• 제목/요약/키워드: ZnS: Cu

검색결과 1,084건 처리시간 0.026초

New Methods in the Technology of Electroluminescent Phosphors

  • Sychov, M.M.;Bahmet'ev, V.V.;Khavanova, L.V.;Kuznetsov, A.I.;Smimov, A.;Vasil'eva, I.V.;Mjakin, S.V.;Nakanishi, Y.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2003년도 International Meeting on Information Display
    • /
    • pp.1065-1070
    • /
    • 2003
  • Controlling synthesis conditions of ZnS:Cu,Al and ZnS:Cu electroluminescent phosphors we optimized particle size, color properties and efficiency. Surface properties were studied by new method and showed correlation with luminescence as shown by the analysis of EL spectra with Fok-Alentsev method. Luminance and maintenance improvement was achieved by the electron-beam annealing due to additional decomposition of $ZnS-Cu_{2}S$ solid solution and formation of centers of blue luminescence.

  • PDF

ZnS:Cu의 청색 전계 발광 특성과 안료 혼합 의존성 (Blue Electroluminescent Properties of ZnS:Cu and Dependence of Dye Addition)

  • 이종찬;박대희
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제51권1호
    • /
    • pp.1-4
    • /
    • 2002
  • To obtain the blue emission of powder electroluminescent device, the emission properties of ZnS:Cu were estimated by the variation of applied frequency and the addition of dye to ZnS:Cu phosphor. The variation of applied frequency was from 400 to 4kHz and the addition ratio of dye was from 0 to 5 weight percent respectively. The increment of applied frequency made that emission peaks were shifted from 500.5nm and 460nm at 400Hz to 490nm and 450nm at 4kHz. CIE coordinate system was shifted from x=0.1647, y=0.3711 at 400Hz to x=0.1543, y=0.1856 at 4kHz. On the basis of applied voltage 100V, 400Hz, the increment of addition ratio of dye also made that emission peak was shifted from 505nm(0wt%) to 490nm(5wt%) and the CIE coordinate system was shifted from x=0.1647, y=0.3711(0wt%) to x=0.1334, y=0.2363 (5wt%). The brightness was increased from 60 cd/$m^2$(400Hz) to 174 cd/$m^2$(4kHz) with increment of frequency. When the addition ratio of dye was above 1wt%, the brightness was decreased below 42% of initial brightness and changed from 60 cd/$m^2$(0wt%) to 20.84 cd/$m^2$(5wt%).

진공증발법을 이용한 CZTSe 광흡수층 박막 제조 및 태양전지 특성 분석

  • 정성훈;곽지혜;윤재호;안세진;조아라;안승규;신기식;윤경훈
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2011년도 춘계학술발표대회
    • /
    • pp.42.1-42.1
    • /
    • 2011
  • 높은 광흡수 계수를 갖는Cu(In,Ga) $Se_2$ (CIGS) 화합물 박막 소재는 고효율 태양전지 양산을 위해 가장 전도유망한 재료이나 상대적으로 매장량이 적은 In 및 Ga을 사용한다는 소재적 한계가 있다. $Cu_2ZnSnSe_4$ (CZTSe) 혹은 $Cu_2ZnSnS_4$(CZTS)와 같은 Cu-Zn-Sn-Se계 화합물 반도체는 CIGS 내 희소원소인 In과 Ga이 범용원소인 Zn 및 Sn으로 대체된 소재로써 미래형 저가 태양전지 개발을 위해 활발히 연구되고 있는데, 그 화합물 조합에 따라 0.8 eV부터 1.5 eV까지의 에너지 밴드갭을 갖는 것으로 알려져 있다. 스퍼터링법에 기반한 2단계 공정에 의해 3.2%의 CZTSe 및 6.7%의 CZTS 태양전지 효율 달성이 보고된 바 있으며, 최근 비진공 방식을 이용하여 제조된 $Cu_2ZnSn(S,Se)_4$ (CZTSSe) 태양전지가 9.6%의 변환효율을 생산하여 세계 최고기록을 갱신한 바 있다. 반면, 동시진공증발법에 의한 Cu-Zn-Sn-Se계 연구는 박막 조성 조절이 상대적으로 용이하다는 장점에도 불구하고, 상대적으로 공개된 연구결과의 양이 적으며 그 효율에 대한 보고는 특히 미미하다. 본 연구에서는 동시진공증발법에 의한 CZTSe 박막 연구 결과를 바탕으로 Sn 손실을 최소화하기 위한 진공증발 공정을 최적화하였으며, 이를 통해 CZTSe 박막 태양전지를 제조하고 그 특성분석을 통해 5% 이상의 변환효율을 달성하였다.

  • PDF

Hibiscus canabinas를 이용한 Cd, Cr, Cu, Ni 및 Zn의 제거 (Removal of Mixed Cd, Cr, Cu, Ni and Zn by Hibiscus canabinas)

  • 최문술;임철호
    • 환경생물
    • /
    • 제22권1호
    • /
    • pp.120-126
    • /
    • 2004
  • 수경 재배된 케냐프의 중금속 축적량 및 제거량을 파악하고 서로의 관계를 도출하기 위하여 Cd, Cu, Cr, Ni 및 Zn이 포함된 반응조에 노출시켰다. 대상식물의 최적성장을 위한 pH, DO, 전도도 및 영양염의 농도조절은 액체비료를 이용하여 조정하였다. 8일의 수리학적 체류시간을 적용했을 때 Cr, Cd, Cu, Ni 및 Zn의 제거율은 각각 90.5%, 80.5%, 66.1%, 71.1% 및 79.4%였고 그 농도는 각각 2.34에서 0.54 mg $L^{-1}$까지, 3.37에서 1.07 mg $L^{-1}$까지, 4.92에서 3.19 mg $L^{-1}$까지, 6.31에서 4.41 mg $L^{-1}$까지, 6.27에서 2.09 mg $L^{-1}$까지 줄었다. 특히 Cr, Cd, Cu, Ni 및 Zn의 축적율은 각각 원소별로 347.32 and 275.39, 157.52, 50.48 및 211.01 mg DW kg $L^{-1}d^{-1}$로 나타남으로써 본 연구의 결과 케냐프는 Cr, Cd과 Zn을 효율적으로 제거하는 식물임을 확인할 수 있었다. 최대제거율을 나타냈던 시점에서 Cr, Cd, Cu, Ni 및 Zn의 제거량에 대한 축적비율은 43.4%, 39.9%, 21.4%, 5.6% 및 14.5%로 나타났으며, 이와같은 생체내로의 축적과 더불어 rhizosphere에서나 잎을 통한 또 다른 기작에 의해 제거되는 것을 추정할 수 있으며 이는 밝혀야할 숙제로 대두되었다. 원소별로는 다른 원소에 비해 Cr, Cd및 Zn이 효율적으로 축적됨을 알 수 있었다.

ICP-MS와 AAS를 이용한 체내 혈청 Cu, Zn 분석에 관한 연구 (Analysis of Copper, Zinc in Serum Using ICP-MS & AAS)

  • 이예진;김동엽;이고은;조영숙
    • 대한임상검사과학회지
    • /
    • 제41권1호
    • /
    • pp.31-36
    • /
    • 2009
  • The exposure of human beings to toxic trace metals (Cu, Zn) continues to be an important public health issue and concern. This study was conducted to assess the exposure to trace metals (Cu, Zn) in the general Korean population by inductively coupled plasma mass spectrometry (ICP-MS) and Atomic absorption spectrometry (AAS). Serum samples were obtained from 40 healthy volunteers. Specimens were collected in special container and we applied sample processing to minimize contamination. We used ICP-MS and AAS to analyze simultaneously the concentration of metals including copper, zinc. Distribution of trace metal levels in the general healthy population showed lower values. The results in this study can provide background data for clinical studies associated with trace metal exposure in the korean population.

  • PDF

Synthesis of CuO/ZnO Nanoparticles and Their Application for Photocatalytic Degradation of Lidocaine HCl by the Trial-and-error and Taguchi Methods

  • Giahi, M.;Badalpoor, N.;Habibi, S.;Taghavi, H.
    • Bulletin of the Korean Chemical Society
    • /
    • 제34권7호
    • /
    • pp.2176-2182
    • /
    • 2013
  • A novel sol-gel method was implied to prepare CuO-doped ZnO nanoparticles. XRD and SEM techniques were used to characterize the CuO-doped ZnO sample. The photocatalytic degradation of Lidocaine HCl was investigated by two methods. The degradation was studied under different conditions such as the amount of photocatalyst, pH of the system, initial concentration, presence of electron acceptor, and presence of anions. The results showed that they strongly affected the photocatalytic degradation of Lidocaine HCl. The photodegradation efficiency of drug increased with the increase of the irradiation time. After 6 h irradiation with 400-W mercury lamp, about 93% removal of Lidocaine HCl was achieved. The degree of photodegradation obtained by Taguchi method compatible with the trial-and-error method showed reliable results.

市乳中의 Cu, Fe, Zn, Mn, Pb, Cd, 함량에 관한 연구 (A Study on the Content of Cu, Fe, Zn, Mn, Pb, Cd in Market Milk)

  • 김대선
    • 한국환경보건학회지
    • /
    • 제12권1호
    • /
    • pp.69-78
    • /
    • 1986
  • In order to determine the content levels of trace metals in cow's milk, 79 market milk samples were collected from markets in major cities of Korea from July to August, 1985 and analyzed for content levels of Cu, Fe, Zn, Mn, Pb, Cd. The Results were as follows Cu, average 43.5 $\mu$g/l range 14 ~ 172.7 $\mu$g/l Fe, average 398.4 $\mu$g/l range 35 ~ 1,873 $\mu$g/l Zn, average 2.917 mg/l range 1.233 ~ 7.46 mg/l Mn, average 26.74 $\mu$g/l range 7.6 ~ 102 $\mu$g/l Pb, average 33.9 $\mu$g/l range N.D. ~ 105 $\mu$g/l Cd, average 1.73 $\mu$g/l range N.D. ~ 5.4 $\mu$g/l

  • PDF

중금속 내성이 있는 Desulfovibrio desulfuricans를 이용한 해양 환경에서의 Cu(II), Zn(II) 제거 (Removal of Cupper(II), Zinc(II) in Marine Environment by Heavy Metal Resistant Desulfovibrio desulfuricans)

  • 주정옥;김인화;오병근
    • KSBB Journal
    • /
    • 제29권3호
    • /
    • pp.139-144
    • /
    • 2014
  • Microorganisms play a significant role in bioremediation of heavy metal contaminated seawater. In this study, we reported an effective removal of Cu and Zn in marine envionment by using Desulfovibrio desulfuricans (D. desulfuricans) which belong to sulfate reducing bacteria. D. desulfuricans showed stable growth characteristics in high salt concentration and had resistance to heavy metals. Cu and Zn was removed not only by physical adsorption on the surface of bacteria but also by precipitation reaction of microbial metabolism by D. desulfuricans in seawater. In case of different heavy metal concentration, Cu was effectively removed 85% at 25 ppm and 60% at 50 ppm and Zn was effectively removed 54% at 50 ppm and 46% at 200 ppm, respectively.

용액법을 이용한 나트륨 도핑에 따른 Cu2ZnSnSe4 (CZTSSe) 박막의 합성 및 특성 평가 (The Effects of Sodium Doping on the Electrical Properties of the Cu2ZnSn(S,Se)4 (CZTSSe) Solar Cells)

  • 심홍재;김지훈;강명길;김진혁
    • 한국재료학회지
    • /
    • 제28권10호
    • /
    • pp.564-569
    • /
    • 2018
  • $Cu_2ZnSn(S,Se)_4$ (CZTSSe) films were prepared on Mo coated soda lime glass substrates by sulfo-selenization of sputtered stacked Zn-Sn-Cu(CZT) precursor films. The precursor was dried in a capped state with aqueous NaOH solution. The CZT precursor films were sulfo-selenized in the S + Se vapor atmosphere. Sodium was doped during the sulfo-selenization treatment. The effect of sodium doping on the structural and electrical properties of the CZTSSe thin films were studied using FE-SEM(field-emission scanning electron microscopy), XRD(X-ray diffraction), XRF(X-ray fluorescence spectroscopy), dark current, SIMS(secondary ion mass spectrometry), conversion efficiency. The XRD, XRF, FE-SEM, Dark current, SIMS and cell efficiency results indicated that the properties of sulfo-selenized CZTSSe thin films were strongly related to the sodium doping. Further detailed analysis and discussion for effect of sodium doping on the properties CZTSSe thin films will be discussed.

MINERAL STATUS OF GRAZING PHILIPPINE GOATS II. THE NUTRITION OF SELENIUM, COPPER AND ZINC OF GOATS IN LUZON ISLAND

  • Fujihara, T.;Matsui, T.;Hayashi, S.;Robles, A.Y.;Serra, A.B.;Cruz, L.C.;Shimizu, H.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제5권2호
    • /
    • pp.389-395
    • /
    • 1992
  • Nutritional status of trace minerals (Se, Cu and Zn) in goats grazed on the native pasture was investigated during 2 years in Luzon Island, Republic of the Philippines. Three regions (South, Central and North) were objected to collect the samples of blood of goats and forages on the pasture. Se content of major species forages in the pasture was $24.7{\mu}g/kg$ DM, and was clearly lower than the value ($200{\mu}g/kg$ DM) required commonly for ruminant feed. The Cu and Zn contents of all forage samples ranged from 7.6 to 24.3 and 11.4 to 50.6 mg/kg DM, respectively, and these values almost exceeded the dietary level required for sheep. The blood Se levels in about 55% of goats grazed alone were under the normal range ($20{\mu}g/l$), but it in goats fed some concentrates as a supplement were almost within a normal ranges ($20-200{\mu}g/l$), though the Cu content of forages almost exceeded the dietary level required commonly. The 4-13% of plasma samples of goats without supplement showed the Zn level below the lower limit (0.6 mg/l) of normal range. The Zn deficiency was mostly improved by the addition of a small amount of concentrates. From these results, it will be necessary to study about unstable Cu status of grazed goats in Luzon Island regarding an interaction of Cu and other elements known to relate to the malabsorption of dietary Cu.