• 제목/요약/키워드: Zinc plating

검색결과 55건 처리시간 0.029초

Membrane을 이용한 도금폐수중 아연이온의 분리에 관한 연구 (A Study of Zinc Separation from Metal Plating Waste Water using RO Membrane)

  • 장차순;이효숙;정헌생;이원권
    • 한국막학회:학술대회논문집
    • /
    • 한국막학회 1993년도 추계 총회 및 학술발표회
    • /
    • pp.65-67
    • /
    • 1993
  • 도금공업은 공업기반기술의 하나로서 기계 및 소재산업의 최종 마무리 공정으로 중요시 되고 있으나 운전중 기술의 특성에 의하여 중금속이 함유된 도금폐수를 방출하게 되어 인체 및 생태계에 매우 유해한 산업중의 하나이다. 기존의 도금폐수처리 방븝으로 침전 응집법이 있으나 이는 사용되는 약품의 양이 많고, 슬러지를 배출하여 2차 공해를 유발하므로 완전한 처리 방법이라 할 수 없다. 본 연구에서는 이러한 국내 도금폐수의 현황을 조사한바 도금폐수중 배출양이 가장 많은 아연계폐수를 대상으로 RO Membrane를 사용하여 실험하였다. RO Membrane으로 실험하였을때 아연이온은 Retentate로 분리 농축되고 Permeate는 재생수로 순환 사용할 수 있는 도금폐수의 무배출 처리공정(Zero-Discharge System) 개발을 존 연구의 목적으로 하였다.

  • PDF

Development of Sleeve Parts for Continuous Hot Zinc Plating Roll Applied to Wear-Resistant Alloy Cast Steel

  • Park, Dong-Hwan;Hong, Jin-Tae;Kwon, Hyuk-Hong
    • 한국생산제조학회지
    • /
    • 제26권4호
    • /
    • pp.357-364
    • /
    • 2017
  • Metal casting is a process in which molten metal or liquid metal is poured into a mold made of sand, metal, or ceramic. The mold contains a cavity of the desired shape to form geometrically complex parts. The casting process is used to create complex shapes that are difficult to make using conventional manufacturing practices. For the optimal casting process design of sleeve parts, various analyses were performed in this study using commercial finite element analysis software. The simulation was focused on the behaviors of molten metal during the mold filling and solidification stages for the precision and sand casting products. This study developed high-life sleeve parts for the sink roll of continuous hot-dip galvanizing equipment by applying a wear-resistant alloy casting process.

아연도금 표면의 아미노실란-인산 피막의 전기화학적 거동 (Electrochemical Coating of Amino Silane and Phosphoric Acid Coating on Electro Zinc Plating Steel)

  • 김유상;우지훈
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2016년도 추계학술대회 논문집
    • /
    • pp.168-168
    • /
    • 2016
  • 최근 크로메이트 피막의 대체로서 실란 커플링제를 사용한 화성처리가 주목되고 있다. 실란 커플링제는 $R^{\prime}-(CH_2)_n-Si(OR)_3$로 나타내며 OR은 가수분해 가능한 메톡시기, 에톡시기 등의 알콕시기이다. OR기는 가수분해하여 반응성이 높은 시라놀기(-SiOH)를 생성하여 금속표면에 흡착하기 쉽다. 이후, 건조할 때 탈수 축합하여 공유결합이 가능하다. R'는 탄화수소에 한정되지 않고 성질이 다른 원소의 관능기를 나타내며 아미노(amino)기, 글리시딜(glycidyl)기, 멜캅토(melcapto)기, 비닐(vinyl)기를 들 수 있다. 실란 커플링제 가운데 아미노기를 갖는 실란 커플링제는 아연도금 강판을 포함한 다양한 금속의 내식성을 향상시킬 수 있는 화합물의 하나이다. 본 연구에서는 아미노기를 함유한 실란 커플링제에 인산 수용액을 도포하여 수세하지 않고 건조하여 피막을 형성시켰다. 또 부식거동 조사를 목적으로 아미노기를 함유한 실란 커플링제를 사용하여 초산첨가의 경우와 비교하였다.

  • PDF

고해상도 CCD카메라를 이용한 Single-Frame PIV 속도장 측정기법 개발 (Development of Single-Frame PIV Velocity Field Measurement Technique Using a High Resolution CCD Camera)

  • 이상준;신대식
    • 대한기계학회논문집B
    • /
    • 제24권1호
    • /
    • pp.21-28
    • /
    • 2000
  • Although commercial PIV systems have been widely used for the non-intrusive velocity field measurement of fluid flows, they are still under development and have considerable room for improvement. In this study, a single-frame double-exposure PIV system using a high-resolution CCD camera was developed. A pulsed Nd:Yag laser and high-resolution CCD camera were synchronized by a home-made control circuit. In order to resolve the directional ambiguity problem encountered in the single-frame PIV technique, the second particle image was genuinely shifted in the CCD sensor array during the time interval dt. The velocity vector field was determined by calculating the displacement vector at each interrogation window using cross-correlation with 50% overlapping. In order to check the effect of spatial resolution of CCD camera on the accuracy of PIV velocity field measurement, the developed PIV system with three different resolution modes of the CCD camera (512 ${\times}$ 512, lK ${\times}$ IK, 2K ${\times}$ 2K) was applied to a turbulent flow which simulate the Zn plating process of a steel strip. The experimental model consists of a snout and a moving belt. Aluminum flakes about $1{\mu}m$ diameter were used as scattering particles for the liquid flow in the zinc pot and the gas flow above the zinc surface was seeded with atomized olive oil with an average diameter of 1-$3{\mu}m$. Velocity field measurements were carried out at the strip speed $V_s$=1.0 m/s. The 2K ${\times}$ 2K high-resolution PIV technique was significantly superior compared to the smaller pixel resolution PIV system. For the cases of 512 ${\times}$ 512 and 1K ${\times}$ 1K pixel resolution PIV system, it was difficult to get accurate flow structure of viscous flow near the wall and small vortex structure in the region of large velocity gradient.

Continuous removal of heavy metals by coupling a microbial fuel cell and a microbial electrolytic cell

  • Xie, Guo R.;Choi, Chan S.;Lim, Bong S.;Chu, Shao X.
    • Membrane and Water Treatment
    • /
    • 제11권4호
    • /
    • pp.283-294
    • /
    • 2020
  • This work aims at studying the feasibility of continuous removal of mixed heavy metal ions from simulated zinc plating wastewaters by coupling a microbial fuel cell and a microbial electrolysis cell in batch and continuous modes. The discharging voltage of MFC increased initially from 0.4621 ± 0.0005 V to 0.4864 ± 0.0006 V as the initial concentration of Cr6+ increased from 10 ppm to 60 ppm. Almost complete removal of Cr6+ and low removal of Cu2+ occurred in MFC of the MFC-MEC-coupled system after 8 hours under the batch mode; removal efficiencies (REs) of Cr6+ and Cu2+ were 99.76% and 30.49%. After the same reaction time, REs of nickel and zinc ions were 55.15% and 76.21% in its MEC. Cu2+, Ni2+, and Zn2+ removal efficiencies of 54.98%, 30.63%, 55.04%, and 75.35% were achieved in the effluent within optimum HRT of 2 hours under the continuous mode. The incomplete removal of Cu2+, Ni2+ and Zn2+ ions in the effluent was due to the fact that the Cr6+ was almost completely consumed at the end of MFC reaction. After HRT of 12 hours, at the different sampling locations, Cr6+ and Cu2+ removal efficiencies in the cathodic chamber of MFC were 89.95% and 34.69%, respectively. 94.58%, 33.95%, 56.57%, and 75.76% were achieved for Cr6+, Cu2+, Ni2+ and Zn2+ in the cathodic chamber of MEC. It can be concluded that those metal ions can be removed completely by repeatedly passing high concentration of Cr6+ through the cathode chamber of MFC of the MFC-MEC-coupled system.

아연도금강판의 품질향상을 위한 도금욕 내부 유동제어 연구 (Flow Control Inside a Molten Zn Pot for Improving Surface Quality of Zinc Plated Strips)

  • 최재호;고민석;김석;이상준
    • 대한기계학회논문집B
    • /
    • 제25권10호
    • /
    • pp.1392-1399
    • /
    • 2001
  • The flow fields inside a molten Zn pot of continuous hot-chip galvanizing process were investigated experimentally. With varying several parameters including the strip speed Vs, flow rate Q of induction heater. scrapper location and baffle configuration, instantaneous velocity fields were measured using a PIV velocity field measurement technique. Inside the strip region, counter-clockwise rotating flow is dominant. The general flow pattern inside the strip region is nearly not influenced by the strip speed Vs, flow rate Q and the scrapper location. In the exit region, the flow separated from the moving strip due to the existence of a stabilizing roll ascends to the free surface, for the cases of no scrapper and scrapper detached form the roll. On the other hand, the ascending flow to the free surface is decreased, as the flow rate Q of induction heater increases. By installing a baffle around the uprising strip, the flow moving up to the stabilizing roll decreases. In addition, B-type baffle is better than A-type baffle in reducing speed of flow around the stabilizing rolls. However, the flow ascended to the free surface is largely influenced by changing the flow rate Q, and the scrapper location, irrespective of the baffle type.

Effects of Zn2+ concentration and pH on the formation and growth of zinc phosphate conversion coatings on AZ31 magnesium alloy

  • Van Phuong, Nguyen;Lee, Kyuhwan;Lee, Sangyeol;Moon, Sungmo
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2013년도 춘계학술대회 논문집
    • /
    • pp.62-62
    • /
    • 2013
  • Magnesium alloys exhibit many attractive properties such as low density, high strength/weight ratio, high thermal conductivity, very good electromagnetic features and good recyclability. However, most commercial magnesium alloys require protective coatings because of their poor corrosion resistance. Attempts have been made to improve the corrosion resistance of the Mg alloys by surface treatments, such as chemical conversion coatings, anodizing, plating and metal coatings. Among them, chemical conversion coatings are regarded as one of the most effective and cheapest ways to prevent corrosion of Mg alloys. In this study, the effects of various $Zn^{2+}$ concentrations and pH levels on the formation of zinc phosphate conversion coatings (ZPCCs) on AZ31 magnesium alloy were investigated, and corrosion resistances of the coated samples were evaluated by immersion test and potentiodynamic polarization experiment. The corrosion resistance of the coated AZ31 samples was found to increase with increasing $Zn^{2+}$ concentration and the lowest corrosion rate was obtained for the samples coated at pH of 3.07, independent of $Zn^{2+}$ concentration. The best coatings on AZ31 were obtained at [$Zn^{2+}$] = 0.068 M and pH 3.07. At the conditions of [$Zn^{2+}$] = 0.068 M and pH 3.07, the formation and growth processes of ZPCCs on AZ31 Mg alloy are divided into four stages: formation of a dense layer, precipitation of fine crystals on the dense layer, growths of the inner and outer layers, and reorganization of outer crystalline layer.

  • PDF

보물 제930호 이경석 지팡이에 사용된 장석의 제작기법 고찰 (Study on the Manufacturing Techniques of Metallic Ornament of Treasure 930, the Staffs of Yi Gyeong-seok)

  • 이재성;전익환
    • 보존과학회지
    • /
    • 제31권3호
    • /
    • pp.309-318
    • /
    • 2015
  • 조선의 18대 왕인 현종이 당시의 원로대신 이경석에게 의자와 함께 하사한 지팡이는 국가에서 관장하는 제작기법과 양식을 알 수 있는 대표적인 조선시대 공예품이다. 지팡이의 장석을 분석한 결과, 지팡이 몸통에 살포가 연결된 금속제 끝 장식은 먼저 철판을 둥글게 말아 원기둥 형태를 만들고 황동으로 도금하였다. 도금된 부분은 살포와 연결된 금속제 끝 장식에만 국한되고 있으며, 동일한 철 소재로 제작된 살포에는 도금되지 않았다. 칼장식에는 20% 내외의 아연이 포함된 황동이 그대로 사용된 반면 살포 연결부는 철판 위에 황동도금을 했다. 이는 제작당시에 칼장식과 살포 연결부의 표면 색조가 동일하였음을 의미하는 것으로 기능적인 측면에서 바탕소재를 달리할 수밖에 없는 상황에서 외견상의 조화를 추구한 결과로 추정된다. 여기에 적용된 도금법으로 수은아말감, 구리박도금, 구리분말도포, 포목상감, 용융 금속 침적 등 다양한 도금법을 고려할 수 있으며, 분석된 결과는 용융 금속을 이용한 도금법이 적용된 것으로 나타났다. 황동으로 제작된 칼코는 주석납땜으로 접합하였다. 칼날을 고정시키기 위해 사용된 리벳은 강도와 유연성을 모두 충족시킬 수 있는 최적의 소재로 순철이 사용되었다.

Study on Reusable Electrodes for Personal Electrocardiography

  • Kim, Jonghoon;Yoon, Gilwon
    • 센서학회지
    • /
    • 제27권5호
    • /
    • pp.340-344
    • /
    • 2018
  • Electrodes are an important part of electrocardiography (ECG); disposable electrodes have been extensively used. However, personal ECG monitoring devices for Internet of Things applications require reusable electrodes. As there have been no systematic studies on the characteristics of reusable electrodes to date, we conducted this study to assess the performance and feasibility of electrodes with different materials. We built reusable electrodes using twelve different metallic materials, including commonly used copper, silver, zinc, plating materials, chemically inert titanium, stainless steel, and aluminum. Each electrode was fabricated to a size of $5{\times}10mm$. Their characteristics such as offset, baseline drift, stabilization time, and chemical inertness were compared. A personal ECG monitoring system was used to test the manufactured electrodes. The performances of the Ag, Cu, and Zn electrodes were better than the performances of other electrodes. However, these materials may not be used owing to the chemical changes that occur when the electrodes are in contact with the skin, such as discoloration and corrosion, which deteriorate their electrical characteristics. Titanium, stainless steel, and aluminum are chemically stable. The titanium electrode showed the best performance among the three, and it is our recommendation as a material for manufacturing reusable electrodes.

핫프레스포밍 공정에서 내산화 코팅처리가 TWB 용접부 특성에 미치는 영향 (The Effect of Mechanical Property of Tailor Welding Blank and Hot Press Forming Process by the Different Anti-oxidation Coating Treatment on Boron-steel Sheet)

  • 김상권;임옥동;이재훈
    • 열처리공학회지
    • /
    • 제25권6호
    • /
    • pp.283-291
    • /
    • 2012
  • In order to increase the anti-oxidation property during the tailor welding blanked hot press forming process for a high strength boron steel sheet, we performed a different coating method on the boron-steel sheet such as 87% Al - 13% Si and Fe - 8.87 Zn dipping plating procedure. However, during laser welding process, the Al-Si coated steel sheet has showed a low tensile strength and about half value of elongation than the original boron-steel sheet. Aluminum and silicon, elements of coating layer were diffused into the boron-steel matrix and have shown a low strength result than non-coated specimen. On the other hand, Zinc-coated boron-steel has expectedly showed a excellent tensile strength and micro-harness value in the welded area like original boron-steel.