• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1349-1350
• /
• 2007

Epitaxial thin films of aluminum-doped zinc oxide (AZO) have been deposited on commercial corning glass using an Nd:YAG pulsed laser deposition technology. The structural, electrical and optical properties of these films were investigated as a function of oxygen pressure. The experimental results show that the electrical resistivity of films deposited at 5 mTorr with substrate temperature of $300^{\circ}C$ were $4.633{\times}10^{-4}$. The average transmission of AZO thin films in the visible range were over 90%.

• 한국식품영양과학회지
• /
• 제29권5호
• /
• pp.758-761
• /
• 2000

This study was performed to investigate the contamination levels of harmful heavy metals that sampled from June. 1 to June. 31, 1999, at 3 areas in Jeonbuk west cost area. The heavy metal contents were determinated by ICPS (Inductively Coupled Plasma Spectrometer) method. The levels of total lead, cadmium, aluminum, zinc and copper were determined and the results were summarized as follows: The minimum and maximum values (ppm) of 3 areas of shellfishes (shortneck clam, hard clam, cockle clam, snail and top sell) were Pb: 1.29~4.35, Cd:0.12~0.37, Al: 9.45~54.06, Zn: 9.65~15.14, Cu: 0.62~1.64 ppm.

• 반도체디스플레이기술학회지
• /
• 제16권2호
• /
• pp.89-93
• /
• 2017

For various process pressures, aluminum doped zinc oxide(AZO) films were deposited by in-line pulsed-DC sputtering. The deposited AZO films were optically and electrically investigated and analyzed for the window layers of CIGS solar cell systems. As the pressure was increased from 9 mtorr to 15 mtorr, the thickness of AZO was decreased as a result of scattering and its sheet resistance was rapidly increased. The transmittance of AZO was slightly decreased as the pressure was increased and the calculation of figure of merit(F.O.M) was dependent on the sheet resistance. The structural characteristics of AZO thin films analyzed by X-ray diffraction(XRD) showed no significant dependency according to the pressure.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.52-53
• /
• 2020

The thermal spray coating process is being used to protect the metals and alloys from wear, abrasion, fatigue, tribology, and corrosion failure. Therefore, in the present study, Al and Zn was deposited by plasma arc thermal spray process onto the steel substrate and their performance was assessed. The bond adhesion result shows that Al coating has higher value attributed to compact, dense, and less porous compared to Zn coating which contain defects/pores and uneven morphology assessed by scanning electron microscopy (SEM). Electrochemical results show that the Al coating exhibited higher impedance value compared to Zn in artificial ocean water solution at prolonged exposure periods. However, both coatings show the increment in polarization resistance with exposure periods which reveal that porosity of coatings is filled by the corrosion products.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.17-18
• /
• 2021

In the present study, Al-Zn coating was deposited by Arc thermal (AT) and plasma arc thermal (PAT) spray processes, and their corrosion characteristics were studied in 3.5% NaCl through electrochemical impedance spectroscopy (EIS), scanning electron microscope (SEM) and mechanical tests. The bond adhesion result showed that plasma arc sprayed coating had a higher value attributed to compact, dense, and less porous coating compared to arc thermal spray coating which contains defects/pores and uneven morphology as revealed by scanning electron microscope analysis. Electrochemical results revealed that the plasma arc sprayed coating had a high polarization resistance at early stage of immersion, suggesting its excellent corrosion protection performance.

• 생태와환경
• /
• 제53권2호
• /
• pp.165-172
• /
• 2020

중금속은 다양한 경로를 통해 환경 중 배출되어 서식 생물에 노출되며 체내 다양한 생리학적 불균형을 유도한다. 본 연구에서는 수서생물지표종으로 이용되는 깔따구(Chironomus riparius)를 이용하여 야외 중금속(Al, Aluminum; Cr, Chromium; Cu, copper; Mn, Manganese; Zn, Zinc) 농도 노출에 따른 다양한 분자발현 반응과 상관성을 분석하였다. 생물 체내 분자 반응을 관찰하기 위해 heat shock protein 40, 70, 90 (HSP40, 70, 90), cytochrome 450(CYP450), Glutathione S-transferase (GST) and Serine-type endopeptidase (SP)를 이용하였다. 그 결과, 스트레스 분자마커로 이용되는 HSPs 유전자들은 중금속 노출된 개체들에서 대조군보다 높은 경향을 보였으며 Cu 노출 시 가장 높은 발현을 나타냈다. 해독에 관여하는 CYP450과 GST 유전자 발현 결과, Cr과 Cu에서는 다른 노출군에 비해 높은 발현 경향을 나타냈다. SP 유전자 발현 결과 Al을 제외한 모든 노출군이 대조군과 유사한 발현 패턴을 보였다. 이와 같은 연구 결과는 실내에서 환경 중 존재하는 실제 농도를 반영한 독성실험을 통해 노출물질과 농도에 따라 특이적으로 발현하는 분자마커 패턴을 보고하였다. 또한, 수생태계로 유입되는 중금속이 하천에 서식하는 생물에 주는 유해 영향에 대한 정보와 분자 지표 유전자들의 현장 적용 가능성을 보여준다.

• 한국결정성장학회지
• /
• 제25권4호
• /
• pp.127-134
• /
• 2015

AlN 단결정은 넓은 밴드갭(6.2 eV), 높은 열 전도도($285W/m{\cdot}K$), 높은 비저항(${\geq}10^{14}{\Omega}{\cdot}cm$), 그리고 높은 기계적 강도와 같은 장점들 때문에 차세대 반도체 적용을 위한 많은 흥미를 끈다. 벌크 AlN 단결정 또는 박막 템플릿(template)들은 주로 PVT(Physical vapor transport)법, 플럭스(flux)법, 용액 성장(solution growth)법, 그리고 증기 액상 증착(HVPE)법에 의해 성장된다. 단결정이 성장하는 동안에 발생하는 결함들 때문에 상업적으로 어려움을 갖게 된 이후로 결함들 분석을 통한 결정 품질 향상은 필수적이다. 격자결함 밀도(EPD)분석은 AlN 표면에 입자간 방위차와 결함이 존재하고 있는 것을 보여준다. 투과전자현미경(TEM)과 전자후방산란회절(EBSD)분석은 전체적인 결정 퀄리티와 다양한 결함의 종류들을 연구하는데 사용된다. 투과전자현미경(TEM)관찰로 AlN의 형태가 적층 결함, 전위, 이차상 등에 의해 크게 영향을 받는 것을 알 수 있었다. 또한 전자후방산란회절(EBSD)분석은 전위의 생성을 유도하는 성장 결함으로서 AlN의 zinc blende 폴리모프(polymorph)가 존재하고 있는 것을 나타내고 있었다.

• 대한기계학회논문집B
• /
• 제24권1호
• /
• pp.21-28
• /
• 2000

Although commercial PIV systems have been widely used for the non-intrusive velocity field measurement of fluid flows, they are still under development and have considerable room for improvement. In this study, a single-frame double-exposure PIV system using a high-resolution CCD camera was developed. A pulsed Nd:Yag laser and high-resolution CCD camera were synchronized by a home-made control circuit. In order to resolve the directional ambiguity problem encountered in the single-frame PIV technique, the second particle image was genuinely shifted in the CCD sensor array during the time interval dt. The velocity vector field was determined by calculating the displacement vector at each interrogation window using cross-correlation with 50% overlapping. In order to check the effect of spatial resolution of CCD camera on the accuracy of PIV velocity field measurement, the developed PIV system with three different resolution modes of the CCD camera (512 ${\times}$ 512, lK ${\times}$ IK, 2K ${\times}$ 2K) was applied to a turbulent flow which simulate the Zn plating process of a steel strip. The experimental model consists of a snout and a moving belt. Aluminum flakes about $1{\mu}m$ diameter were used as scattering particles for the liquid flow in the zinc pot and the gas flow above the zinc surface was seeded with atomized olive oil with an average diameter of 1-$3{\mu}m$. Velocity field measurements were carried out at the strip speed $V_s$=1.0 m/s. The 2K ${\times}$ 2K high-resolution PIV technique was significantly superior compared to the smaller pixel resolution PIV system. For the cases of 512 ${\times}$ 512 and 1K ${\times}$ 1K pixel resolution PIV system, it was difficult to get accurate flow structure of viscous flow near the wall and small vortex structure in the region of large velocity gradient.

• 한국해양공학회지
• /
• 제24권5호
• /
• pp.67-74
• /
• 2010

Chromate conversion coating is a coating technique used to passivate aluminum, zinc, cadmium, copper, silver, magnesium, tin, and their alloys to slow corrosion. The process uses various toxic chromium compounds, which may include hexavalent chromium. The industry is developing less toxic alternatives in order to comply with substance restriction legislation, such as RoHS. One alternative is to develop a Cr-free coating solution. In this study, eco-friendly, Cr-free solutions (urethane solution S-700, organic/inorganic solution with Si LRO-317) were used. Test specimens were dried in a drying oven at $190^{\circ}C$ for 3, 5, 7, and 9 minutes. Corrosion resistance was evaluated using a salt spray test for 72 hours. The results show that the optimum corrosion resistance was achieved at $190^{\circ}C$ for five minutes for EGI and three or five minutes for HDGI, respectively. The adhesive properties of the two types of coating solutions were superior regardless of drying time.

• 한국세라믹학회지
• /
• 제38권12호
• /
• pp.1093-1096
• /
• 2001

ZnO내 $Al_2$ $O_3$의 고용은 $Al^{3+}$ 의 ZnO 결정의 $Zn^{2+}$자리, 즉 wurtizite 구조에서 4개의 산소가 만드는 4면체 공간자리로서 치환반응으로 정의될 수 있다. 이 반응은 아연-빈자리 혹은 산소-빈자리와 연관되어 일어나므로 ZnO의 비화학량론성 및 결정결함반응들과 상관관계를 가진다. 이러한 상호연관성은 아연-빈자리 및 산소분압(P $o_2$) 의존성을 낳으며, 결과적으로 ZnO내 Al 용해도([Al/sug zn/]$_{max}$)의 산소분압 의존성을 야기한다. 본 논문은 ZnO내에 Al의 용해도는 산소분압이 증가하면 감소한다는 것을 처음으로 곗나하여 보고한다. [A $l_{zn}$ ]$_{max}$ $P_{o2}$$^{-1}$4/./.