• 대한치과기공학회지
• /
• 제33권4호
• /
• pp.323-329
• /
• 2011

Purpose: This study was conducted to examine the phase transition according to the zirconia surface treatment. Methods: The specimens were divided to four groups. The first group was sintered at $1,500^{\circ}C$ and ground; the second group was sintered at $700^{\circ}C$, ground, and sintered at $1,500^{\circ}C$; the third group was sintered at $1,500^{\circ}C$, ground, and $110{\mu}m$-sandblasted; and the fourth group was sintered at $1,500^{\circ}C$, ground, $110{\mu}m$-sandblasted, treated with 9.5% hydrofluoric acid, and ultrasonic cleaner-washed for two minutes. The monoclinic fractions were measured, and the surface was observed via SEM. Results: The monoclinic fraction was $0.13{\pm}0.19%$ in the control group Zr1, $1.91{\pm}0.15%$ in the experimental group Zr2, $7.71{\pm}0.34%$ in Zr3, and $8.39{\pm}0.25%$ in Zr4. On the surface, the phase transition hardly occurred in the control group Zr1, but it increasingly occurred in the experimental groups Zr3 and Zr4. Conclusion: The monoclinic fraction was high in the experimental groups Zr3 and Zr4. The phase transition did not occur in the control group, but increasingly occurred in the experimental groups.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권6호
• /
• pp.533-540
• /
• 1997

The microwave dielectric properties of ((P $b_{1-x}$ C $a_{x}$)Zr $O_3$ and (P $b_{0.63}$,C $a_{0.37-x}$ $M_{x}$)Zr $O_3$(M=Mg,Sr) ceramics were investigated. In (P $b_{1-x}$ C $a_{x}$)Zr $O_3$ (X=0.33~0.40) ceramics, high quality factor and small temperature coefficient of resonant frequency were obtain in (P $b_{0.63}$C $a_{0.37}$)Zr $O_3$with perovskite structure. In the case of (P $b_{0.63}$C $a_{0.37-x}$M $g_{x}$)Zr $O_3$ dielectric constant temperature coefficient of resonant frequency increased and quality factor decreased due to increase of polarization of A-O bonding. When replacing Ca ion with Sr ion with large ion radius, polarization decreased with increased of bonding length and thus dielectric constant and temperature coefficient of resonant frequency decreased.decreased.creased.

• 한국결정성장학회지
• /
• 제21권2호
• /
• pp.70-74
• /
• 2011

다공성 $(Ca,Mg)_{0.15}Zr_{0.7}O_{1.7}$ 세라믹스를 제조하고 기공률 및 기계적 강도를 측정하여 SOFC 세라믹 지지체로서 응용 가능성을 조사하였다. 출발물질로 $ZrO(NO_3)_2{\cdot}2H_2O$를 선정하고 이를 이온 교환수에 용해하여 glycine을 첨가하여 glycine 연소법으로 $ZrO_2$ 분말을 합성하고 $800^{\circ}C$에서 하소하여 $ZrO_2$ 원으로 사용하였다. 합성한 $ZrO_2$ 분말, dolomite, 그리고 pore former로 carbon black을 혼합하고 $1200{\sim}1400^{\circ}C$로 소성하여 다공성 $(Ca,Mg)_{0.15}Zr_{0.7}O_{1.7}$ 세라믹스 소결체를 제조하였다. $(Ca,Mg)_{0.15}Zr_{0.7}O_{1.7}$ 세라믹스의 결정상은 단일상의 cubic상이었다. $1300^{\circ}C$ 에서 소성한 $(Ca,Mg)_{0.15}Zr_{0.7}O_{1.7}$ 세라믹 소결체는 carbon black의 양이 증가할수록 기공률이 32 %에서 55 %까지 증가하였으며 기계적 강도는 90 MPa로부터 30 MPa까지 감소하였다.

• 한국정밀공학회지
• /
• 제29권3호
• /
• pp.273-278
• /
• 2012

$ZrB_2$ has a melting temperature of $3245^{\circ}C$ and a low density of $6.1\;g/cm^3$, which makes this a candidate for application to ultra-high temperature over $2000^{\circ}C$. Beside these properties, $ZrB_2$ has excellent resistance to thermal shock and oxidation compared with other non-oxide engineering ceramics. This paper reviewed briefly 2 research examples, which are related to densification and properties of $ZrB_2$-based ceramics for ultra-high temperature applications. In the first section, the effect of $B_4C$ addition on the densification and properties of $ZrB_2$-based ceramics is shown. $ZrB_2$-20 vol.% SiC system was selected as a basic composition and $B_4C$ or C was added to this system in some extents. With sintered bodies, densification behavior and hightemperature (up to $1400^{\circ}C$) properties such as bending strength and hardness are examined. In the second section, the effect of the SiC size on the microstructures and physical properties is shown. $ZrB_2$-SiC ceramics are fabricated by using various SiC sources in order to investigate the grain-growth inhibition and the mechanical/thermal properties of $ZrB_2$-SiC.

• 한국세라믹학회지
• /
• 제28권5호
• /
• pp.422-428
• /
• 1991

The reaction sintering of Al2O3-ZrO2-Nb composite has been investigated using Al2O3, and ZrAl2 powders. Two kinds of specimens, 78.3Al2O3-14.0Nb2O5-7.7ZrAl2 in wt.% (AZN-5) and 72.3Al2O3-13.8Nb2O5-7.5ZrAl2-6.4ZrO2(AZN-10), were prepared. Powder compacts were sintered at various temperatures between 1$600^{\circ}C$ and 1$700^{\circ}C$ for 30 min in Ar. DTA and X-ray analysis have showen that a reaction between Nb2O5 and ZrAl2 started at 149$0^{\circ}C$ to form Al2O3, ZrO2, and Nb. The sintered density increased with the sintering temperature. AZN-10 specimen showed higher density than AZN-5 specimen for almost all the experimental conditions. Al2O3-ZrO2-Nb composite hot pressed after reaction sintering showed higher toughness and lower hardness than hot pressed Al2O3-ZrO2. The crack propagated through many metallic Nb particles which showed plastic deformation, and this is the cause of the increase in toughness of Al2O3-ZrO2-Nb composite over Al2O3-ZrO2.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1994년도 제2회 학술강연회논문집
• /
• pp.23-26
• /
• 1994

130mm D.B. 추진기관의 고온 시험에서 나타난 극심한 이상 연소 현상을 해결하기 위해 미세한 고체 입자들을 연소 가스에 분산시켜 불안정 연소를 억제하는 particulate damping 효과를 연구하였다. 고체 입자로서 효과적인 것으로 알려진 $K_2$$SO_4$. ZrC, Graphite를 CTPB, HTPB 고분자 물질에 충진시켜 epoxide, isocyanate 반응기와 가교 반응을 일으킴으로써 고무상의 탄성체 성질을 갖게 하는 $K_2$$SO_4$/CTPB, ZrC/Graphite/HTPB, ZrC/Graphite/AP/HTPB, ZrC/AP/HTPB 조성의 연소 안정제를 개발하였다. 이 연소 안정제는 외경 17mm, 길이 1000mm의 안정봉 형태로 제작하여 모타의 중심 cavity에 조립한 후 지상 연소 시험을 통하여 성능을 확인하였다. 시험 결과, 조성에 AP를 포함시켜 연소 안정제에 일정한 연소 속도를 부여하여 추진제 grain 연소 동안 고체 입자를 연소 가스에 분산되게 설계한 ZrC/Graphite/AP/HTPB, ZrC/AP/HTPB 조성의 연소 안정제가 불안정 연소 억제에 효과적인 것으로 나타났다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 춘계학술강연 및 발표대회강연 및 발표논문 초록집
• /
• pp.69-70
• /
• 2006

고주파 유도가열 연소합성법에 의해 2분 이내의 짧은 시간에 단일 공정으로 ZrC와 3Si의 혼합 분말로부터 $ZrSi_2-SiC$ 복합재료의 합성과 치밀화가 동시에 이루어졌다. 60MPa의 압력과 90%의 고주파 출력을 가하여 제조된 복합재료의 상대밀도는 약 97%였으며, $ZrSi_2$ 상과 SiC의 평균 결정립 크기는 약154nm와 78nm이었다. 비커스 경도계를 이용하여 측정된 $ZrSi_2-SiC$ 복합 재료의 경도와 파괴인성 값은 각각 $1180kg/mm^2$과 $2.5MPa{\cdot}m^{1/2}$ 이었다.

• 한국세라믹학회지
• /
• 제55권5호
• /
• pp.440-445
• /
• 2018

To control the electrical properties of a SiC heating element, we sintered $SiC-ZrB_2$composites by using the spark plasma sintering method. The addition of $ZrB_2$ particles with lower electrical conductivity to the SiC matrices with comparatively higher electrical resistivity lowers the electrical resistivities of the composite material. The $ZrB_2$ particles aggregate to form large particles and 3-1, 3-2, and 3-3 networks, i.e., conduction paths. In our study, about $1-{\mu}m$-sized $ZrB_2$ powders start to form the conduction path at about 10 vol.% of addition, namely the threshold volume. The Joule heating experiment shows that 20 vol.% $ZrB_2$-added SiC heating element has outstanding heating efficiency.

• 한국재료학회지
• /
• 제9권9호
• /
• pp.896-899
• /
• 1999

이산화탄소 기체센서를 Li$_2$ZrO$_2$계에서 온도와 $CO_2$농도의 함수로서 연구했다. Li$_2$ZrO$_3$를 열처리해서 합성했다. 시편은 직경 10mm, 두께 1mm의 벌크형과 알루미나 기판 위에 후막형으로 각각 제조했다. Li$_2$ZrO$_3$는 45$0^{\circ}C$에서 $650^{\circ}C$의 온도 범위에서 0.1%에서부터 100%까지 이산화탄소 농도 변화를 감지한다. 이산화탄소 감도는 측정온도와 연관성이 있다. Li$_2$ZrO$_3$는 45$0^{\circ}C$에서 $650^{\circ}C$의 온도 범위에서 $CO_2$와 반응해서 Li$_2$CO$_3$와 ZrO$_2$로 분해된다. $650^{\circ}C$ 이상에서 Li$_2$CO$_3$는 Li$_2$O와 $CO_2$로 재분해된다. Li$_2$ZrO$_3$센서의 재현성은 좋지 않았고, 동작온도는 55$0^{\circ}C$ 정도가 적당하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.191-193
• /
• 2004

The composites were fabricated, respectively, using 61vol.% SiC-39vol.% $TiB_2$ and using 61vol.% SiC-39vol.% $ZrB_2$ powders with the liquid forming additives of 12wt% $Al_2O_3+Y_2O_3$ by hot pressing annealing at $1650^{\circ}C$ for 4 hours. Reactions between SiC and transition metal $TiB_2$, $ZrB_2$ were not observed in this microstructure. The result of phase analysis of composites by XRD revealed SiC(6H, 3C), $TiB_2$, $ZrB_2$ and $YAG(Al_5Y_3O_{12})$ crystal phase on the SiC-$TiB_2$, and SiC-$ZrB_2$ composites. The ${\beta}\;{\alpha}$-SiC phase transformation was occurred on the $SiC-TiB_2$, $SiC-ZrB_2$ composites. The relative density, the flexural strength and Young's modulus showed respectively value of 98.57%, 226.06Mpa and $86.37{\times}10^3Mpa$ in SiC-$ZrB_2$ composites.