• 한국세라믹학회지
• /
• 제30권11호
• /
• pp.925-932
• /
• 1993

The perovskite phase in PZN-PMN-PT (Pb(Zn, Mg)1/3Nb2/3O3-PbTiO3) pseudoternary ceramics was stabilized by the addition of excess constituent divalent oxides (PbO, MgO and ZnO). The excess addition of 5mol% MgO or 7.5mol% PbO fully stabilized the perovskite phase. The enhanced diffuse phase transition (DPT) and the decrease in the electrical resistivity observed in the presence of excess ZnO or MgO were interpreted in terms of the additional formation of negatively charged, short-range ordered 1:1 domains with a concomitant generation of charge carriers, holes.

• Transactions on Electrical and Electronic Materials
• /
• 제13권5호
• /
• pp.262-265
• /
• 2012

The Microstructure and nonlinear electrical properties of the ZPCCYT (ZnO-$Pr_6O_{11}$-CoO-$Cr_2O_3$-$Y_2O_3$-$Tb_4O_7$) varistors were investigated for different amounts of $Tb_4O_7$. The addition of $Tb_4O_7$ has a significant effect on microstructure and electrical properties. Analysis of the microstructure indicated that the ceramics consisted of ZnO grain as a main phase and a few secondary phases as a mix of $Pr_6O_{11}$, $Y_2O_3$, and $Tb_4O_7$. As the amount of $Tb_4O_7$ increased, the sintered densities of pellets increased from $\rho$ = 5.70 to $5.78g/cm^3$ and the average grain size decreased from d = 4.8 to $3.6{\mu}m$. The increase in the amount of $Tb_4O_7$ increased from $E_B$ = 7,473 to 10,035 V/cm and from ${\alpha}$ = 39.7 to 52.2. In particular, it was found that the ceramics modified with 1.0 mol% in the amount of $Tb_4O_7$ are suited for the varistors for high voltage in the light of a high sintered density and a high voltage gradient.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1439-1442
• /
• 1997

We investigated the electrical and CO sensing properties of ZnO-$TiO_2$ composite ceramics. The electrical conductivities and relative dielectric constants of $TiO_2$ added ZnO increased with increasing $TiO_2$ content in air. The calculated dielectric constants of 3mol%, 5mol%, and 7mol% $TiO_2$ added ZnO were 7, 13, and 120, respectively. The measured CO sensivities were $1{\sim}6.42$ in the temperature range from $100^{\circ}C$ to $400^{\circ}C$.

• 한국전기전자재료학회논문지
• /
• 제15권10호
• /
• pp.876-882
• /
• 2002

The microstructure and electrical characteristics of ZPCD (ZnO-$Pr_{6}O_{11}$-CoO-$Dy_2O_3$) -based varistor ceramics were investigated with various $Pr_{6}O_{11}$/CoO ratios and sintering temperatures. The density of varistor ceramics with $Pr_{6}O_{11}$=1.0 was almost constant with sintering temperature, whereas it was increased noticeably in $Pr_{6}O_{11}$=0.5. Increasing $Pr_{6}O_{11}$ content enhanced the densification for any CoO content and the density was greatly affected not by CoO content but by $Pr_{6}O_{11}$ content. The varistor ceramics with $Pr_{6}O_{11}$/CoO=0.5/l.0 exhibited a higher nonlinearity than any other composition ratios. In particular, the varistor ceramics sintered at $1350^{\circ}C$ exhibited the best electrical properties, with nonlinear exponent of 37.8, leakage current of 7.6 ${\mu}$A, and tan $\delta$ of 0.059.

• 전기학회논문지
• /
• 제60권12호
• /
• pp.2270-2275
• /
• 2011

The sintering behavior and microwave properties of ferrite ($Ba_3Co_{2-2x}Zn_{2x}Fe_{24}O_{41}$ ceramics) were investigated for microwave applications. Also PIFA type antenna with ferrite was simulated. All samples were prepared by the solid state reaction method and sintered at $1350^{\circ}C$. All ceramics had relatively density above of 92% compare with theoretical density of $Ba_3Co_2Fe_{24}O_{41}$ ceramics. From the XRD pattens, the Z-type phase was existed as main phase in $Ba_3Co_{2-2x}Zn_{2x}Fe_{24}O_{41}$ ceramics. The permittivity and permeability of $Ba_3Co_{2-2x}Zn_{2x}Fe_{24}O_{41}$ ceramics were increased with Zn additions and decreased rapidly over frequency of 200~600 MHz. Several PIFA type antennas with ferrite and FR4 were simulated. All antenna structure had return loss of less than -10 dB at each resonant frequency. Simulated antenna using both ferrite and FR4 showed size reduction of 25% without a significant decrement of efficiency.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2004년도 춘계총회 및 연구발표회 초록집
• /
• pp.38.3-38.3
• /
• 2004

• 한국결정학회지
• /
• 제17권1호
• /
• pp.14-18
• /
• 2006

MOCVD 공정방법에 의해 수직정렬된 ZnO 나노선을 합성하고 공정조건 제어에 의해 합성되는 나노선의 물리적, 광학적 특성이 어떻게 변화하는지를 고찰하고자 하였다. 온도 및 산소분압제어 등의 공전변수 제어를 통하여 ZnO 나노 구조체는 나노선, 나노로드 뿐만 아니라 나노바늘 (nano-needle) 등 다양한 구조로 변화되었으며 그 직경 및 길이도 제어가 가능하였다. 전체적으로 양호한 특성의 wurzite 구조를 나타내었으며 기판에 수직인 방향으로 [0001] 방향으로 성장하였다. 광학특성에서는 나노선 직경이 작아질수록 주방출 피크의 천이현상이 관찰되었다.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1996년도 The 9th KACG Technical Annual Meeting and the 3rd Korea-Japan EMGS (Electronic Materials Growth Symposium)
• /
• pp.497-501
• /
• 1996

The ZnFe2O4 powder were prepared under glycothermal conditions by precipitation from metal nitrates with aqueous potassium hydroxide. Ultrafine particles of the ZnFe2O4 were obtained at temperatures as low as 225-300$^{\circ}C$. The microstructure and phase of the ZnFe2O4 powder was studied by SEM and XRD. The properties of the powder were studied as a function of various parameters (reaction temperature, reaction time, solid loading). The average particle diameter of the ZnFe2O4 increased with increasing reaction temperature. After glycothermal treatment at 270$^{\circ}C$ for 8hrs., the average particle diameter of the ZnFe2O4 was about 50 nm.

• 분석과학
• /
• 제5권3호
• /
• pp.327-332
• /
• 1992

Mn-Zn 페라이트 단결정 성장시 일반적인 Bridgman법에서 조성변동 문제가 발생한다. 상평형도를 이용하여 원료 조성을 A, B로 분리하여 조성 B 원료를 단결정 성장 속도와 동일하게 투입함으로써 조성변동 문제를 해결하였다. 실험변수를 바탕으로 A조성을 52 mol% $Fe_2O_3$, 30 mol% MnO, 18 mol% ZnO로 선정하였고, 원하는 단결정 조성인 B 조성을 53 mol% $Fe_2O_3$, 28.5 mol% MnO, 18.5 mol% ZnO로 선정하여 직경 60mm, 길이 300mm 단결정을 성장시켰다. 성장된 단결정은 조성 B 원료 정제가 투입된 30~270mm 부위에서 조성 변도 없이 균일하게 B 조성과 비슷한 조성을 가졌으며, 이에 따라 주파수 5 MHz에서의 투자율값도 균일하게 600 근처로 높게 나타났다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.320-321
• /
• 2005

The $ZnNb_2O_6$ ceramics with 5wt% CuO and 5wt% $B_2O_3$ were prepared by the conventional mixed oxide method. The ceramics were sintered at the temperature of $950^{\circ}C\sim1025^{\circ}C$ for 3hr. in air. The structural properties were investigated with sintering temperature by XRD and SEM. Also, the microwave dielectric properties were investigated with sintering temperature. Increasing the sintering temperature, the peak of second phase ($Cu_3Nb_2O_8$) was increased. But no significant difference was observed as sintering temperature. In the $ZnNb_2O_6$ ceramics with 5wt% CuO and 5wt% $B_2O_3$ sintered at $975^{\circ}C$ for 3hr, the dielectric constant, quality factor and temperature coefficient of the resonant frequency were 19.30, 14,662GHz, +4.1$8ppm/^{\circ}C$, respectively.