• 한국해양환경ㆍ에너지학회지
• /
• 제12권4호
• /
• pp.302-306
• /
• 2009

이 연구에 사용된 9종류의 나노입자는 직경 100 nm 이하의 크기를 가진 입자로, 알테미아 cyst가 nauplius로 부화되는 과정에서 어떠한 영향을 미치는지 살펴보았다. 24시간 경과 후 나노입자를 첨가하지 않은 대조구에서는 82%가 nauplius로 부화하였다. 20 mg/L 농도에서는 AGZ020, Nano silver, P-25, Sb, 및 SnO 나노입자가 각각 18%, 20%, 13%, 50% 및 0%의 부화율을 보여 유해성이 큰 것으로 나타났으나, Ag-$TiO_2$, In, Sn, 및 Zn 나노입자에서는 각각 75%, 60%, 73% 및 73%로 대조구에 비해 유해성을 가졌지만, AGZ020, Nano silver, P-25, Sb, 및 SnO 나노입자에 비해 상대적으로 미약한 것으로 나타났다. 이는 나노입자가 가지고 있는 성분에 따라서 차이가 났다. AGZ020, Nano silver 및 P-25 나노입자는 은(Ag)이 2% 함유되어 항균제로서 널리 사용되어지고 있으며, 산소를 결합시킨 SnO 나노입자는 광촉매제로 사용되고 있다. 이들 나노입자들은 현재 가전, 기능성 화장품, 항균제 및 광촉매제 등 사용이 일반화되어 수중환경으로 유입될 가능성이 높아지고 있다. 이에 따라 수중생태계에 점차 영향을 줄 가능성이 높기에, 나노입자가 가지는 잠재적 위험성을 지속적으로 연구해야 할 것이다.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2008년도 춘계학술발표회
• /
• pp.137-141
• /
• 2008

이 연구에 사용된 9종류의 나노입자는 직경 100nm 이하의 크기를 가진 입자로, 알테미아 cyst가 nauplius로 부화되는 과정에서 어떠한 영향을 미치는지 살펴보았다. 24시간 경과 후 나노입자를 첨가하지 않은 대조구에서는 82%가 nauplius의 부화하였다. 20mg/L 농도에서는 AGZ020, Nano silver, P-25, Sb, 및 SnO 나노입자가 각각 18%, 20%, 13%, 50% 및 0%의 부화율을 보여 유해성이 큰 것으로 나타났으나, Ag-$TiO_2$, In, Sn, 및 Zn 나노입자에서는 각각 75%, 60%, 73% 및 73%로 대조구에 비해 유해성을 가졌지만, AGZ020, Nano silver, P-25, Sb, 및 SnO 나노입자에 비해 상대적으로 미약한 것으로 나타났다. 이는 나노입자가 가지고 있는 성분에 따라서 차이가 났다. AGZ020, Nano silver 및 P-25 나노입자는 은(Ag)이 2% 함유되어 항균제로서 널리 사용되어지고 있으며, 산소를 결합시킨 SnO 나노입자는 광촉매제로 사용되고 있다. 이들 나노입자들은 현재 가전, 기능성 화장품, 항균제 및 광촉매제 등 사용이 일반화되어 수중환경으로 유입될 가능성이 높아지고 있다. 이에 따라 수중생태계에 전파 영향을 준 가능성이 높기에, 나노입자가 가지는 잠재적 위험성을 지속적으로 연구해야 할 것이다.

• 한국재료학회지
• /
• 제24권9호
• /
• pp.458-464
• /
• 2014

Light scattering enhancement is widely used to enhance the optical absorption efficiency of dye-sensitized solar cells. In this work, we systematically analyzed the effects of spherical voids distributed as light-scattering centers in photoanode films made of an assembly of zinc oxide nanoparticles. Spherical voids in electrode films were formed using a sacrificial template of polystyrene (PS) spheres. The diameter and volume concentration of these spheres was varied to optimize the efficiency of dye-sensitized solar cells. The effects of film thickness on this efficiency was also examined. Electrochemical impedance spectroscopy was performed to study electron transport in the electrodes. The highest power conversion efficiency of 4.07 % was observed with $12{\mu}m$ film thickness. This relatively low optimum thickness of the electrode film is due to the enhanced light absorption caused by the light scattering centers of voids distributed in the film.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.45.2-45.2
• /
• 2011

Metal organic frameworks (MOF) have generated considerable interests as a potential candidate for hydrogen storage owing to their extremely high surface-to-volume ratio and low density. In this study, Pt nanoparticles of about 3 nm in size were introduced outside MOF-5 [$Zn_4O$(1,4-benzenedicarbocylate)3], which was then encapsulated with hydrophobic microporous carbon black (denoted CB@Pt/MOF-5) in order to enhance hydrogen uptake capacity without decreasing the specific surface area and hydrostability. To study the chemical composition, morphology, crystal information, and properties of the synthesized material, a variety of techniques is employed, including WXRD, XPS, ICP-AES, FE-SEM, HR-TEM, and N2 adsorption-desorption, confirming the formation of novel hybrid composite designated CB@Pt/MOF-5 with highly crystalline structure, large specific surface area and pore volume. In addition, $H_2$ storage capacity for resulting material was measured using magnetic suspension microbalance at 77 and 298 K under high-pressure condition, and the hydrostability was also tested by exposing the sample to 33% relative humidity at $23^{\circ}C$ and measuring XRD as a function of time.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.369.1-369.1
• /
• 2014

Au-functionalized $WO_3$ nanotubes were synthesized using ZnO nanowire templates. Transmission electron microscopy revealed the Au nanoparticles on the outer surface of a typical $WO_3$ nanotube ranged from 5 to 25 nm. The multiple networked Au-functionalized $WO_3$ nanotube sensors showed responses of 820-3, 924% in the $NO_2$ concentration range of 1-5 ppm at $300^{\circ}C$. These responses were approximately 5-12 fold higher than those observed for pristine $WO_3$ nanotube sensors over the same $NO_2$ concentration range. A model describing the gas sensing mechanism of Au-functionalized $WO_3$ nanotubes is discussed.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.27.2-27.2
• /
• 2010

In recent years, there is a strong requirement of low cost, stable microelectro mechanical systems (MEMS) for resonators, microswitches and sensors. Most of these devices consist of freely suspended microcantilevers, which are usually made by the etching of some sacrificial materials. Herein, we have attempted to use Si nanowires, inherited from the parent Si wafer, as a sacrificial material due to its porosity, low cost and ease of fabrication. Prior to the fabrication of the Si nanowires silver nanoparticles were continuously formed on the surface of Si wafer. Vertically aligned Si nanowires were fabricated from the parent Si wafers by aqueous chemical route at $50^{\circ}C$. Afterwards, the morphological and structural characteristics of the Si nanowires were investigated. The morphology of nanowires was strongly modulated by the resistivity of the parent wafer. The 3-step etching of nanowires in diluted KOH solution was carried out at room temperature in order to control the fast etching. A layer of $Si_3N_4$ (300 nm) was used for the selective fabrication of nanowires. Finally, a freely suspended bridge of zinc oxide (ZnO) was fabricated after the removal of nanowires from the parent wafer. At present, we believe that this technique may provide a platform for the inexpensive fabrication of futuristic MEMS.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.222-224
• /
• 2006

A non-vacuum process for $Cu(In,Ga)Se_2$ (CIGS) thin film solar cells from nanoparticle precursors was described in this work CIGS nanoparticle precursors was prepared by a low temperature colloidal route by reacting the starting materials $(CuI,\;InI_3,\;GaI_3\;and\;Na_2Se)$ in organic solvents, by which fine CIGS nanoparticles of about 20nm in diameter were obtained. The nanoparticle precursors were mixed with organic binder material for the rheology of the mixture to be adjusted for the doctor blade method. After depositing the mixture of CIGS with binder on Mo/glass substrate, the samples were preheated on the hot plate in air to evaporate remaining solvents ud to burn the organic binder material. Subsequently, the resultant (porous) CIGS/Mo/glass simple was selenized in a two-zone Rapid Thermal Process (RTP) furnace in order to get a solar ceil applicable dense CIGS absorber layer. Complete solar cell structure was obtained by depositing. The other layers including CdS buffer layer, ZnO window layer and Al electrodes by conventional methods. The resultant solar cell showed a conversion efficiency of 0.5%.

• Nuclear Engineering and Technology
• /
• 제55권5호
• /
• pp.1519-1526
• /
• 2023

For the first time Aluminium-BariumeZinc oxide nanocomposite (ZABONC) was synthesized by solution combustion method where calcination was carried out at low temperatures (600℃) to study the electromagnetic (EM) (X/γ) radiation shielding properties. Further for characterization purpose standard techniques like PXRD, SEM, UV-VISIBLE, FTIR were used to find phase purity, functional groups, surface morphology, and to do structural analysis and energy band gap determination. The PXRD pattern shows (hkl) planes corresponding to spinel cubic phase of ZnAl₂O4, cubic Ba(NO₃)₂, α and γ phase of Al₂O₃ which clearly confirms the formation of complex nano composite. From SEM histogram mean size of nano particles was calculated and is in the order of 17 nm. Wood and Tauc's relation direct energy band gap calculation gives energy gap of 2.9 eV. In addition, EM (X/γ) shielding properties were measured and compared with the theoretical ones using standard procedures (NaI (Tl) detector and multi channel analyzer MCA). For energy above 356 keV the measured shielding parameters agree well with the theory, while below this value slight deviation is observed, due to the influence of atomic/crystallite size of the ZABONC. Hence synthesized ZABONC can be used as a shielding material in EM (X/γ) radiation shielding.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.312-312
• /
• 2012

Magnesium oxide has become focus for research activities due to its use in magnetic tunnel junctions and for understanding of do ferromagnetism. Theoretical investigations on such type of system indicate that the presence of defects greater than a threshold value is responsible for the magnetic behaviour. It has also been shown experimentally that by decreasing the film thickness and size of nanoparticles, enhancement/increase in magnetization can be achieved. Apart from the change in dimension, swift heavy ions (SHI) are well known for creating defects and modifying the properties of the materials. In the present work, we have studied the irradiation induced effects in magnesium oxide thin film deposited on quartz substrate via X-ray absorption spectroscopy (XAS). Magnesium oxide thin films of thickness 50nm were deposited on quartz substrate by using e-beam evaporation method. These films were irradiated by 200 MeV Ag15+ ion beam at fluence of $1{\times}10^{11}$, $5{\times}10^{11}$, $1{\times}10^{12}$, $3{\times}10^{12}$ and $5{\times}10^{12}ions/cm^2$ at Nuclear Science Centre, IUAC, New Delhi (India). The grain size was observed (as studied by AFM) to be decreased from 37 nm (pristine film) to 23 nm ($1{\times}10^{12}ions/cm^2$) and thereafter it increases upto a fluence of $5{\times}10^{12}ions/cm^2$. The electronic structure of the system has been investigated by X-ray absorption spectroscopy (XAS) measurements performed at the high energy spherical grating monochromator 20A1 XAS (HSGM) beamline in the National Synchrotron Radiation Research Center (NSRRC), Taiwan. Oxides of light elements like MgO/ZnO possess many unique physical properties with potentials for novel application in various fields. These irradiated thin films are also studied with different polarization (left and right circularly polarized) of incident x-ray beam at 05B3 EPU- Soft x-ray scattering beamline of NSRRC. The detailed analysis of observed results in the wake of existing theories is discussed.

• 공업화학
• /
• 제23권3호
• /
• pp.271-278
• /
• 2012

본 연구에서는 마이카와 산화 아연을 이용하여 복합 재료를 제조하고, 이를 자외선 차단 크림에 응용하는 연구를 수행하였다. 먼저 마이카와 산화 아연을 각각 3-aminopropyltrimethoxysilane (APTMS)으로 처리하여 표면에 아민기를 생성시켰다. 아민기가 붙은 마이카를 1,4-phenylenediisothiocyanate (PDC)와 반응시켜 표면에 -N=C=S 작용기를 활성화시킨 후, 아민기가 붙어있는 산화 아연과 결합시켜 산화 아연으로 덮인 마이카 복합 재료를 합성하였다. 원소 분석, EDS 분석, 열 중량 분석, SEM 이미지 분석, 형광 이미지 분석, 제타 전위 측정, X-선 회절 분석, DRS UV/Vis 분석을 통하여 고체 생성물의 특성을 규명하였다. 최종적으로 표준 프로토콜로 제조된 자외선 차단 크림의 파장에 따른 투과도를 280~400 nm 범위에서 측정하여 자외선 차단 효과를 확인하였다.