• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.20-20
• /
• 2007

Nanowire-based field-effect transistors (FETs) decorated with nanoparticles have been greatly paid attention as nonvolatile memory devices of next generation due to their excellent transportation ability of charge carriers in the channel and outstanding capability of charge trapping in the floating gate. In this work, top-gate single ZnO nanowire-based FETs with and without Au nanoparticles were fabricated and their memory effects were characterized. Using thermal evaporation and rapid thermal annealing processes, Au nanoparticles were formed on an $Al_2O_3$ layer which was semi cylindrically coated on a single ZnO nanowire. The family of $I_{DS}-V_{GS}$ curves for the double sweep of the gate voltage at $V_{DS}$ = 1 V was obtained. The device decorated with nanoparticles shows giant hysterisis loops with ${\Delta}V_{th}$ = 2 V, indicating a significant charge storage effect. Note that the hysterisis loops are clockwise which result from the tunneling of the charge carriers from the nanowire into the nanoparticles. On the other hand, the device without nanoparticles shows a negligible countclockwise hysterisis loop which reveals that the influence of oxide trap charges or mobile ions is negligible. Therefore, the charge storage effect mainly comes from the nanoparticles decorated on the nanowire, which obviously demonstrates that the top-gate single ZnO nanowire-based FETs decorated with Au nanoparticles are the good candidate for the application in the nonvolatile memory devices of next generation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2005.08a
• /
• pp.135-135
• /
• 2005

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2006.05a
• /
• pp.38.1-38.1
• /
• 2006

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.243-244
• /
• 2012

산화아연 나노구조를 금을 금속촉매로 사용하여 실리콘 기판위에 기상이동법으로 성장하였다. 성장할 때 소스(source)와 기판 사이의 거리는 5에서 50 mm로 변화를 주며 아르곤과 산소 분위기에서 $900^{\circ}C$로 성장하였다. 산화아연 나노구조의 구조적 및 광학적 특성을 조사하기 위해 field-emission scanning electron microscopy, X-ray diffraction (XRD), 그리고 photoluminescence (PL)를 이용하였다. 산화아연 나노구조는 나노선과 나노입자의 형태로 성장하였다. 산화아연 나노구조의 광학적 특성은 소스와 기판사이의 거리가 가까울수록 향상되었다. 특히, 소스와 기판사이의 거리가 5 mm 일 때, 산화아연 나노선이 관찰되었으며 XRD 와 PL 분석에서 나타난 반가폭 (full width at half maximum)은 $0.061^{\circ}$ 와 96 meV로써 가장 작았다. 산화아연 나노선은 산화아연 나노입자와 비교하여, 결정성 및 광학적 특성이 우수하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.3-3
• /
• 2008

21 세기 제 3의 산업혁명을 가져올 것으로 기대되는 나노기술(NT), 정보기술(IT), 바이오기술(BT)은 전 세계 과학자들의 마음을 사로잡고 있다. 이 가운데 나노기술은 전자산업에 응용시 그 기대효과는 우리가 상상하는 이상의 것이라 예상하고 있다. 나노기술에 특히 관심을 가지는 이유는 물질이 마이크로미터 크기로 작아져도 벌크 물질의 물리적 특성이 그대로 유지되지만, 나노미터 크기가 되면서 우리가 경험하지 못했던 새로운 물리적 특성들이 발현되기 때문이다. 그 특성에는 양자구속효과, Hall-Petch 효과, 자기효과 등이 있다. 나노기술의 구현은 양자점과 같은 영차원 나노입자, 나노와이어, 나노막대, 나노리본 등과 같은 직경이 100nm 이하의 일차원 구조의 나노물질 및 나노박막과 기타 100nm 이하의 나노구조물들이 사용된다. 현재 일차원 구조를 이용한 전자디바이스화 연구는 결정성장을 정확하게 조절하는 합성기술 합성된 일차원 나노물질의 물리적 특성을 지배하는 각종 파라미터들과 물리적 특성들과의 상관관계 정립, 나노와이어를 이용한 Bottom-up 방식에 의한 조립기술 확보를 위해 활발히 진행 중이다. 하지만 나노구조의 특성을 확인하는 형태의 연구일 뿐, 실제 디바이스화에는 여전히 많은 과제를 안고 있다. 본 연구에서는 산화아연을 기반으로 한 고품위 능동형 산화물 나노구조의 다양한 성장방법 및 물성 평가에 대해 연구하였다. 성장장비로는 MOCVD와 스퍼터링을 이용하여 대면적 균일 성장을 이룰 수 있었다. 특히 실제 광전소자에 응용요구에 알맞은 Bottom-up 방식에 의한 수직성장 기술, 길이/직경 비 향상 기술, 결정성 향상 기술, 저온성장 기술, Dimension 조절 기술 Interfacial layer 제거 기술 등을 중점적으로 연구하였다. Dimension 조절 기술로 p-Si 기판위에 성장된 나노 LED에서는 밝은 emission을 관찰하였으며, 세계에서 최초로 스퍼터링을 이용하여 4인치 웨이퍼에 대면적 수직 성장하였다. 최근에는 선택적 삼원계 씨앗층을 이용한 길이/직경 비가 매우 향상된 MgZnO 나노와이어를 Interfacial layer 없이 수직으로 성장하여 산화물 전계방출 에미터로서의 가능성을 확인하였다.

• Journal of Surface Science and Engineering
• /
• v.50 no.3
• /
• pp.212-218
• /
• 2017

$Mg_xNi_yZn_{1-x-y}Fe_2O_4$ ferrite powders were prepared by self-propagating high temperature synthesis followed by classifying with an ultrasonic wet-magnetic separation unit to get high pure nano-sized particles. The $Mg_xNi_yZn_{1-x-y}Fe_2O_4$ ferrites were well formed by using several powders like iron, nickel oxide, zinc oxide and magnesium oxide at 0.1 MPa of oxygen pressure. The ultrasonic wet-magnetic separation of pre-mechanical milled ferrite powders resulted in producing the powders with average size of 800 nm. The addition of a surfactant during the wet-magnetic separation process improved productivity more than twice. The coercive force, maximum magnetization and residual magnetization of the $Mg_xNi_yZn_{1-x-y}Fe_2O_4$ nano-powders with 800 nm size were 3651 A/m, $53.92Am^2/kg$ and $4.0Am^2/kg$, respectively.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.201.2-201.2
• /
• 2016

$Mg_xNi_yZn_{1-x-y}Fe_2O_4$ ferrite powders were prepared by self-propagating high temperature synthesis followed by classified by ultrasonic wet-magnetic separation method to get nano-sized particles with high purity. The $Mg_xNi_yZn_{1-x-y}Fe_2O_4$ ferrites were well formed by using several powders like iron, nickel oxide, zinc oxide and magnesium oxide at 0.1 MPa of oxygen pressure. The ultrasonic wet-magnetic separation of pre-mechanical milled ferrite powders produced the powders with average size of $3.7-0.8{\mu}m$. The addition of a surfactant during the separation process improved productivity more than twice. The coercive force, maximum magnetization and residual magnetization of the $Mg_xNi_yZn_{1-x-y}Fe_2O_4$ nano-powders with 810 nm size were 45.89 Oe, 53.92 emu/gOe, 0.4 emu/Oe, respectively.

• Economic and Environmental Geology
• /
• v.48 no.3
• /
• pp.261-271
• /
• 2015

Toxicity results of metals, nanoparticles (NPs), and soils contaminated with metals were introduced on this review. Following methods were used: seed germination, bioluminescence, enzyme activity, and mutation. In general, different sensitivities were observed, depending on types of bioassays and pollutants. Among tested seeds, sensitivities of Lactucus and Raphanus were greater than others. Of single metal exposure, effect by As(III) was greater than others, and high revertant mutation ratio (5.1) was observed at 1 mg/L arsenite, indicating high mutagenicity. No general pattern was observed on the effect of metal mixture, but synergistic effect was observed with seeds. In case of soils, no correlation was observed between total metal contents and toxicity. Toxicity of NPs was observed as follows: CuO > ZnO > NiO > $TiO_2$, $Fe_2O_3$, $Co_3O_4$. Especially, no considerable effects were observed by $TiO_2$, $Fe_2O_3$, and $Co_3O_4$ under tested concentration (max. 1,000 mg/L). The evaluation results of interactive toxic effects using various bioassays may comprise a useful tool for the bioassessment of various environmental pollutants.

• Journal of the Korean Ceramic Society
• /
• v.40 no.1
• /
• pp.31-36
• /
• 2003

In this study, nano-sized NiCuZn-ferrites for the multi-layered chip inductor application were prepared by a coprecipitation method and its electromagnetic properties were analyzed. Also, the property of low temperature sintering were studied with the initial heat treatment of powder.$(Ni_{0.4-x}Cu_xZn_{0.60})_{1+w}(Fe_2O_4)_{1-w}$ (x=0.2, w=0.03) were calcined at $300^{circ}C~750^{circ}C.$ The sintered NiCuZn-ferrites at $900^{\circ}C$ showed good apparent density $4.90g/cm^3,$ and magnetic properties of initial permeability 164 and quality factor 72. As the calcination temperature increase, the grain size of NiCuZn-ferrite increased with irregular grain distribution and its magnetic properties were deteriorated.

• Journal of the Korean Geosynthetics Society
• /
• v.22 no.4
• /
• pp.51-61
• /
• 2023

In this study, in order to improve the fire resistance performance of structures in case of fire in buildings and structures, PVA fibers and the ZnO particles combined with mesoporous nano silica (MSNs) were mixed with cement mortar, and the specimen was exposed to a temperature range of 20~1100℃. Then the residual compressive strength and weight change rate were measured to determine whether the fire resistance performance changed. As a result of the study, it was found that mixing mesoporous nano silica and PVA fiber together did not contribute to improving the fire resistance performance of cement mortar. On the other hand, mixing 0.5% of mesoporous nano silica and 0.1 vol% of PVA fiber showed the best improvement test results, showing that it was advantageous for fire resistance performance.