• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.6
• /
• pp.730-736
• /
• 2014

Test standards for electrical and electronic equipment required for ship operations is applying the IEC-60533 standard. However, although a test procedure and a specified regulation are clearly defined in the deck and bridge zone and general power distribution zone, they are not regulated in the special power distribution zone with ship propulsion system. For these reasons, the costs for additional research and development have been invested. In this paper, we was measured power noise in a special power distribution zone in ship and we were compared and analyzed values measured. The actual experiments are performed on the ship of Korea Maritime and Ocean University. As a result, the acquired data on Hanbada shows that loop antenna with low frequency band(160kHz) and ultra log antenna with high frequency band(1.97GHz)occur about 6-8dB differences and about 8.7 difference respectively. Also, the acquired data on Hannara shows that each loop antenna of 1MHz, 11MHz, and 25MHz occurs about 7dB difference about 4-5dB differences respectively. so standard of Special distribution zone must be specified by comparative analysis of data obtained by the experiment more.

• Journal of the Korean Society of Combustion
• /
• v.12 no.3
• /
• pp.24-32
• /
• 2007

A theoretical model was developed for rotary kiln and computational study was conducted to find the effect of feeding characteristics. One dimensional model with the variations of heating distribution, length of heating zone, excess air ratio and revolution was considered. The comparison of parallel-flow rotary kiln with that of counter-flow was conducted. For parallel-flow type, it is found that the variation of temperature of solid is not great for the zone that is following flame-heating zone. This zone is good to take the special treatment because thermal deviation is small and contacting time is enough for another treatment. Increase of excess air ratio have the effect of decreasing solid temperature. But this effect of decreasing solid temperature goes small for the great excess air ratio. The heating is efficient for the flame which has the maximum heating at the central region of the full length.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.374-381
• /
• 2002

Several sensor systems are used to estimate the reinforceing effect of pile in hihg cut slopes, and to find a failure zone in slopes effectively. Inclinometer, extensometer and V/W sensor have shown a great potentiality to serve real time health monitoring of the slope structures. They were embedded or attached to the structures, we conducted field tests and test results have shown great solutions for sensor systems of Civil Engineering Smart Structures. This research is to seek for the relationships among the slope movement and the reinforceing effect of pile, and the strain distribution in a active zone by analyzing the data from the in-situ measurement so that the possible failure zone should be well defined based on the relationships. Also, the relationships between temperature and reinforceing effect of pile, and the strain distribution are estimated in this paper.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.174-179
• /
• 2006

Information on the distribution characteristics of tuna resources in Kiribati EEZ waters in three zones (Zone 1: west Gilbert region, Zone 2: central Phoenix region, and Zone 3: east Line region) as well as their relationship with the ocean environment is critical for sustainable managing the migratory tuna resource and fishing practices in this region. Therefore, this study is designed to investigate the spatial and temporal distribution and concentration of bigeye (BET) and yellowfin tuna (YFT) in Kiribati EEZ waters in relation to sea surface temperature (SST) and thermocline depth so as to better understand the tuna resources management basis in Kiribati waters. The geographic and temporal distribution and concentration were first displayed. Paired t-test was utilized to compare the distribution between the two tuna species based on Catch per Unit Effort (CPUE) derived from the Korean longliners during 1996 to 2004, and also among the three zones of Kiribati EEZ waters. Environmental conditions of the three zones were then compared and correlated with the CPUE of YFT and BET. In addition, the effect of ENSO phenomena on the environmental conditions and the distribution of YFT and BET within the three zones were also examined. The BET was relatively higher in the Zone 3 whereas YFT predominate in the Zone 1 and the Zone 2 due to oceanographic differences among the three zones and the ecological habitats of the two tuna species. It was suggested that El Ni?o/Southern Oscillation (ENSO) phenomena altered the oceanographic conditions of the three zones that in turn change the distribution of the two tuna species. During El Ni?o, the warm phase of ENSO, resulted in having more BET in all the three zones and the opposite observed during La Ni?a (cold phase) replacing by having relatively higher catch rate for YFT, particularly in the Zone 2. Although the results of the study are from short periods (1996 to 2004) in considering oceanographic anomality, these environmental variations should be considered into sustainable fisheries management of tuna fisheries in Kiribati EEZ waters.

• Journal of Korean Society on Water Environment
• /
• v.36 no.1
• /
• pp.36-47
• /
• 2020

Three large scale weirs were constructed 2010 - 2011 in the Namhan river, Korea. The purpose of this study was to investigate the spatial distribution of benthic macroinvertebrates and the influence of environmental factors at the weirs 2014 - 2015. The number of species was higher in the riparian zone than in the transition or the limnetic zone. This seems to be because of the diversification of microhabitats and food sources according to the development of littoral zones. From the riparian zone to the limnetic zone, the individual abundance proportion of gathering collectors among functional feeding groups decreased, and that of filtering collectors increased. In the limnetic zone, sprawlers and climbers among habitat orientation groups decreased, and burrowers increased. This means that coarse particulate organic matter originated from land or riparian zone was transformed to fine particulate organic matter in the limnetic zone. Asian clam (Corbicula fluminea) and chironomids were dominant species based on individual abundance. Asian clam, a major taxon considering biomass, was abundant toward the limnetic zone. This is becasue of the shallow depth, suitable water current, slightly coarse substrate, and good water quality. There was no significant relationship between the water quality and the characteristics of the benthic macroinvertebrate community because the water quality was spatially not heterogenous. The more influential factors for benthic community were physical factors, especially water depth. Water depth showed a markedly significant correlation with Shannon-Weaver's species diversity (r=-0.90), Margalef's species richness (r=-0.82), and McNaughton's dominance (r=0.86). Water depth showed a positive correlation (r=0.68) with the Kong and Kim BMSI (Bentic Macroinverebrates Streambed Index), and this may be related to the coarse substrate of the limnetic zone.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.9 no.2
• /
• pp.49-55
• /
• 1972

The temperature distribution and cooling rate play an important role in the investigation of heat affected zone of weldment. All the problems such as metallurgical changes, welding thermal stress, welding residual stress and welding deformation in the heat affected zone of welded joint are due to the temperature distribution and cooling rate. In this paper, one dimensional temperature distribution and cooling rate due to transient arc welding heat in the heat affected zone of the base metal are studied. Heat transfer equation for one dimensional heat flow is formed, and solution is obtained. Weld heat input formula is also formed and used. Computed numerical results show a good agreement with the experimented temper color.

• Journal of Electrical Engineering and Technology
• /
• v.3 no.2
• /
• pp.192-198
• /
• 2008

This paper proposes a FRTU-based intelligent fault distance determination strategy in which each FRTU is able to avoid multiple estimations and reduce the level of estimation error by utilizing heuristic rules driven by voltage and current information collected by 1:1 communication with other FRTUs from the same zone in a ubiquitous-based distribution system. In the proposed method, each FRTU, at first, determines a fault zone and a fault path on the faulted zone based on the proposed heuristic rules which use its current data and the voltage data of its neighboring FRTUs as input data. Next, it determines the fault distance from its position based on the fault current estimated from the current data of the neighboring FRTUs. Finally, in order to prove the effectiveness of the proposed method, the diverse fault cases are simulated in several positions of the typical distribution system using the EMTP.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2038-2043
• /
• 2007

Analysis of the internal state of the blast furnace is needed to predict and control the operating condition. Especially, it is important to develop modeling of blast furnace for predicting cohesive zone because shape of cohesive zone influences on overall operating condition of blast furnace such as gas flow, temperature distribution and chemical reactions. Because many previous blast furnace models assumed cohesive zone to be fixed, they can't evaluate change of cohesive zone shape by operation condition such as PCR, blast condition and production rate. In this study, an axi-symmetric 2-dimensional steady state model is proposed to simulate blast furnace process using the general purpose-simulation code. And Porous media is assumed for the gas flow and the potential flow for the solid flow. Velocity, pressure and temperature distribution for gas and solid are displayed as the simulation results. The cohesive zones are figured in 3 different operating conditions.

• Korean Journal of Materials Research
• /
• v.3 no.1
• /
• pp.58-64
• /
• 1993

The degree of work hardening in the subsurface zones varied with the experimental conditions under the rolling contact fatigue wear test of high carbon Cr-Ti alloy steel was evaluated by the distribution of residual stresses. Surface residual stresses before the test did not affect the wear property. Surface residual stresses after the test decreased by the increase of contact stress and running. velocity. but the maximum compressive residual stress and its depth of saturation in the subsurface zone increased. The relationship between these experimental results and the distribution of the theoritical shear stress was also discussed.

• ALGAE
• /
• v.22 no.4
• /
• pp.313-318
• /
• 2007

Studies have been made of the species composition and community structure of benthic marine algae at intertidal zone and subtidal zone of Youngdo at Busan. In this area, a total of 69 marine algal species including 10 Chlorophyta, 17 Phaeophyta and 42 Rhodophyta was identified. Dominant species in coverage were Enteromorpha linza, Ulva pertusa, Gelidium divaricatum, Hildenbrandtia rubra and Chondrus ocellatus throughout the year. Enteromorpha linza, Ulva pertusa, Porphyra yezoensis, Gelidium divaricatum, Corallina pilulifera, Grateloupia elliptica and Chondrus ocellatus vertically distributed in intertidal zone, while Ecklonia stolonifera, Gelidium amansii, Prionitis cornea, Gracilaria textorii, Acrosorium polyneurum and Phycodrys fimbriata in subtidal zone. The vertical distribution of subtidal zone were characterized by Ecklonia stolonifera at 1 to 5 m depths. During a year, biomass and length of Ecklonia stolonifera gradually decreased from March to January, but increased from February. Zoosporangial sori were observed from September to December. In conclusion, number of species in this area was remarkably reduced as compared to the previous data at Busan and it’s vicinity.