• Corrosion Science and Technology
• /
• 제23권1호
• /
• pp.54-63
• /
• 2024

This work investigated the influence of concentration and applied potential on the characteristics of zinc powder (purity, apparent density, morphology, particle size distribution, and particle zeta potential) produced by the electrochemical process from waste brass. High-purity zinc powder is obtained using selective leaching of industrial brass waste in acidic, neutral, and alkaline solutions. The free immersion method with and without voltage using linear polarization technique is used. In the electrochemical process, hydrochloric acid HCl in three different concentrations (0.1, 0.2, and 0.3) M is used. The time and the distance between the electrodes are set to be 30 min and 3 cm, respectively. It has been found that the percentage purity is 98%, 96%, and 94% for the acidic, neutral, and alkaline solutions, respectively. In addition, the morphology of zinc powder analyzed by SEM was dendritic and mossy. It has been recorded that the purity of zinc increases with the increase of the concentration and applied potential. The highest value of purity for zinc powder was %98.58 in 1000 mV and 0.3M concentration for graphite cathode.

• Journal of the Korean Wood Science and Technology
• /
• 제31권6호
• /
• pp.55-59
• /
• 2003

The fixation and leaching characteristics of chromated copper arsenate (CCA Type C) and chromium- copper-fluoride-zinc (CCFZ) in domestic softwood (Japanese red pine, Korean pine, and Japanese larch) sapwood were investigated using the expressate method to follow chromium fixation and the American Wood-Preservers' Association (AWPA) leaching procedure to determine leaching properties after fixation. The rates of fixation were affected by preservative types; CCA was fixed much faster than CCFZ for all species evaluated. There were definite differences in the fixation rates of different species, with Korean pine requiring shorter to fix than the other species evaluated. Chromium fixation was greatly enhanced by elevated temperatures, and fixation time can be estimated according to fixation temperatures applied. The percentage of arsenic and zinc leached from domestic softwoods was relatively high compared to chromium and copper, indicating that there is still a relatively high unfixed arsenic and zinc components after complete chromium fixation in CCA-and CCFZ-treated samples, respectively.

• Environmental Engineering Research
• /
• 제25권3호
• /
• pp.335-344
• /
• 2020

This work describes highly efficient recovery and selective leaching of Zn from electric arc furnace dust (EAFD) with different physicochemical properties, induced by acid leaching at ambient conditions. The chemical compositions, mineralogical phases, and particle sizes of the EAFDs were analyzed and compared. The effects of leaching time, liquid/solid ratio, acid type, and acid concentration on the selective leaching of Zn were also studied. The EAFD with high Fe/Zn ratio (> 1, EAFD₃) was richer in ZnFe₂O₄ and exhibited larger particle size than samples with low Fe/Zn ratio (< 1, EAFD_1,2). ANOVA analysis revealed that the Fe/Zn ratios of the EAFDs also have a significant effect on Zn extraction (p < 0.005). Selective leaching of Zn with minimum Fe dissolution was obtained at pH > 4.5, regardless of other parameters or sample properties. The maximum Zn extraction rate obtained by the pH control was over 97% for EAFD₁ and EAFD₂, 76% for EAFD₃, and 80% for EAFD₄. The present results confirm that the Fe/Zn ratio can be used to identify EAFDs that permits facile and high-yield Zn recovery, and pH can be used as a process control factor for selective leaching of Zn regardless of any differences in the properties of the EAFD sample.

• 자원리싸이클링
• /
• 제2권2호
• /
• pp.22-26
• /
• 1993

아연 제련잔사로부터 갈륨과 인디움을 동시에 회수하기 위한 연속공정도를 확립하고자 하였다. 갈륨만을 회수하는 알칼리처리법과는 달리 황산침출에 의할 경우 갈륨과 인디움의 동시회수가 가능하며, 2단계 중화를 통하여 용액중의 다량의 철분을 분리제거할 수 있었다. 1차처리하여 얻은 갈륨과 인디움의 침천물은 알칼리 및 산처리에 의해 갈륨과 인디움을 각각 분리회수할 수있었으며, 약산성 용액에서 저농도의 인디움을 회수하고자 할 경우 아연금속분말에 의한 cementation법을 사용하는 것이 효고적이었다.

• 자원리싸이클링
• /
• 제1권1호
• /
• pp.58-68
• /
• 1992

아연을 함유하고 있는 산업폐기물로부터 첨단산업의 소재원료인 미립의 고순도 ZnO 분말을 아연제련의 용매추출 공정에서 직접 합성할 수 있는 방법을 개발하고자 하였다. 아연 함량이 55%인 선재산업의 폐기물을 황산으로 침출하여 아연을 추출하였다. 함아연 용액에서 철분을 침전시켜 제거한 후 D2EHPA를 추출제로 사용하는 용매추출에 의해 아연이온을 유기상으로 추출하여 정제한 뒤 oxalic acid와 같은 침전제를 사용하여 유기상의 아연 이온을 precipitation stripping 법으로 탈거, 침전시켜 $ZnC_2O_4$ 분말을 합성하였으며 이를 해소하여 99.9% 이상의 ZnO 분말을 제조하였다. 황산농도, 침출시간, 황액농도가 아연의 침출율에 미치는 영향과 용매추출시 용액의 산도에 따른 아연과 불순물의 추출거동을 조사하여 최적정제조건을 얻었다. 또한 oxalic acid의 농도, 온도, 계면활성제의첨가, 침전시간 등이 생성된 $ZnC_2O_4$ 분말의 형상과 입자크기 및 분포에 미치는 영향에 대해 조사하였다.

• 공업화학
• /
• 제17권5호
• /
• pp.517-520
• /
• 2006

망간산화물과 아연이 혼재되어 있는 폐알카리 망간전지로부터 황산용액에서 환원제로 과산화수소를 이용하여, 침출제 농도, 온도, 반응시간, 과산화수소의 양 등을 변화시키면서 망간과 아연의 침출거동을 조사하였다. 그 결과 고액농도 100 g/L, 황산농도 3.0 M, 반응온도 $60^{\circ}C$, 교반속도 200 r.p.m. 그리고 과산화수소를 첨가하지 않은 조건에서 아연과 망간의 침출율은 각각 97.7 %와 43.5 %를 나타내었으나, 반응온도 $60^{\circ}C$에서 과산화수소 30 mL를 첨가하였을 때는 아연과 망간의 침출율은 각각 99.6 %와 97.1%를 나타내어 환원제를 첨가하지 않은 조건보다 망간의 침출율이 약 2배 정도 증가하였다. 그러나 과산화수소 양이 30 mL 이상에서는 첨가되는 과산화수소의 양이 증가하여도 아연과 망간의 침출율의 변화는 거의 없었다.

• 환경영향평가
• /
• 제16권1호
• /
• pp.35-43
• /
• 2007

Vitrified aggregates obtained by using mine tailings were evaluated using various leaching methods to assess their environmental safety. The leaching tests in this study include continuous batch leaching, Dutch availability leaching, pH-stat and tank diffusion test as well as TCLP (Toxicity Characteristic Leaching Procedure), which is commonly adopted. Vitrification technique has successfully been applied treating some solid wastes containing high level of heavy metals, such as EAF (Electric Arc Furnace) dust and mine tailings. The potentially most leachable element among trace metals was As and theoretically about 7% of total concentrations in the aggregate can be released under extreme condition. Zinc was leached about 4% and the other trace metals including Cd, Cr and Pb were hardly released from the vitrified mine tailing aggregate.

• 자원환경지질
• /
• 제26권3호
• /
• pp.421-429
• /
• 1993

Dissolution reactions of chemical grade zinc sulfide and natural sphalerite were studied in ferric chloride solution as an oxidant. To enhance the leaching reaction, ultrasonic technique was employed in this investigation. For the reaction with pure zinc sulfide, chemical reaction was the rate limiting step in the range of low conversion irrespective of applying ultrasonic wave. And the diffusion through liquid film instead of diffusion through product layer of free sulfur was the rate determining step because ultrasonic vibration removes the product from reaction zone. In the case of sphalerite with the ultrasonic vibrator, it was found that inert mineral layer diffusion was the rate determining step, in which the elemental sulfurs formed were removed by the ultrasonic action. Experimental results showed that the ultrasonic technique proved to be the methods which can significants improve the leaching performance.

• 자원리싸이클링
• /
• 제22권5호
• /
• pp.13-19
• /
• 2013

구리, 아연 및 납 등의 중금속으로 오염된 사격장 토양으로부터 중금속 성분을 제거하기 위한 친환경적인 공정을 개발하기 위해 구연산용액을 이용하여 중금속 침출거동에 대한 pH의 영향을 조사하였다. 구연산 침출실험은 구연산과 구연산나트륨을 혼합하여 pH를 조절한 용액을 이용하여 시료입도 $75{\mu}m$이하, 반응온도 $50^{\circ}C$, 구연산 농도 1 몰, 광액농도 5%, 교반속도 100 rpm, 그리고 침출시간 1 시간의 조건에서 진행하였다. 침출반응 전후의 pH 변화는 미미하여 침출에 미치는 수소이온농도의 직접적인 영향은 크지 않은 것으로 판단되었다. 구리, 아연, 납의 제거율은 pH가 증가함에 따라 감소하였고, 열역학적인 계산결과, 이와 같은 침출거동은 중금속 이온이 구연산염 이온종과 착이온을 형성하는 반응과 중금속이온이 수산화이온과 결합하여 수산화물로 침전하는 반응에 의해 결정되는 것으로 분석되었다.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2002년도 춘계임시총회 및 제 20회 학술발표대회
• /
• pp.111-112
• /
• 2002