we proposed a new method of pre-operative planning for tibial deformity correction using double hexapod external fixator in pseudoacondroplasia. The 3-D computer graphic model of deformed tibia was reconstructed from 3 mm sliced CT data, and CAD model of double hexapod external fixator was developed. The fixator was composed of 170 mm diameter of three rings and 90 mm of twelve struts. The bone deformities and the osteotomy lines for double osteotomy were measured using X-rays, and the necessary joint values to correct the given deformities were obtained by inverse kinematics analysis. The computer graphic simulation was performed to visualize the deformity correction process and evaluate the analysis result. By examining the pre-op and post-op X-rays, the simulation result was in good agreement with the clinical outcomes.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.989-992
• /
• 2004

In general, it is known that walking stability of a quadruped is determined by its COG(Center of Gravity). In this paper, in order to know whether our virtual quadruped robot is applicable to the real quadruped robot, we simulated our virtual model using the data from the real robot‘s walking. We were able to evaluate the stride of quadruped based on direct and inverse kinematics and compared the stride of the simulation with real robot’s it. During the simulation we calculated the COG of the virtual model and evaluated the walking stability of real model.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1288-1293
• /
• 2003

This study predicts muscle forces acting on the lower extremity when the knee joint is in deep flexion. The whole bodies were approximated as a link model, and then the moment equilibrium equations at the lower extremity joints were derived for given reaction forces against the ground. Measurement of deep flexion was carried out by placing ten markers on the body. This study calculated the moment acting at each joint from the equations of force and moment, classified the complicated muscles around the knee joint. and then predicted the muscle forces to balance the joint moment. Two models were proposed in this study: the simpler one that consists of three groups of muscle and the more detailed one of nine groups of muscle.