• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1583-1586
• /
• 2006

All non-dopant white organic light-emitting diodes (WOLEDs) have been realized by using solid state highly fluorescent red bis(4-(N-(1- naphthyl)phenylamino)phenyl)fumaronitrile (NPAFN) and amorphous bipolar blue light-emitting 2-(4- diphenylamino)phenyl-5-(4-triphenylsilyl)phenyl- 1,3,4-oxadiazole (TPAOXD), together with well known green fluorophore tris(8- hydroxyquinolinato)aluminum $(Alq_3)$. The fabrication of multilayer WOLEDs did not involve the hard-tocontrol doping process. Two WOLEDs, Device I and II, different in layer thickness of $Alq_3$, 30 and 15 nm, respectively, emitted strong electroluminescence (EL) as intense as $25,000\;cd/m^2$. For practical solid state lighting application, EL intensity exceeding $1,000\;cd/m^2$ was achieved at current density of $18-19\;mA/cm^2$ or driving voltage of 6.5-8 V and the devices exhibited external quantum efficiency $({\eta}_{ext})$ of $2.6{\sim}2.9%$ corresponding to power efficiency $({\eta}_P)$ of $2.1{\sim}2.3\;lm/W$ at the required brightness.

• 대한화학회지
• /
• 제54권3호
• /
• pp.291-294
• /
• 2010

본 연구에서는 다양한 농도의 BCzVBi를 청색 형광도판트, DPVBi를 청색 호스트 물질로 적용한 청색OLED 소자를 제작하였다. 최적화된 고효율 청색 OLED 소자의 적층 구조는 NPB (500 ${\AA}$)/DPVBi:BCzVBi-6%(150 ${\AA}$)/$Alq_3$(300 ${\AA}$)/Liq(20 ${\AA}$)/Al (1000 ${\AA}$)으로 구성되었다. 청색 OLED의 최대휘도는 구동전압 13.8V에서13200 cd/$m^2$이고 전류밀도 및 최대효율은 각각 1000 cd/$m^2$의 휘도에서 26.4 mA/$cm^2$, 구동전압 3.9 V에서 4.24 cd/A 이었다. 도핑된 청색 OLED 소자의 발광효율은 도핑되지 않은 소자의 2배에 이른 반면 색좌표는 (0.16, 0.19)로 서로 비슷하였다. BCzVBi가 6% 도핑된 청색 OLED 445 nm와 470 nm에 2개의 EL 스펙트럼의 Peak이 존재하는 반면 도핑되지 않은 순수한 DPVBi 청색OLED 소자는 456 nm에서의 유일한 Peak만을 보여주고 있다. 이는 호스트 물질인 DPVBi의 LUMO와 도판트 물질인 BCzVBI의 LUMO 사이에 분자 진동에 의한 페르스터 에너지 전이에 기인한 것이다.

• 한국재료학회지
• /
• 제15권8호
• /
• pp.543-547
• /
• 2005

Organic electroluminescence devices were made from 1,4-bis-(9-anthrylvinyl)benzene (AVB) and 1,4-bis-(9-aminoanthryl)benzene (AAB) anthracene derivatives. Device structure was ITO/AVB/PANI(EB)/Al (multi-layer device) and ITO/AAB:DCM/Al(single-layer device). In these devices, AVB, polyaniline(emeraldine base) (PANI(EB)) and AAB were used as the emitting material. 4-(dicyanomethylene)-2-methyl-6-p-(dimethylamino)styryl-4H -pyran(DCM) was used as red fluorescent dopant. We studied change of fluorescence wavelength with concentration of DCM doped in AAB. The ionization potential (IP) and optical band gap (Eg) were measured by cyclic voltammetry and UV-visible spectrum. We compared with difference of emitting wavelength between photoluminescence and electroluminescence spectrum. In case of the multi-layer device, PANI and AVB EL spectra have similar wave pattern to each PL spectrum and when PAM and AVB were used at the same time, and multi-layer device showed that a balanced recombination and radiation kom PANI and AVB. In case of the single-layer device, with the increase of DCM concentration, the blue emission decreases and red emission increases. This indicates that DCM was excited by the energy transfer from AAB to DCM or the direct recombination at the dopant sites due to carrier trapping, or both. The device with $1.0wt\%$ DCM concentration gave white light.