• 한국결정성장학회지
• /
• 제16권2호
• /
• pp.59-65
• /
• 2006

Al이 첨가된 ZnO(ZnO : Al) 박막과 F이 첨가된 ZnO(ZnO : F) 박막을 sol-gel 법을 이용하여 glass 기판위에 코팅하였다. 공통적으로 (002)면의 c-축 배향성을 보였지만 I(002)/[I(002) + I(101)]와 FWHM(full width at half-maximum) 값은 차이를 보였다. 특히 입자크기에 있어서는 ZnO : Al 박막에서 첨가농도가 증가함에 따라 입자크기가 감소한 반면 ZnO : F 박막에서는 F 3 at%까지 입자크기가 증가하다가 그 이후로 다시 감소하는 경향을 보였다. 진기적 성질의 측정을 위해서 Hall effect measurement를 이용하였는데 ZnO : Al 박막의 경우 Al 1 at%에서 비저항이 $2.9{\times}10^{-2}{\Omega}cm$ 이었고 ZnO : F에서는 F 3 at%에서 $3.3{\times}10^{-1}{\Omega}cm$의 값을 보였다. 또한 ZnO : F 박막은 ZnO : Al 박막에 비해서 캐리어 농도는 낮았지만(ZnO : Al $4.8{\times}10^{18}cm^{-3}$, ZnO : F $3.9{\times}10^{16}cm^{-3}$) 이동도에 있어서 상당히 큰 값(ZnO : Al $45cm^2/Vs$ ZnO:F $495cm^2/Vs$)을 보였다. 가시광선 영역에서의 평균 광투과도에 있어서는 ZnO : Al 박막에서 $86{\sim}90%$의 값을 보였지만 ZnO : F에서는 $77{\sim}85%$로 상대적으로 낮은 광투과도를 나타내었다.

• 한국진공학회지
• /
• 제19권5호
• /
• pp.385-390
• /
• 2010

원자층 증착법(Atomic Layer Deposition, ALD)을 이용하여 ZnO 나노막대에 ZnO:Al과 $Al_2O_3$를 코팅하여 coaxial 형태의 나노선 구조를 제작하여 광학적 특성을 분석하였다. 반도체인 ZnO:Al을 코팅하는 경우 Al이 ZnO층에 확산되어 ZnO에 도핑이 되는 효과를, $Al_2O_3$를 코팅하는 경우 반도체-절연체 계면 상태가 존재함을 광전이 특성을 이용하여 확인하였다.

• 전기전자학회논문지
• /
• 제24권2호
• /
• pp.435-440
• /
• 2020

고주파 마그네트론 스퍼터링으로~500 nm 두께의 ZnO:Al막을 증착하였다. 증착된 ZnO:Al막을 100 ℃, 200 ℃, 300 ℃ 및 400 ℃에서 10시간 동안 열처리하였다. ZnO:Al막의 열처리에 따른 저항률, 캐리어 농도 및 이동도 변화를 측정하였다. XRD, FESEM 결과를 통해 열처리에 따른 ZnO:Al막의 저항률 변화 원인을 조사하였다. ZnO:Al막의 광 투과율을 측정한 후 에너지 밴드 갭, Urbach 에너지 및 굴절률을 도출하였다. ZnO:Al막의 전기적 특성 변화를 광특성과 연관지어 설명하였다.

• 한국세라믹학회지
• /
• 제32권1호
• /
• pp.106-112
• /
• 1995

In order to examine the effect of CuO and Al2O3 addition on the electrical conductivity of ZnO, both Al2O3 (0, 1, 2, 5, 10at.%) and CuO (1, 5at.%) were added to ZnO. Al2O3 addition (~2at.% Al) increased the total electrical conductivity of ZnO which was already decreased by CuO doping effect Above solid solubility of Al (~2at.%), ZnAl2O4 formed and the total electrical conductivity decreased due to the decrease of sintered density. Impedance measurements were used to know the reason and degree of contribution of three resistive elements, ZnO grain, ZnO/CuO, and ZnO/ZnO grain boundaries, to the total electrical conductivity changed.

• 한국세라믹학회지
• /
• 제37권4호
• /
• pp.314-319
• /
• 2000

Microstructueral development and electrical properties in ZnO-Bi2O3-ZnAl2O4 system were investigated with ZnAl2O4 content(0.1~1.0 mol%). The shrinakge of specimens started around $700^{\circ}C$ and finished at 110$0^{\circ}C$, reaching a maximum shrinkage rate at 80$0^{\circ}C$. The shrinkage rate is strongly related to the fromation of a Bi-rich liquid. The increase of the ZnAl2O4 content inhibited the grain growth of ZnO. Most of ZnAl2O4 particles located at the grain boundaries were about 2~3${\mu}{\textrm}{m}$. ZnO grain size changed little up to 110$0^{\circ}C$, but increased markedly above 115$0^{\circ}C$, especially at lower ZnAl2O4 content. Drastic decreasing in breakdown voltage(Vb) with increasing temperature is expected to be dependent on the ZnO grain size and the distribution of the largest grains between the electrode. The nonlinear I-V characteristic was significantly influenced by the ZnAl2O4 content, which exhibited a maximum value at about 15${\mu}{\textrm}{m}$ of ZnO grain size.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.106-106
• /
• 2009

Al-doped ZnO (AZO) thin films were grown on glass substrates by co-sputtering at room temperature. We made ZnO and Al target and ZnO:Al film is deposited with sputter which has two RF gun source. The Al content was controlled by varying Al RF power and effect of Al contents on the properties of ZnO:Al film was investigated. Crystallinity and orientation of the ZnO:Al films were investigated by X-ray diffraction (XRD), surface morphology of the ZnO:Al films was observed by atomic force microscope. Electrical properties of the ZnO:Al films were measured at room temperature by van der Pauw method and hall measurement. Optrical properties of ZnO:Al films were measured by UV-vis-NIR spectrometer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.265-265
• /
• 2007

In the present work, we have studied low temperature sintering and microwave dielectric properties of $ZnAl_2O_4$-zinc borosilicate (ZBS, 65ZnO-$25B_2O_3-10SiO_2$) glass composites. The focus of this paper was on the improvement of sinterability, low dielectric constant, and on the theoretical proof regarding of microwave dielectric properties in $ZnAl_2O_4$-ZBS glass composites, respectively. The $ZnAl_2O_4$ with 60 vo1% ZBS glass ensured successful sintering below $900^{\circ}C$. It is considered that the non-reactive liquid phase sintering (NPLS) occurred. In addition, $ZnAl_2O_4$ was observed in the $ZnAl_2O_4$-(x)ZBS composites, indicating that there were no reactions between $ZnAl_2O_4$ and ZBS glass. $ZnB_2O_4\;and\;Zn_2SiO_4$ with the willemite structure as the secondary phase was observed in the all $ZnAl_2O_4$-(x)ZBScomposites. In terms of dielectric properties, the application of the $ZnAl_2O_4$-(x)ZBS composites sintered at $900^{\circ}C$ to LTCC substrate were shown to be appropriate; $ZnAl_2O_4$-60ZBS (${\varepsilon}_r$= 6.7, $Q{\times}f$ value= 13,000 GHz, ${\tau}_f$= -30 ppm/$^{\circ}C$). Also, in this work was possible theoretical proof regarding of microwave dielectric properties in $ZnAl_2O_4$-(x)ZBS composites.

• 한국세라믹학회지
• /
• 제33권2호
• /
• pp.149-154
• /
• 1996

ZnO and Al-doped ZnO thin films were prepared by sol-gel dip-coating method and electrical and optical properties of films were investigated. Using the zinc acetate dihydrate and acetylaceton(AcAc) as a chelating agent stable ZnO sol was synthesized with HCl catalyst. Adding aluminium chloride to the ZnO sol Al-doped ZnO sol could be also synthesized. As Al contents increase the crystallinity of ZnO thin film was retarded by increased compressive stress in the film resulted from the difference of ionic radius between Zn2+ and Al3+ The thickness of ZnO and Al-doped ZnO thin film was in the range of 2100~2350$\AA$. The resistivity of ZnO thin films was measured by Van der Pauw method. ZnO and Al-doped ZnO thin films with annealing temperature and Al content had the resistivity of 0.78~1.65$\Omega$cm and ZnO and Al-doped ZnO thin film post-annealed at 40$0^{\circ}C$ in vacuum(5$\times$10-5 torr) showed the resistivity of 2.28$\times$10-2$\Omega$cm. And the trans-mittance of ZnO and Al-doped ZnO thin film is in the range of 91-97% in visible range.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.37-40
• /
• 2003

Amorphous $Al_2O_3$ nanotubes have been fabricated by utilizing the ZnO nanowires as template with wet etching method. ZnO nanowires synthesized by thermal evaporation are conformally coated with $Al_2O_3$ by atomic-layer deposition(ALD) method. The $Al_2O_3$-coated ZnO nanowires are of core-shell structure; ZnO core nanowires and $Al_2O_3$ shells. When the $ZnO/Al_2O_3$ core-shell structure is dipped in $H_3PO_4$ solution at $25^{\circ}C$ for a 6 min, the core ZnO materials are completely etched, and only $Al_2O_3$ nanotubes are remained. This nanotube fabrication is technically easier than others, and simply approachable. Transmission electron microscopy shows that the $Al_2O_3$ nanotubes have various thicknesses that can be controlled.

• 한국세라믹학회지
• /
• 제38권12호
• /
• pp.1093-1096
• /
• 2001

ZnO내 $Al_2$ $O_3$의 고용은 $Al^{3+}$ 의 ZnO 결정의 $Zn^{2+}$자리, 즉 wurtizite 구조에서 4개의 산소가 만드는 4면체 공간자리로서 치환반응으로 정의될 수 있다. 이 반응은 아연-빈자리 혹은 산소-빈자리와 연관되어 일어나므로 ZnO의 비화학량론성 및 결정결함반응들과 상관관계를 가진다. 이러한 상호연관성은 아연-빈자리 및 산소분압(P $o_2$) 의존성을 낳으며, 결과적으로 ZnO내 Al 용해도([Al/sug zn/]$_{max}$)의 산소분압 의존성을 야기한다. 본 논문은 ZnO내에 Al의 용해도는 산소분압이 증가하면 감소한다는 것을 처음으로 곗나하여 보고한다. [A $l_{zn}$ ]$_{max}$ $P_{o2}$$^{-1}$4/./.