• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.44-44
• /
• 2011

Unipolar 구조의 양자점 발광소자는 소자에 주입되는 전자로 구동 가능하게 설계되어 bipolar 구조와 달리 직류뿐만 아니라 교류로도 구동이 가능하다. 소자의 구조는 패턴된 ITO 유리기판 위에 Radio frequency magnetron sputter로 성장시킨 투명한 금속산화층 사이에 콜로이드로 분산된 양자점이 포함되어 있다. 본 연구에서는, 전하 수송층으로 사용되는 Zinc Tin Oxide (ZTO)가 전압 인가 시 발생하는 과부하로 인해 낮은 전계발광(electroluminescence, EL)특성이 나타나는 문제점이 있다. 이를 해결하고자 ZTO층의 비저항과 EL특성 사이의 관계를 알아보고, ZTO의 비저항 값을 변화시키기 위해 sputter 공정 중 인가 전력과 작업압력, 산소 분압 등의 성장 조건을 변화시켰다. ZTO의 조성비에 따른 비저항 및 전기적 특성을 홀 측정 장비로 측정하였다. 인가전력이 낮고 작업압력이 낮을수록 비저항 값이 낮았으며, 그에 따라 소자의 동작전압이 낮아지고 EL특성 또한 우수하게 나타났다.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2008.11a
• /
• pp.297-299
• /
• 2008

시화호 주변 해역에 서식하는 진주담치 내의 위생세균 및 비소(As), 카드뮴(Cd), 크롬(Cr), 철(Fe), 수은(Hg), 망간(Mn), 니켈(Ni), 납(Pb), 셀렌니움(Se) 및 아연(Zn)등의 미량원소들을 분석한 결과를 요약하면 다음과 같다. 본 연구해역의 전 조사정점에서 위생세균이 다소 높은 농도를 보이는 것은 아마도 조사시기가 하계로써 담수유입에 따른 영향으로 보여진다. 미량금속의 농도는 우리나라 식품위생기준 이내의 양호한 농도분포를 보였으며, 비소(As), 크롬(Cr), 니켈(Ni) 및 납의 경우 시화호 및 시화호 외측해역에서 유의한 농도차이(p<0.05)를 나타내지 않았으나 카드뮴 및 망간의 농도의 경우 시화호내에서 다소 높은 농도를 보였다(p<0.05). 반면에 구리, 수은, 셀렌니움 및 아연 등의 농도는 시화호에서 보다 시화호 외측해역에서 다소 높은 농도를 보였다(p<0.05). 또한 각성분간에 상관관계를 살펴보면 비필수원소중 수은과 카드물의 경우 셀레니움과 좋은 정의 상관성를 보이는 것으로 보아 이들 비필수원소의 셀레니움이 진주담치의 황산화성물질로 작용하는 것으로 보여 진다.

• Environmental Analysis Health and Toxicology
• /
• v.14 no.4
• /
• pp.155-163
• /
• 1999

Heavy metal accumulation in living organisms through food-wed can give serious damage on physiological responses for vital activities. The initiation of heavy metal supposed to begin from the bio-accumulation of plants. To establish basic data fur heavy metal contents in plants at the area without artificial contamination, both woody and herb plants at Mt. Kwang-Duk were studied. The content of heavy metals in various organs of plants were analyzed by ICP. The range of heavy metals in plants for Al, As, Cd, Co, Cr, Cu, Fe. Mn, Pb, Se and Zn were 1.019∼257.200ppm, O∼2.929ppm, 0∼0.079ppm, 0∼0.054ppm, 0.023∼3.007ppm, 0∼1.997ppm, 2.031∼148.500ppm, 1.069∼51.320ppm, O∼126.900ppm, 0.708∼4.927ppm and 0.846∼4.949ppm, respectively. The amount of heavy metals in plants are much less than that of soil except some species. In woody plants, it was detected that the metal contents of leaves were higher than that of stems especially in case of Al and Fe with statistical significance. There were significant differences between shoots and roots of herb plants in metal content of Al, Co and Fe. Those metals have more accumulated in roots comparing with shoots. Some species of plants had shown the difference tendency of heavy metal accumulation. Generally, most species had not exceeded over twice of mean value each other, and had various difference according to the kinds of heavy metals.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.244.2-244.2
• /
• 2011

We introduce a novel and robust method for the preparation of nanocomposite multilayers, which allows the excellent photoluminescent (PL) properties as well as the accurate control over the composition and dimensions of multilayers. By exchanging the oleic acid stabilizers of CdSe@ZnS quantum dots (QDs) synthesized in organic solvent with 2-bromo-2-methylpropionic acid (BMPA) in the same solvent, these nanoparticles were be alternately deposited by nucleophilic substitution reaction with highly branched poly(amidoamine) dendrimer (PAMA) through layer-by-layer (LbL) assembly process. Our approach does not need to be transformed into the water-dispersible nanoparticles with electrostatic or hydrogen-bonding groups, which can deteriorate their inherent properties, for the built-up of multilayers. The nanocomposite multilayers including QDs exhibited the strong PL properties achieving densely packed surface coverage as well as long-term PL stability under atmospheric conditions in comparison with those of conventional LbL multilayers based on electrostatic interaction. Furthermore, we demonstrate that the flexible multilayer films with optical properties can be easily prepared using nucleophilic substitution reaction between bromo and amino groups in organic media. This robust and tailored method opens a new route for the design of functional film devices based on nanocomposite multilayers.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.593-593
• /
• 2012

CIGS 박막 태양전지는 일반적으로 soda-lime glass(SLG)를 기판으로 사용하여 SLG/Mo/CIGS/CdS/ZnO/ITO/Grid의 구조로 제작된다. 하지만 SLG를 기판으로 사용할 경우, 유리의 특성상 무게가 무겁고, 유연성이 없기 때문에 건축물 적용에 적합하지 않다. 이러한 문제점을 극복하기 위해 가볍고 유연한 금속 및 폴리이미드 기판을 이용한 CIGS 태양전지가 널리 연구되고 있다. 그러나, 폴리이미드 기판의 경우, 특성이 우수한 CIGS 박막을 얻기 위한 고온 공정을 사용할 수 없기 때문에 이에 대한 고려가 필요하다. 본 논문에서는 CIGS 박막 태양전지 제작을 위한 폴리이미드 기판의 특성과 그 위에 형성한 후면 전극의 특성을 논의하고자 한다. 4종류의 폴리이미드 기판에 대한 열 특성을 시차주사열량계(differential scanning calorimeter)와 열중량분석기(thermogravimetric analysis), 열기계분석기(thermo mechanical anaylsis)를 이용해 분석하였다. 또한 Mo 후면 전극을 DC-sputter를 이용해 형성한 후, XRD와 AFM, 4-point probe를 이용하여 결정성 및 표면 거칠기, 면저항을 분석하였다. 결정성과 거칠기는 SLG에 증착했을 때와 동일한 결과를 보였으며, 면저항은 폴리이미드 필름에 증착 할 경우 더 크게 측정되었다. 본 연구는 중소기업청 산연기술개발사업(SL122689) 및 과학기술연합대학원대학교(UST)의 지원을 받아 수행된 "공동연구 지원사업"의 연구결과입니다.

• Journal of the Mineralogical Society of Korea
• /
• v.24 no.3
• /
• pp.245-252
• /
• 2011

콜롬비아는 안데스 산맥의 북단에 위치하며 NS 방향의 단층대를 기준으로 지질 환경의 차이가 크다. 단층대를 기준으로 동부지역은 원생대 변성암류와 이를 피복하는 고생대 변성퇴적암류가 주로 분포하며, 서부 지역은 고생대 퇴적암류, 중생대 화성암류, 제 3 기 화산양류 및 퇴적암류가 주로 분포한다. 지화학이상대는 6개 그룹으로 분류되며, 철 (Fe), 귀금속(Au, Ag, Pt), 기초금속(Cu, Pb, Zn), 희유금속(Sn, Cr, Co, Mn, Mo, Ni, Nb, W, V, Mg, Ti, Be, REE, Ga, Zr, Hf, Se, Te, Ta, Cd, In, Li 등) 빛 핵원료자원인 U 이상대로 구성된다. 콜롬비아의 주요 부존자원은 석탄, 니켈, 금 및 에메랄드이다. 에메랄드, 석탄 및 니켈은 세계적인 매장규모와 생산량을 보인다. 콜롬비아는 탐사가 거의 수행되지 않은 지역이 전 국토의 49%에 달해 광물부존 잠재성은 현재보다 크게 높을 것으로 보인다. 따라서 최근 콜롬비아와의 광물자원 협력이 강화되고 있는 시점에서 미탐사 지역을 대상한 공동탐사를 지화학 이상대가 확인된 지역을 중심으로 수행하여 신규광체를 확보하고, 광물자원 협력을 강화함으로써 공동개발 여건을 마련할 필요가 있다고 판단된다.

• Journal of Environmental Health Sciences
• /
• v.18 no.1
• /
• pp.95-104
• /
• 1992

The influence of selenium to several toxic effects of cadmum, including lethality has been shown following pretreatment with cadmium, zinc and seleniurm Five groups of rats, each consisting of 16 rats, were studied and each group was divided into four subgroups, 4 rats for each subgroup. After subcutaneous pretreatment during 5 days with saline, CdCl$_{2}$ (0.5mg/kg, ZnCl$_{2}$ (13.0mg/kg) and $Na_{2}SeO_{3}$(1.0mg/kg), rats were given intraperitioneal administration of various dosage of or cadium of cadmium and selenium. After giving the challenge dose, cadmium and metallothionein(MT) concentrations were determined in liver and kidney The concentration of cadmium in liver and kideny increased proportionally to the increase of challenge dosage. The simultaneous administration of cadmium and selenium significantly more decrease cadmium concentrations in liver and kidney than those of the administration of cadmium only. However, MT concentrations in liver and kideny were increased by the pretreatment of cacmium, zinc and selenium. Our results suggest that increasing cadmium concentrations, gradully accumulating in the tissues of liver and kidney as a result of the pretreatment, served to induced the synthesis of MT, thus making them resistant to the challenge from cadmium.

• Advances in Energy Research
• /
• v.1 no.2
• /
• pp.117-126
• /
• 2013

In this paper, core-shell semiconductor quantum dots (QDs) CdSeS/ZnS with emission at 490 nm and 450 nm were investigated for their use in luminescent down-shifting (LDS) layers. Luminescent quantum yield (LQY) of the QDs measurements in solution proposed that they were suitable candidates for inclusion in LDS layers. QDs were encapsulated in poly(methyl,methacrylate) (PMMA) polymer matrix and films were fabricated of $134{\pm}0.05$ microns. Selections of organic dyes from BASF Lumogen F range were also investigated for their use as LDS layers; Violet 570 and Yellow 083. The addition of LDS layers containing Violet 570 dye demonstrated a unity LQY when encapsulated within a PMMA matrix. A PV device of an LDS layer of Lumogen Violet 570 deposited on top of a crystalline silicon cell was fabricated where it was demonstrated to increase the efficiency of the cell by 34.5% relative.

• Environmental Engineering Research
• /
• v.18 no.1
• /
• pp.3-8
• /
• 2013

Collision cell technology-inductively coupled plasma-mass spectrometry (CCT-ICP-MS) was used to measure the concentrations of approximately 19 elements associated with airborne PM2.5 samples that were collected from a roadside sampling station in Daejeon, Korea. Standard reference material (SRM 2783, air particulate on filter media) of the National Institute of Standards and Technology was used for the quality assurance of CCT-ICP-MS. The elemental concentrations were compared statistically with the certified (or recommended) values. The patterns of distribution were clearly distinguished between elements with their concentrations ranging over four orders of magnitude. If compared in terms of enrichment factors, it was found that toxic trace elements (e.g., Sb, Se, Cd, As, Zn, Pb, and Cu) of anthropogenic origin are much more enriched in PM2.5 samples of the study site. To the contrary, the results of the correlation analysis showed that PM2.5 concentrations can exhibit more enhanced correlations with the elements (e.g., Fe, K, Si, and Ti) arising from earth's crust. The findings of strong correlations between PM2.5 and the elements of crustal origin may be directly comparable with the dominant role of those species by constituting a major fraction of even PM2.5 as well as PM10 at the roadside area.

• Journal of Korean Society for Atmospheric Environment
• /
• v.28 no.1
• /
• pp.39-51
• /
• 2012

Aerosol slurry samples were collected in 60-min interval using Korean Semi-continuous Elements in Aerosol Sampler (KSEAS) between May 19 and June 6, 2010 at an urban site of Gwangju. The $PM_{2.5}$ samples were collected with a flow rate of 16.7 L/min and particles are grown by condensation of water vapor in a condenser maintained at ${\sim}5^{\circ}C$ after saturation by direct injection of steam. The resulting droplets are collected in a liquid slurry with a airdroplet separator. Concentrations of 16 elements (Al, Fe, Mn, Ca, K, Cu, Zn, Pb, Cd, Cr, Ti, V, Ni, Co, As, Se) in the collected slurry samples were determined off-line by ICP-MS. KSEAS sample analysis encompassed the sampling periods for which 24-hr average elemental species concentrations were calculated for comparison with those derived from 24-hr integrated filter samples. Relationship between elemental species measured by two methods indicated high correlation coefficients (r), mostly greater than r of 0.80. However, we note that concentrations of Al, K, Ca, Mn, and Fe, which are often associated with crustal elemental particles, in the KSEAS samples, were substantially lower (1.4~11 times) than those found in the typical filter-based samples. This discrepancy is probably due to difficulties in transferring insoluble dust particles to the collection vials in the KSEAS. Temporal profiles of elemental concentrations indicate that some transient events in their concentrations are observed over the sampling periods. For the elemental species studied, atmospheric concentrations during the transient events increased by factors of 4 in Mn~80 in Zn, compared to their background levels. Principle component analyses were applied to the hourly KSEAS data sets to identify sources affecting the concentrations of the metal constituents observed. In this study, we conclude that hourly measurements for particle-bound elemental constituents were extremely useful for revealing the short-term variability in their concentrations and developing insights into their sources.