• 한국지반공학회논문집
• /
• 제20권4호
• /
• pp.75-88
• /
• 2004

사질토 지반의 원형수직구에 설치된 흙막이벽에 작용하는 토압은 축대칭 아칭효과로 인하여 평면변형조건의 옹벽에 작용하는 토압보다는 작은 토압이 작용한다. 따라서, 수평 및 연직방향 아칭효과에 의한 토압감소를 고려하고 상재하중, 벽면마찰, 파괴면의 경사각 등 각종 인자의 영향을 적절히 반영하여 원통형 벽체에 작용하는 토압을 예측할 수 있는 토압산정공식이 제안되었다. 제안된 토압공식의 적용성 확인을 위하여 모형실험이 수행되었다. 벽체변위, 벽면마찰, 벽체 형상비 등을 조절할 수 있는 모형실험장치가 개발되었으며, 건조한 모래지반에서 깊이에 따른 벽체변형이 일정한 조건의 모형실험을 통하여 각각의 영향인자가 원통형 벽체에 작용하는 주동토압에 미치는 영향이 분석되었다. 제안된 토압공식은 모형실험에 의한 토압분포와 유사한 경향을 예측하여 만족스러운 결과를 주는 것으로 나타났다.

• 대한치과교정학회지
• /
• 제22권1호
• /
• pp.89-107
• /
• 1992

The purpose of this study was to investigate the difference between normal and malocclusion subjects in Temporomandibular joint. This study was based on the 44 subjects with normal occlusion, 30 subjects with Class II malocclusion, 30 subjects with Class III malocclusion before treatment. After submental vertex view analysis, each subject was given the TMJ Tomogram in centric relation and centric occlusion and the Cephalogram was taken with Quint Sectograph. The TMJ spaces were measured and analyzed statistically. Following results were obtained. 1. When centric relation was compared to centric occlusion, The condyles were positioned more posteriorly and superiorly in centric relation position of the normal occlusion group and the class II malocclusion group. In the Class III malocclusion group. There was no significant difference in the condylar position between centric occlusion and centric relation. 2. The condyles of the Class III malocclusion group were positioned more superiorly than the normal occlusion group and the Class II malocclusion group. 3. In the correlation between articular eminence posterior slope angle and lingual slope angle of the upper anterior central incisor, there was significant correlation in the normal occlusion group. But no significant correlation was found in the malocclusion group. 4. The mean value of the horizontal angulation of condylar head to the transear rod axis plane was $20.32^{\circ}{\pm}8.12^{\circ}$ in the normal occlusion group, $25.08^{\circ}{\pm}4.83^{\circ}$ in the class II malocclusion group, $14.68^{\circ}{\pm}4.08^{\circ}$ in the class III malocclusion group.

• Journal of Biosystems Engineering
• /
• 제38권2호
• /
• pp.81-86
• /
• 2013

Purpose: Recently, domestic and abroad consumption of mushroom has been increasing. Especially, oyster mushroom has been the most consumed product, sharing one third of the mushroom market. The air temperature differences between relative positions of the mushroom farms were needs to be minimal. However, in reality, the air temperature differences ranged from 2 to $5^{\circ}C$. Because of this, the mushrooms are non-uniform growth as well as decrease in both quality and quantity. Although air circulators have been employed by oyster mushroom farms to minimize air temperature differences, no experiments have been performed to illustrate the effect of the air circulators. Methods: This experiment is designed to analyze the effect of the air circulation by constructing a prototype air circulator and measuring the air temperature when the circulator was position at different heights (50 cm, 150 cm, 200 cm) from the floor in the center. Result: The horizontal plane air temperature of the first growing bed when the air circulator was installed 50cm above the floor in the center, once not using the air circulators and the other time using the air circulators, yielded the air temperature differences of $8.6^{\circ}C$ and $1.8^{\circ}C$ and deviations of 2.82 and 0.60, respectively. The third growing bed's air temperature differences were $10.0^{\circ}C$, $1.6^{\circ}C$ and deviations 3.28, 0.64, each respectively. These outcomes proved that the use of air circulators minimized the air temperature difference and deviation. The use of air circulators helped minimize the air temperature differences and the derivations in oyster mushroom farm. Conclusion: The use of air circulators helped balance the air temperature distribution in oyster mushroom farm.

• 대한치과교정학회지
• /
• 제48권3호
• /
• pp.172-181
• /
• 2018

Objective: This study was performed to investigate buccal facial depth (BFD) changes after extraction and nonextraction orthodontic treatments in post-adolescent and adult female patients, and to explore possible influencing factors. Methods: Twelve and nine female patients were enrolled in the extraction and nonextraction groups, respectively. Changes in BFD in the defined buccal region and six transverse and two coronal measuring planes were measured after registering pretreatment and posttreatment three-dimensional facial scans. Changes in posterior dentoalveolar arch widths were also measured. Treatment duration, changes in body mass index (BMI), and cephalometric variables were compared between the groups. Results: BFD in the buccal region decreased by approximately 1.45 mm in the extraction group, but no significant change was observed in the nonextraction group. In the extraction group, the decrease in BFD was identical between the two coronal measuring planes, whereas this differed among the six transverse measuring planes. Posterior dentoalveolar arch widths decreased in the extraction group, whereas these increased at the second premolar level in the nonextraction group. The treatment duration of the extraction group was twice that of the nonextraction group. No differences were found in BMI and Frankfort horizontal-mandibular plane angle changes between the groups. BFD changes in the buccal region moderately correlated with treatment duration and dental arch width change. Conclusions: BFD decreased in adult female patients undergoing extraction, and this may be influenced by the long treatment duration and constriction of dentoalveolar arch width. However, nonextraction treatment did not significantly alter BFD.

• 대한전자공학회논문지TC
• /
• 제42권9호
• /
• pp.97-100
• /
• 2005

본 논문에서는 433MHz에서 동작하는 RFID 리더용 직교형 안테나에 관하여 기술하였다 본 이중편파 안테나는 1x2 서브어레이를 기본으로 하여 급전회로망의 위상을 동위상 또는 반대 위상을 갖도록하여 2개 안테나의 방사체에서의 상대적인 전류 분포를 제어하여 빔 패턴에서 편파를 수직 및 수평으로 복사가 가능토록 하였다 단일 안테나는 역-에프형 구조를 이용하였으며 위상차에 따른 단락점에서부터 개방점 까지의 전류의 변화가 궁극적으로 수직 및 수평 편파가 제어되도록 하였다 이중입력에 대한 안테나의 이득은 수직 및 수평 편파에 대하여 2.7 및 0.4 dBi를 나타내었으며, 포트간 아이솔레이션은 25dB 이하의 특성을 나타내었다.

• 한국지구과학회지
• /
• 제26권8호
• /
• pp.809-820
• /
• 2005

The fluvial sequence developed along the channel margin of meander bends in the midstream of the Yeongsan River consists of channel deposits at the bottom and overbank deposits at the top, and shows a fining-upward trend. The fluvial deposits consist of 7 sedimentary facies, and facies association forms 7 architectural elements. The channel deposits formed as channel bar or point bar. The channel bar deposits consisted of architectural element of gravel bedform were formed by channel lag deposits within the channel; whereas, the channel bar deposits consisted of architectural elements of downcurrent-dipping inclined strata sets, cross-stratified and horizontally stratified sets, and horizontally stratified sets were formed by downstream migration of sand wave or downstream transport of sand by traction current in the upper flow regime conditions within the channel. The point bar deposits consist of architectural elements of down current-dipping inclined strata sets, horizontally stratified sets, cross-stratified and horizontally stratified sets, and laterally inclined and horizontally stratified sets. These architectural elements are thought to have been formed by the combined effects of the migration of sand dunes and the formation of horizontal lamination in the upper flow regime plane bed conditions. The overbank deposits consist of the architectural elements of overbank fine and sand sheet and lens. The overbank fines were formed by settling of mud from slackwater during flooding over floodplain whereas the sand sheet and lens were formed by traction of sands introduced episodically fiom channel to the overbank during flooding.

• 대한치과교정학회지
• /
• 제20권3호
• /
• pp.427-446
• /
• 1990

The objective of this study was to understand the major changes of craniofacial dimensions and spatial growth pattern during the late embryonic and fetal period of human fetures. This study was performed with the selective materials of normal fetuses received from the Registry of Congenital Malformation of Seoul National University Hospital. The specimens consisted of nineteen embryos and sixty-six fetuses. The photomicrographs from mid-segittal sections of embryos were used for angular measurement, and the lateral cephalograms taken with soft X-ray were also measured in liners and angular aspects. All of the anatomical landmarks for the tracing of the photomicrographs and cephalograms were referred to the previous reports on literature. The sequential changes of prenatal craniofacial dimensions and agles were analysed statistically and discussed on the focus about the developmental growth directions of human ore-facial structure arised from heterogeneous origins. The results are as follows, 1) Cranial base angle was almost formed at about 6 weeks old embryos with the average angle of $127.4{\pm}6.33^{\circ}$ (n=3) and it was almost constant onwards. 2) The linear increase rates of anterior cranial base length and anterior facial height exceeded those of the posterior cranial base length and posterior facial height, and the maxilla grows more rapidly on the horizontal dimension than the vertical dmension during the fetal period. 3) The angular relationship between the anterior cranial base and palatal plane decreasedslightly during the fetal period, disclosing $11^{\circ}$ at 12th week gestation and $5^{\circ}$ at 41th weeks gestation. 4) Genial angle was maintained almost constantly at about $130^{\circ}$ during the fetal period from 12 weeks to 41 weeks of gestation.

• Archives of Plastic Surgery
• /
• 제34권1호
• /
• pp.24-36
• /
• 2007

Purpose: Direct anthropometry is an ideal method for preoperative planning and postoperative evaluation in plastic surgery, but it requires highly skilled specialty. Indirect anthropometry, especially photogrammetry, is an alternative method. In photogrammetry, standardized clinical photography is essential. Photogrammetry-based standardized clinical photography has several advantages over direct anthropometry. It is easier to measure and has less chance to make errors during measurement. Furthermore, it is possible to repeat measurements, and available for follow up study based on permanent custody. But, it is still different from actual measurement, and inherently less accurate than anthropometry. Methods: The authors revised the standardized clinical photography and then, carried out photogrammetry using Photoshop(Adobe, U.S.A.), and compared each data with those of anthropometry. The subjects were 50 males and 50 females, undergraduate medical students in twenties. Standard head position was obtained from the wire, fixed to cephalostat which indicates the Frankfort horizontal plane. All photographs were taken at the same situation such as fixed position of light, subject and camera, etc. Results: Total 96 measurements, based on 40 landmarks, consist of linear measurements, angular measurements and inclinations include 3 measurements in head, 22 in face, 15 in orbit, 28 in nose, 16 in lip and mouth, and 12 in ear. Conclusion: Normal photogrammetric data of face of Korean in twenties was obtained. Reliable photogrammetric measurements, not significantly different from anthropometric measurement statistically, accounted for 44 in 96 measurements(45.8%). Anthropometric values different from those of photogrammetric values were obtained by multiplying coefficient by photogrammetric value.

• 대한치과교정학회지
• /
• 제32권4호
• /
• pp.275-291
• /
• 2002

스트레이트 와이어 장치의 효율적 운영을 위해서 제시되어야 할 여러 사항 중 치관의 굴곡도에 대한 연구는 국내, 외에서 매우 미흡하다. 이에 본 연구는 한국인 영구치의 순, 협측 임상치관 굴곡도를 조사하기 위해 시행되었다 이를 위해 정상적인 해부학적 구조를 갖고있는 구강 석고모형 36쌍을 대상으로 3차원 레이저 스캐닝 하였다. Andrews plane 과 Facial axis of clinical crown(FACC)을 각각 수평 , 수직 기준선으로 설정하고, 이들로부터 상, 하 방향과 좌, 우 방향으로 각각 1m간격으로 2개 혹은 3개씩의 선을 그었다. 이들 선이 교차하는 점들에 대한 3차원적 점 좌표를 만들어 놓고 36쌍 구강 석고모형의 각각 좌표점들의 평균을 구하였다 3차원 좌표 점(x,y,z)을 이용해 곡면 방정식을 만들어 각 치아의 곡률을 구하였고, 가로, 세로 각 방향의 2차원 곡선으로 단순화시킨 곡선에서의 곡률을 구하여 치아 부위마다의 곡률 변화를 계측하여 다음과 같은 결론을 얻었다. 1. 한국인 영구치 치관의 순, 협면 굴곡도의 기초자료를 얻었다. 2. 남, 녀 간에 치관 굴곡도 차이는 없었다. 3. 개개 치아의 치관 굴곡에 대한 특성 1) 상악 중절치에서 치은쪽과 절단면쪽의 곡률 차이가 다른 치아에 비해 심하였으며, 치은쪽이 더욱 심한 곡률을 보였다. 2) 상악 견치의 치관 굴곡도는 근심-절단면쪽의 굴곡이 다른면에 비해 더 심하였다. 3) 상악 제 1소구치에서는 근심-교합면쪽과 원심-치은쪽에서의 굴곡이 더 심하여 치관 표면의 굴곡이 대각선 방향으로 서로 뒤틀린 반면, 상악 제 2소구치에서는 근심 끝과 원심 끝의 치관 표면 굴곡이 비슷하여 서로 평행하게 나타났다. 4) 하악 중절치와 하악 측절치의 치관 굴곡도에는 유의한 차이가 없었다. 5) 하악 제 2소구치의 교합면-치은쪽으로의 굴곡이 하악 제 1소구치나 상악 제 2소구치에 비하여 더 둥근 것으로 나타났다. 이상의 결과로 볼 때, 하악 중절치와 측절치는 브라켓 베이스를 같게 해도 무방하다. 그러나 상악 제 1소구치와 제 2소구치, 그리고, 하악 제 1소구치와 제 2소구치는 치관 굴곡도에 차이가 있으므로 브라켓 제작시 베이스의 굴곡을 다르게 하여야 한다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제33권2호
• /
• pp.152-161
• /
• 2007

This study was conducted to patients visited oral maxillo-facial surgery, KNUH and the purpose of the study was to assess skeletal and dento-alveolar stability after surgical-orthodontic correction treated by skeletal Class III malocclusion patients with open bite versus non-open bite. This retrospective study was based on the examination of 40 patient, 19 males and 21 females, with a mean age 22.3 years. The patients were divided into two groups based on open bite and non-open bite skeletal Class III malocclusion patients. The cephalometric records of 40 skeletal Class III malocclusion patients (open bite: n = 18, non-open bite: n = 22) were examined at different time point, i.e. before surgery(T1), immediately after surgery(T2), one year after surgery(T3). Bilateral sagittal split ramus osteotomy was performed in 40 patients. Rigid internal fixation was standard method used in all patient. Through analysis and evaluation of the cephalometric records, we were able to achieve following results of post-surgical stability and relapse. 1. There was no significant statistical differences between open bite and non-open bite with skeletal Class III malocclusion patients in maxillary occlusal plane angle of pre-operative stage(p>0.05). 2. Mean vertical relapses of skeletal Class III malocclusion patients with open bite were $0.02{\pm}1.43mm$ at B point and $0.42{\pm}1.56mm$ at Pogonion point. In skeletal Class III malocclusion patients with non-open bite, $0.12{\pm}1.55mm$ at B point and $0.08{\pm}1.57mm$ at Pogonion point. There was no significant statistical differences between open bite and non-open bite with skeletal Class III malocclusion patients in vertical relapse(p>0.05). 3. Mean horizontal relapses of skeletal Class III malocclusion patients with open bite were $1.22{\pm}2.21mm$ at B point and $0.74{\pm}2.25mm$ at Pogonion point. In skeletal Class III malocclusion patients with non-open bite, $0.92{\pm}1.81mm$ at B point and $0.83{\pm}2.11mm$ at Pogonion point. There was no significant statistical differences between open bite and non-open bite with skeletal Class III malocclusion patients in horizontal relapse(p>0.05). 4. There were no significant statistical differences between open bite and non-open bite with skeletal Class III malocclusion patients in post-surgical mandibular stability(p>0.05). and we believe this is due to minimized mandibular condylar positional change using mandibular condylar positioning system and also rigid fixation using miniplate 5. Although there was no significant relapse tendency observed at chin points, according to the Pearson correlation analysis, the mandibular relapse was influenced by the amount of vertical and horizontal movement of mandibular set-back(p=0.05, r>0.304).