• 제목/요약/키워드: a dressing

검색결과 1,185건 처리시간 0.028초

공동주택의 드레스룸 공간계획 특성에 관한 연구 (An Analysis on the Characteristic of the Dressing-Room Planning in the Apartment Building)

  • 박소윤;이경아;이현수
    • 한국실내디자인학회:학술대회논문집
    • /
    • 한국실내디자인학회 2005년도 추계학술발표대회 논문집
    • /
    • pp.44-47
    • /
    • 2005
  • The purpose of this study is to identify the characteristics of the Dressing-Room lay-out in brand-apartments as the strategy for the differentiation. The 441 floor-plans are collected by searching web-sites of the 5 main construction companies. The major findings are summarized as follows: (1) The Dressing-Rooms are designed in the 331 cases among 441 the floor-plans including the Dressing-Room are generally over 30 Pyeong(about 99 square meters). In addition, the entire cases above 60 Pyeong(about 198 square meters) include the Dressing-Room. (2) The size of the Dressing-Room is increased in proportion to the square meter. However, the ratio is the small range of fluctuation. (3) The types of Dressing-Room units are classified 4 categories : a dressing-room joined powder room, a dressing-room separated from bathroom, a dressing room without powder room, a powder room centering with dressing room and bathroom.

  • PDF

Effectiveness of double tie-over dressing compared with bolster dressing

  • Lee, Seo Hyung;Kim, Yu Jin
    • Archives of Plastic Surgery
    • /
    • 제45권3호
    • /
    • pp.266-270
    • /
    • 2018
  • Background Skin grafting is a commonly performed operation in plastic and reconstructive surgery. The tie-over dressing is an effective technique to secure the grafted skin by delivering persistent downward pressure. However, if an additional dressing is required due to incomplete graft healing, the process of re-implementing the tie-over dressing may be frustrating for both patients and surgeons. Therefore, we introduce the double tie-over dressing, which readily allows for an additional tie-over dressing after the first dressing, and we present a comparison of its effectiveness with that of the simpler bolster dressing. Methods Of 128 patients with a skin defect, 69 received a double tie-over dressing and 59 patients received a simple bolster dressing. Using the independent t-test, the mean healing time, which was defined as the mean time it took for the wound to heal completely so that no additional dressing was required and it was washable with tap water, was compared between the 2 groups in both the head and neck region and in other areas. Results The mean healing time for the head and neck region in the double tie-over dressing group was $9.19{\pm}1.78days$, while it was $11.05{\pm}3.85days$ in the bolster dressing group. The comparison of the 2 groups by the independent t-test revealed a P-value of 0.003 for the mean healing time. Conclusions In the head and neck area, the double tie-over dressing required less time to heal than the simple bolster dressing.

Effects of Wound Dressing with Thiophanate-Methyl Paste on Compartmentalization of Pruning Wounds

  • Lee, Kyu-Hwa;Lee, Kyung-Joon
    • 한국산림과학회지
    • /
    • 제99권2호
    • /
    • pp.220-225
    • /
    • 2010
  • This study was conducted to examine the effects of wound dressing with thiophanate-methyl paste on the compartmentalization of pruning wounds in Acer palmatum. A total of thirty field-grown trees were used for three different treatments, such as no dressing, dressing once right after pruning cut, and dressing twice, one more dressing treatment one year after initial dressing. Wound closure rate (WCR) and discolored/wound area ratio (D/W ratio) two years after treatment were measured. Variations of extractives, holocellulose and lignin at the treated branch unions were also examined. The WCR of no dressing treatment of 70.9% was significantly lower than those of the two dressing treatments (85.4% and 82.7%, respectively), while the difference between dressing once and twice was not significant. The D/W ratio of no dressing treatment (39.3%) was significantly higher than those of the two dressing treatments (around 30%). Generally, at the branch core of the treated union, contents of extractives and lignin were higher and holocellulose contents were lower than the branch core of the union with living branch. Among the branch core of treated union, no dressing treatment showed a relatively lower holocellulose (63.5%), and relatively higher extractives (2.8%) and lignin (26.6%) than dressing once (66.2%, 1.7%, 26.1%, respectively).

표고버섯을 이용한 샐러드 드레싱 제조의 품질 특성 (Quality Characteristics of Oak Mushroom Salad Dressing)

  • 정현아;김안나
    • 동아시아식생활학회지
    • /
    • 제21권5호
    • /
    • pp.669-676
    • /
    • 2011
  • This study was conducted to develop a novel salad dressing composite recipe composed of natural seasoning containing dried oak mushroom (Lentirus edodes). Dried oak mushroom (Lentirus edodes) has a better flavor and more nutrients than fresh oak mushroom since vitamins are activated during the drying process. To manufacture salad dressing with Lentirus edodes, dressing with 0%, 3%, 6%, 9%, and 12% added L. edodes were prepared and tested for quality. The pH of the dressing decreased with added L. edodes content, whereas acidity increased but decreased again in the 9% dressing. The L value decreased with added L. edodes content, whereas the a and b values increased but decreased again in the 9% dressing. Sugar content increased with added L. edodes. Rradish strength increased with added oak mushroom. Brittleness and chewiness decreased in the lower percentage dressing, increased in the 9% dressing, but decreased again in the 12% dressing. According to the sensory evaluation results, the highest overall acceptability was 3.3, in the 6% dressing compared to the control group.

다이야몬드 숫돌의 고능률 Dressing 에 관한 연구 (A Study on High Efficiency Dressing of Diamond Grinding Wheel)

  • 최강일;강재훈;정윤교
    • 한국정밀공학회지
    • /
    • 제8권2호
    • /
    • pp.106-113
    • /
    • 1991
  • A diamond grinding wheel is generally used to grind hard and brittle materials, such as advanced ceramics. It is, however, quite difficult to dress a diamond grinding wheel efficiently because of its high degree of hardness. In this study, some investigations are carried out to increase dressing efficiecy of resinoid bonded diamond grinding wheel. Dressing forces are measured over a wide range of dressing conditions, and SEM observation of a grinding wheel is carried out. Special attention is paid to comparison between stick method and rotary brake method. Results obtained in this study provide useful information determining reguired dressing time, and for choosing efficient dressing condition for diamond grinding wheel.

  • PDF

느릅나무 근피 드레싱이 쥐에 유발된 화상의 회복에 미치는 효과 (The Effect of Ulmus Dressing on Burn Wound in Rats)

  • 나연경;홍해숙
    • Journal of Korean Biological Nursing Science
    • /
    • 제7권1호
    • /
    • pp.89-98
    • /
    • 2005
  • Purpose : The purpose of this study is to compare the effect of Ulmus(root-bark) dressing with vaseline gauze dressing on burn wound(third degree) in rats. Method : Ten male Sprague-Dawley rats were used in the study. The rats were anesthetized with Ketamine l00mg/kg. burn wounds were made for each animal by specially designed apparatus. Ulmus dressing was applied once a day for 4 weeks in the experimental group(n=5), vaseline gauze dressing in the control group(n=5). The wounds were photographed and excised. Result : After 10 days of dressing, size of burn wounds of Ulmus dressing group decreased significantly compared to that of vaseline gauze dressing group. After 10 days of dressing, degree of inflammatory infiltration was shown lower in Ulmus dressing than in vaseline gauze group. There was no significant difference after dressing at day of 19 and 27 in degree of inflammatory infiltration.

  • PDF

다이아몬드휠의 드레싱 조건에 관한 연구 (A Study on the Dressing Conditions of Diamond Wheel)

  • 하상백;정재극;이종찬
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1997년도 춘계학술대회 논문집
    • /
    • pp.1020-1024
    • /
    • 1997
  • Recently the use of ceramic materals has been greatly increased in the industries. But machining of the ceramics is quite unproductive because of their high stength,high hardness,and brittleness. The efficiency of the grinding operation of ceramics depends on the preparation of diamond grinding wheel, i.e.,truning and dressing. This paper describes some experimental results on the dressing conditions of diamond grinding wheel. The dressing performance is evaluated by the magnitude of normal grinding force. The better dressed wheels result in the lower normal grinding forces. The dressing performances of copper plate and aluminum oxide dressing stick are compared. The optimum dressing conditions including the grit size of dressing sticks, the depth of the dressing operation, and the dressing speed qre determined.

  • PDF

크로스 드레싱에 관한연구 (A Study on the Cross-Dressing)

  • 양숙희
    • 복식
    • /
    • 제35권
    • /
    • pp.111-134
    • /
    • 1997
  • The purpose of this paper is to examine into the cross-dressing. Cross-dressing means 'dress-ing in clothes of the opposite sex' which has increased under the contemporary conditions. There also have been various cross-dressing phenomena in past but it appears strongly now that it would destroy the cultural stereo-types and give rise to the cultural insecurities in the contemporary conditions,. In this paper the author classified cross-dressing with the oppositional cross-dressing the perverted cross-dressing and the custom-ary cross-dressing. And the results are as follows 1. The oppositional cross-dressing has increased under the influence of feminism movements homosexual identities and subcul-tural identities. 2. The perverted cross-dressing has ap-peared in various social cultural contexts that is in the regional theratrical and the religious habits. Cross-dressers have used the clothes as an instrument for which the solve the contradic-tion between sex and gender role. And through the cross-dressing phenomena we can find all the category crises which are related with sex and gender but simultaneously we can search for all the possibilities through the open thought.

갈고리와 고무밴드를 이용한 새로운 봉합고정드레싱법 (New Tie-over Dressing Method Using Hooks and Rubber Bands)

  • 김국진;이윤정;김남균;김준식;이경석
    • Archives of Plastic Surgery
    • /
    • 제38권4호
    • /
    • pp.552-554
    • /
    • 2011
  • Purpose: Though its general usage, traditional tie-over dressing using suture has a few drawbacks such as difficulty in re-fixation after its opening especially when hematoma or seroma has occurred. It is rather difficult to maintain a stable dressing on curvy parts of body like flank, buttocks and that leads to unsatisfactory results of the surgery. Authors recommend a quick and repeatedly doable method, tie-over dressing that incorporates the usage of hooks and rubber bands. Methods: Debridement was done at a recipient site to be able to do skin graft. A right size of skin graft was prepared and placed upon the defect site with suture. Enough number of hooks were attached using Blue nylon at the normal skin of the edge of grafted area. We Applied dressing with ointment and fluffy gauze then fixed the dressing by attaching a rubber band at the hook to give a certain amount of tension. One or two days after the surgery, we opened the tie-over dressing and repeated the tie-over dressing by reusing the hooks and rubber band. Results: The skin grafts were all successfully taken and by repeating tie-over dressing using hooks and rubber, we could take the advantage of shortened the dressing time and eliminate the inconvenience of the patient and the surgeon by using bandages and fixing tapes. Conclusion: The advantage of tie over dressing using hooks and rubber bsnds are its easy re-doability early detection of probable complications, preventability of reoccurence of hematoma and seroma. Therefore, authors report this as considering the tie-over dressing using hooks and rubber bands is recommendable.

OrthoMTA 컴팩터의 크리프피드 CBN 연삭을 위한 드레싱 조건 연구 (Study on Dressing Conditions for Creep-feed in Cubic Boron Nitride Grinding of OrthoMTA Compacters)

  • 맹희영;백은표
    • 한국생산제조학회지
    • /
    • 제23권1호
    • /
    • pp.69-74
    • /
    • 2014
  • An OrthoMTA compacter is made by machining a Ni-Ti alloy wire using tapered helix creep-feed grinding machines. This aim of this study is to find the optimal dressing conditions to sharpen the corner of a cubic boron nitride (CBN) wheel. On the basis of the results of various experiments, it is verified that the most important factors in dressing are the dressing depth and feeding method, whereas the feed rate has less importance for producing a smaller corner R value. The study also finds the optimum dressing depth to reduce the dressing time, a feeding speed and method to stabilize the machining, and the mesh grade for the CBN wheel to make the groove of the compacter deeper.