• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.426-426
• /
• 2011

최근 들어 금속물질을 나노미터 단위로 구성할 수 있는 기술이 진보하면서, 금속 나노입자에 의해 발생되는 표면 플라즈몬에 대해서도 다양한 분야의 관심이 집중되고 있다. 유전체 물질을 기지상으로 하는 금속:유전체 나노복합체에서 금속 나노입자는 자유전자들의 집단 진동인 국소표면 플라즈몬 공진(Localized Surface Plasmon Resonance, LSPR)현상에 의해 국부전기장을 증대 시키고, 가시광 및 적외선 영역에서 특성 광흡수 거동을 보인다. 이와 같은 광학적 특성은 금속 나노입자들의 크기, 형태, 그리고 나노입자들의 주변을 구성하는 기지상 물질의 종류에 의해 조절된다. 금속:유전체 나노복합체에 나타나는 이러한 특성은 단순장식코팅 뿐만 아니라 광의 효율적 운용과 광을 매개로 한 기능발현을 필요로 하는 디스플레이, 광학 스위칭 소재 및 태양전지의 효율 향상을 위한 광흡수층 등 매우 다양한 응용이 가능하다. 본 연구에서는 다양한 굴절률을 갖는 재료들 중, 저굴절률을 갖는 SiO2와 고굴절률을 갖는 ZnS-SiO2를 기지상 재료로 선택하여 교번증착 스퍼터링법으로 Ag와 Au입자를 형성시켰다. Ag를 금속나노입자로 갖고, SiO2와 ZnS-SiO2를 기지상으로 하는 금속:유전체 나노복합체에서는 금속나노입자 형성에 따른 뚜렷한 표면 플라즈몬 공진 광흡수 피크가 관찰된 반면 Au나노입자는 기지상에 따라 각기 다른 광흡수 특성을 나타냈는데, SiO2기지상에서 명확한 광흡수 피크를 형성했던 경우와는 달리 ZnS-SiO2기지상에서는 특정파장에서의 흡수피크로 규정되기 어려운 넓은 파장범위에 걸친 완만한 광흡수 피크를 나타냈다. TEM 분석을 통해, ZnS-SiO2 기지상 내의 Au입자는 각각 독립되어 있는 Island형태가 아닌 유전체 기지상과 대칭적으로 혼합된 네트워크 형태의 Bruggeman 기하구조를 구성하고 있음을 확인하였고, 이는 Au입자가 형성되고 성장할 때 Au와 S의 높은 결합에너지로 인해 상당한 젖음 특성을 갖고 성장하였기 때문으로 판단됐다. 따라서 나노복합체를 구성하는 물질간의 광학적 특성뿐만 아니라 기지상 내에서의 금속입자의 성장거동에 대한 연구가 수반되었을 때, 금속:유전체 나노복합체의 표면 플라즈몬 공진 광흡수 특성을 보다 정확하게 제어할 수 있다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.202.1-202.1
• /
• 2013

ZnO nanostructure was fabricated on a Si substrate using two-step growth. The seed layer was grown on the Si substrate by a sol-gel spin-coating. In the first step, ZnO nanorods were grown by a hydrothermal method at $140^{\circ}C$ for 5 min. In the second step, a ZnO thin film was grown on the ZnO nanorods by spin-coating. After growth, these films were annealed at $800^{\circ}C$ for 10 min. Electrical and optical properties of ZnO nanostructures have modified by plasma-assisted molecular beam epitaxy (PA-MBE) regrowth. The carrier concentration and resistivity increased by PA-MBE regrowth. In the photoluminescence, the full width at half maximum and intensity were decreased and increased, respectively, by PA-MBE regrowth.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.304.1-304.1
• /
• 2014

Flat-panel displays have been growing as an essential everyday product in the current information/communication ages in the unprecedented speed. The forward-coming applications require light-weightness, higher speed, higher resolution, and lower power consumption, along with the relevant cost. Such specifications demand for a new concept-based materials and applications, unlike Si-based technologies, such as amorphous Si and polycrystalline Si thin film transistors. Since the introduction of the first concept on the oxide-based thin film transistors by Hosono et al., amorphous oxide thin film transistors have been gaining academic/industrial interest, owing to the facile synthesis and reproducible processing despite of a couple of shortcomings. The current work places its main emphasis on the binary oxides composed of ZnO and SnO2. RF sputtering was applied to the fabrication of amorphous oxide thin film devices, in the form of bottom-gated structures involving highly-doped Si wafers as gate materials and thermal oxide (SiO2) as gate dielectrics. The physical/chemical features were characterized using atomic force microscopy for surface morphology, spectroscopic ellipsometry for optical parameters, X-ray diffraction for crystallinity, and X-ray photoelectron spectroscopy for identification of chemical states. The combined characterizations on Zn-Sn-O thin films are discussed in comparison with the device performance based on thin film transistors involving Zn-Sn-O thin films as channel materials, with the aim to optimizing high-performance thin film transistors.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.423-423
• /
• 2007

In this study, the effects of annealing conditions on the structural and optical properties of ZnO films were investigated. ZnO oxide (ZnO) films were deposited onto $SiO_2$/Si substrates by RF magnetron sputtering from a ZnO target. The substrate was not heated during deposition. ZnO films were annealed in temperature ranges of $500{\sim}650^{\circ}C$ in the $O_2$ flow for 5 ~ 20 min. The film average thicknesses were in the range of 291 nm. The surface morphologies and structures of the samples were characterized by SEM and XRD, respectively. The optical properties were evaluated by PL measurement at room temperature using a He-Cd 325 nm laser. According to the results, the optimal annealing conditions for the best photoluminescence (PL) characteristics were found to be oxygen fraction, ($O_2/O_2+Ar$) of 20%, RF power of 240W, substrate temperature of RT (room temperature), annealing condition of $600^{\circ}C$ for 20 min, and sputtering pressure of 20 mTorr. The obtained wavelength of light emission was found at 379 nm (ultraviolet-UV region). However, the optimal parameters for the best PL characteristics of ZnO thin films were not consistent with those obtained from the (002) intensities of XRD analyses. As a result, XRD pattern was not considered as the key issue concerning the intensity of PL of ZnO thin film. The intensity of the emitted UV light will correspond to the grain size of ZnO film.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.1
• /
• pp.19-24
• /
• 2007

The effects of $B_2O_3-SiO_2-R(R;CaO,\;BaO,\;ZnO,\;Bi_2O_3)$ borosilicate glass system on the sintering behavior and microwave dielectric properties of ceramic/glass composites were investigated as functions of modifier, glass addition ($30{\sim}50\;vol%$) and sintering temperature ($500{\sim}900^{\circ}C$ for 2 hrs). The addition of 50 and 45 vol% glass ensured successful sintering below $900^{\circ}C$. Sintering characteristics of the composites were well described in terms of modifier. Borosilicate glass enhanced the reaction with $Al_{2}O_{3}$ to form pores, second phases and liquid phases, which was responsible to component of modifier. Dielectric constant (${\varepsilon}_{r},\;Q{\times}f_{o}$) and temperature coefficient of resonant frequency (${\tau}_{f}$) of the composite with 50 and 45 vol% glass contents($B_{2}O_{3}:SiO_{2}:R=25:10:65$) demonstrated A-CaBS(7.8, 2,560 GHz, -81ppm/$^{\circ}C$), A-BaBs(5.8, 3.130 GHz, -64 ppm/$^{\circ}C$), A-ZnBS(5.7, 17,800 GHz, -21 ppm/$^{\circ}C$), A-BiBs(45 vol% glass in total)(8.3, 2,700 GHz, -45 ppm/$^{\circ}C$) which is applicable to substrate requiring an low dielectric properties.

• Journal of the Korean Vacuum Society
• /
• v.18 no.4
• /
• pp.296-301
• /
• 2009

An inductively coupled plasma assisted atomic layer deposition(ICP-ALD) system has been constructed for the deposition of ZnO thin films, and various experiments of ZnO thin films on p-type Si(100) substrates have been carried out to find the self-limiting reaction conditions for the ICP-ALD system under non-plasma circumstances. Diethyl zinc[$Zn(C_2H_5)_2$, DEZn] was used as the zinc precursor, $H_2O$ as the oxidant, and Ar as the carrier and purge gas. At the substrate temperature of $150^{\circ}C$, atomic layer deposition conditions based on self-limiting surface reaction were successfully obtained by series of experiments through the variation of exposure times for DEZn, $H_2O$, and Ar. ZnO deposition was repeated at different substrate temperatures of $90{\sim}210^{\circ}C$. As a result, the thermal process window(ALD window) for ZnO thin films was observed to be $110{\sim}190^{\circ}C$ and the average growth rate was measured to be constant of 0.29 nm/cycle. Properties of the film's microstructure and composition(Zn, O, etc.) were also studied. As the substrate temperature increases, the crystallinity was improved and ZnO(002) peak became dominant. The films deposited at all temperatures were high purity, and the films deposited at high temperatures had the composition ratio between Zn and O closer to one of a stable hexagonal wurtzite structure.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.107-107
• /
• 2010

ZnO는 상온에서 에너지 밴드갭이 3.37 eV 이고 엑시톤 속박에너지가 60 meV 인 넓은 에너지 띠를 가진 반도체이다. ZnO 반도체는 고에너지 영역에서 광투과율 및 에너지 수집율이 큰 특성을 가지고 있기 때문에 단파장 영역에서 작동하는 발광 다이오드나 반도체레이저 소자 응용에 사용되고 있다. 이와 더불어 액정디스플레이, 유기발광소자 및 태양전지에서 투명 산화물 전극으로 많은 응용이 되고 있다. 본 연구에서는 p-type Si 기판 위에 ZnO 나노입자 형성과 구조적 성질과 전자적 성질에 대하여 조사하였다. ZnO 나노입자를 형성하기 위해 ethanol에 zinc acetate dehydrate (5 wt%)을 적절히 분산시킨 $Zn(CH_3COO)_2H_2O\;+\;CH_3OH$ 용액을 스핀 코팅하여 산소 분위기에서 각각 $300^{\circ}C$, $500^{\circ}C$, $700^{\circ}C$ 및 $900^{\circ}C$로 각각 2시간 동안 열처리 하였다. X-ray 회절 실험 결과는 열처리 온도에 관계없이 ZnO (0001)의 피크가 관측되었다. 원자힘 현미경 이미지상으로 열처리 온도에 따른 ZnO 나노입자의 표면상태의 변화와 나노입자의 크기의 변화를 확인하였다. X-ray 광전자 분광 스펙트럼 결과는 Zn $2p_{3/2}$와 O 1s의 전자상태 스펙트럼을 분석하여 ZnO 나노입자가 형성됨을 보여주었다. 본 연구를 통하여 용액방법을 사용하여 제작된 ZnO 나노입자의 열처리 온도변화에 따른 구조적 성질과 전자적 성질을 이해하는데 도움을 줄 것이다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.97-98
• /
• 2008

n-ZnO/p-Si heterostructure is a good candidate for ZnO-based heterojunction light emitting diodes(LED) because of its competitive price and lower driving voltage. However, the conventional LED shows much lower extraction efficiency, because it has small top contact and large backside contact. In this structure, the injected current from the top contact enters the active region underneath the top contact. Thus, the emitted light is hindered by the opaque top contact. This problem can be solved by using a current-blocking layer(CBL) that prevents the current injection into the active region below the top contact.

• Journal of the Korean Ceramic Society
• /
• v.34 no.5
• /
• pp.483-490
• /
• 1997

Al2O3/metal composites were fabricated by oxidation and reaction of molten Al-alloy into two types of commercial Al2O3-SiO2 fibrous insulation board. The growth rate, composition and microstructure of these materials were described. An AlZnMg(7075) alloy was selected as a parent alloy. Mixed polycrystalline fiber and glass phase fiber were used as a filler. The growth surface of an alloy was covered with and without SiO2. SiO2 powder was employed as a surface dopant to aid initial oxidation of Al-alloy. Al-alloy, SiO2, fiber block and growth inhibitor CaSiO3 were packed sequentially in a alumina crucible and oxidized in air at temperature range 90$0^{\circ}C$ to 120$0^{\circ}C$. The growth rate of composite layer was calculated by measuring the mass increasement(g) per unit surface($\textrm{cm}^2$). XRD and optical microscope were used to investigate the composition and phase of composites. The composite grown at 120$0^{\circ}C$ and with SiO2 dopant showed rapid growth rate. The growth behavior differed a little depending on the types of fiber used. The composites consist of $\alpha$-Al2O3, Al, Si and pore. The composite grown at 100$0^{\circ}C$ exhibited better microstructure compared to that grown at 120$0^{\circ}C$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.319-320
• /
• 2009

In this study, high-quality Al-N doped p-type ZnO thin films were deposited on n-type Si (100) wafer or Si coated with buffer layer by DC magnetron sputtering in the mixture of $N_2$ and $O_2$ gas. The target was ceramic ZnO mixed with $Al_2O_3$ (2 wt%). The p-type ZnO thin film showed higher carrier concentration $2.93\times10^{17}cm^{-3}$, lower resistivity of $5.349\;{\Omega}cm$ and mobility of $3.99\;cm^2V^{-1}S^{-1}$, respectively. According to PL spectrum, the Al donor energy level depth ($E_d$) of Al-N codoped p-type ZnO film was reduced to about 51 meV, and the N acceptor energy level depth ($E_a$) was reduced to 63 meV, respectively.