• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.121-126
• /
• 2004

In this paper, a nonlinear structural damage identification algorithm is derived by taking into account the structurally damped spectral element model thinking over a real situation. The structural damage identification analyses are conducted by using the Newton-Raphson method. It is found that, in general Structural Damage Identification by using the Structurally Damped Spectral Element Model provides the same exact damage identification results when compared with the results obtained by the structurally undamped spectral model.

• Smart Structures and Systems
• /
• 제23권2호
• /
• pp.195-205
• /
• 2019

An accurate non-model-based method for delamination identification of laminated composite plates is proposed in this work. A weighted mode shape damage index is formulated using squared weighted difference between a measured mode shape of a composite plate with delamination and one from a polynomial that fits the measured mode shape of the composite plate with a proper order. Weighted mode shape damage indices associated with at least two measured mode shapes of the same mode are synthesized to formulate a synthetic mode shape damage index to exclude some false positive identification results due to measurement noise and error. An auxiliary mode shape damage index is proposed to further assist delamination identification, by which some false negative identification results can be excluded and edges of a delamination area can be accurately and completely identified. Both numerical and experimental examples are presented to investigate effectiveness of the proposed method, and it is shown that edges of a delamination area in composite plates can be accurately and completely identified when measured mode shapes are contaminated by measurement noise and error. In the experimental example, identification results of a composite plate with delamination from the proposed method are validated by its C-scan image.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1711-1716
• /
• 2004

This paper presents identification and control of a 10-m antenna via accelerometers and angle encoder data. Artificial Neural Networks can be used effectively for the identification and control of nonlinear dynamical system such as a large flexible antenna. Some identification results are shown and compared with the results of conventional prediction error method. And we use a neural network inverse model for control the large flexible antenna. In the neural network inverse model, a neural network is trained, using supervised learning, to develop an inverse model of the antenna. The network input is the process output, and the network output is the corresponding process input. The control results show the validation of the ANN approach for identification and control of the 10-m flexible antenna.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권9호
• /
• pp.3858-3869
• /
• 2020

In this paper, we propose a hash-chain based friendly force identification protocol for personal combatants equipped with a personal combat system in a tactical wireless network. It is imperative in military operations to effectively and quickly identify friendly forces. If the identification of friendly forces is not correct, this can cause friendly fire. In current ground operations, the identification of friendly forces by personal combatants is neither secure nor safe. To address this issue, the proposed protocol uses a hash-chain to determine if a detected person is friendly. Only friendly forces with the same materials that are assigned before they deploy can construct an initial hash-chain. Moreover, the hash-chain is changed at specific times. The performance of the proposed protocol is evaluated on the assumption that the secret key is leaked, which is the worst scenario in the security research field. We verify that the proposed protocol is secure for the various attack scenarios, such as message replay attack, fabrication attack, and Denial of Service attack.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.120-123
• /
• 2005

A dynamic system identification technique based on the topology optimization method is developed. The specific problem in consideration is the damage location identification of a plate structure using the Frequency Response Function (FRF) of a damaged structure. In this work, the identification problem is formulated as a topology optimization problem. The importance of using anti-resonance information in addition to using resonance information is addressed. Though a simple problem was considered here, the possibility of using the topology optimization for damage identification is investigated lot the first time.

• Wind and Structures
• /
• 제9권2호
• /
• pp.159-178
• /
• 2006

For the slender and flexible cable supported bridges, identification of all the flutter derivatives for the vertical, lateral and torsional motions is essential for its stability investigation. In all, eighteen flutter derivatives may have to be considered, the identification of which using a three degree-of-freedom elastic suspension system has been a challenging task. In this paper, a system identification technique, known as covariance-driven stochastic subspace identification (COV-SSI) technique, has been utilized to extract the flutter derivatives for a typical bridge deck. This method identifies the stochastic state-space model from the covariances of the output-only (stochastic) data. All the eighteen flutter derivatives have been simultaneously extracted from the output response data obtained from wind tunnel test on a 3-DOF elastically suspended bridge deck section-model. Simplicity in model suspension and measurements of only output responses are additional motivating factors for adopting COV-SSI technique. The identified discrete values of flutter derivatives have been approximated by rational functions.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.635-640
• /
• 2001

This paper introduces a frequency-domain method of structural damage identification. It is formulated in a general form from the dynamic stiffness equation of motion for a structure and then applied to a beam structure. The appealing features of the present damage identification method are: (1) it requires only the frequency response functions experimentally measured from damaged structure as the input data, and (2) it can locate and quantify many local damages at the same time. The feasibility of the present damage identification method is tested through some numerically simulated damage identification analyses and then experimental verification is conducted for a cantilevered beam with damage caused by introducing three slots.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.699-702
• /
• 2009

This paper proposes a gender identification using shoeprint images. It is difficult for the proposed method to identify an individual if shoeprint images for identification leaked out. Because the proposed method identifies gender without the faces, the type of dress and the hair types images. Therefore we can use safely the proposed method in public place. In addition, a sensor mat which we developed is reasonable to use mechanical switches arranged in a matrix pattern without pressure switches. We had shoeprint images with the sensor mat. We measure feature parameters from shoeprint images. The feature parameters are length, width and area of shoeprint. Utilizing the feature parameters, we identified gender. In order to verify the gender identification rate of the proposed method, we set up the sensor mat at an entrance of buildings and took shoeprint images of 100 men and 100 women. As a result, we achieved about 86 percent of the gender identification rate.

• 한국컴퓨터정보학회논문지
• /
• 제22권2호
• /
• pp.1-7
• /
• 2017

Recently, NAND flash memory, which is used as a storage medium, is replacing HDD (Hard Disk Drive) at a high speed due to various advantages such as fast access speed, low power, and easy portability. In order to apply NAND flash memory to a computer system, a Flash Translation Layer (FTL) is indispensably required. FTL provides a number of features such as address mapping, garbage collection, wear leveling, and hot data identification. In particular, hot data identification is an algorithm that identifies specific pages where data updates frequently occur. Hot data identification helps to improve overall performance by identifying and managing hot data separately. MHF (Multi hash framework) technique, known as hot data identification technique, records the number of write operations in memory. The recorded value is evaluated and judged as hot data. However, the method of counting the number of times in a write request is not enough to judge a page as a hot data page. In this paper, we propose hot data identification which considers not only the number of write requests but also the persistence of write requests.

• 말소리와 음성과학
• /
• 제2권3호
• /
• pp.135-139
• /
• 2010

Forensic speaker identification needs high accuracy and reliability. However, the current level of speaker identification does not reach its demand. Therefore, the confidence evaluation of results is one of the issues in forensic speaker identification. In this paper, we propose a new confidence measure of forensic speaker identification system. This is based on pitch differences between the registered utterances of the identified speaker and the test utterance. In the experiments, we evaluate this confidence measure by speech identification tasks on various environments. As the results, the proposed measure can be a good measure indicating if the result is reliable or not.