• 한국표면공학회지
• /
• 제43권2호
• /
• pp.51-56
• /
• 2010

The zinc electroplating with respect to the chloride concentration was investigated by X-ray diffraction(XRD), scanning electron microscope (SEM), and cathodic polarization measurement. The cathodic overpotential during electroplating was first decreased and then increased with increase of chloride concentration in electrolyte. The decreased cathodic overpotential leads to preferred orientation of (002) plane, high current efficiency and satisfactory zinc deposits. The increased cathodic overpotential causes random orientation, low current efficiency and edge burning. The cathodic overpotential was affected by chloride concentration in electrolyte, not by the kind of chloride, such as NaCl and KCl. An optimized chloride concentration was 3 M for zinc electroplating. Also, it is considered that NaCl can be a alternation for KCl as a main salt of zinc electroplating bath.

• 한국표면공학회지
• /
• 제11권3호
• /
• pp.3-9
• /
• 1978

Organic compounds, such as aldehydes, amines, amides, sulfur compounds of polymers, have been added to cyanide Zinc electroplating bath to achieve in improvement of the brightness and of the current efficiency. It was found that the addition of only one compound o these organic compounds in the bath were unsuitable to be used for brightener, but mixure of aldehyde and reaction products obtained from epoxides and amines and/or amides were suitable for brightener in cyanide zinc electroprating baths.

• 자원리싸이클링
• /
• 제12권1호
• /
• pp.25-32
• /
• 2003

도금폐수로부터 철, 구리, 아연 및 니켈 등 중금속을 분리ㆍ회수하기 위한 용매추출시 추출제의 종류 및 평형 pH에 따른 각 금속의 분리효과를 조사하였다. 실험결과 아연은 추출제로 PC-88A가 가장 효과적이며, pH 2.5에서 100% 추출할 수 있다. 구리와 니켈은 LIX 84를 사용하여 추출하면 각각 pH2에서 100% 그리고 pH4～5에서 90% 이상 추출할 수 있다. 한편, 중금속이 혼재한산ㆍ알칼리계 도금폐수에 대한 용매추출에서는 먼저 3가 철을 지방산인 20％의 Naphthenic acid나 10％의 Versatic acid-10로 pH2∼2.5 부근에서 분리ㆍ회수하고, 그 다음에 3%의 LIX 84를 사용하여 pH2에서 구리를 용매추출하여 분리하고 난 후 20% PC-88A 로 pH2.5∼3에서 아연을 용매추출하여 회수하면 수상에 니켈만이 잔류하여 각각의 금속분리가 가능하다.

• 분석과학
• /
• 제13권6호
• /
• pp.699-704
• /
• 2000

도금폐수중의 시안이온의 전기화학적 분해 및 아연이온의 제거에 관한 연구를 백금으로 도금된 티타늄 양극과 스텐레스 음극 전극을 사용하여 수행하였다. 전기분해시간, 셀전류, 첨가제, 염화물농도등의 여러 가지 실험파라메터를 연구하여 도금폐수중의 시안화물 분해 및 수용액중의 아연이온의 효과적인 제거에 사용하였다. 셀전류와 첨가제의 종류에 따라 시안이온의 분해 및 아연이온의 제거 효율이 크게 영향을 받는 것이 발견되었다. 시안이온의 분해 및 아연이온의 제거를 위한 경제적이며 높은 효율을 나타내는 최적화된 조건은 1시간의 전기분해시간, 12A의 전류, 그리고 0.5 M NaCl 첨가제를 사용하여 확립하였다. 양극에서의 시안이온의 분해에 관한 반응메카니즘도 논의하였다.

• 한국표면공학회지
• /
• 제13권1호
• /
• pp.3-7
• /
• 1980

The crystalline structure and leveling action on the deposit of zinc from the cyanide zinc electroplating bath containing organic additives, such as aldehydes, polymers, amines and condensed product, have been studied by microscope and X-ray diffraction methods. The crystalline structure of the deposit from the bath containing no-additive, polymers and aldehydes appeared very strong orientation on (101) plane and the surface was rough, while from condensed product having remarkable effects in brightness appeared very strong orientation on (110) and the crystallinity was very fine. In the leveling action, the effect of any additives except reaction product was not appreciable, whereas the effect of the reaction product obtained remarkably excellent result.

• 한국표면공학회지
• /
• 제12권3호
• /
• pp.174-179
• /
• 1979

The effects of brightness, electrochemical behaviour on the organic additives, such as aldehydes, polymers, amines and condensed product obtained from epichlorohydrin and nicotinamide, in cyanide zinc electrolplating bath have been studied by controlled potential electrolyser. The results were summerized as follows: (1) It was found that the addition of only one compound of these organic compounds in the bath was unsuitable but mixture of anisaldehyde or monoethanolamine and condensed product as suitable as brightener. (2) The cathodic polarization curve of polymers or aldehydes in cyanide zinc electroplating bath was almost the same but the cathodic polarization curve of condensed product remarkable shifted to noble potential more than non-additive curve.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 1999년도 춘계학술발표회 초록집
• /
• pp.13-13
• /
• 1999

• 한국표면공학회지
• /
• 제8권1호
• /
• pp.15-23
• /
• 1975

Electrodeposition of metals form aqueous solutions (eg, electroplating ) is frequently accompanied, by the discharge of hydrogen ions(in acidic solutions) or water molecules ( in alkaline electrolytes). The atomic hydrogen produced thus may partly diffuse into the interior of the substrate and when this is absorbed by iron/steel substrate, it has detrimental effects on the mechanical properties of the steel, leading to ahydrogen embrittlement. Steels, particularly the high strength steels, are prone to hydrogen embrittlement. In view of the increasing applications of high strength steels in variousindustries, particularly in the aircraft manufacture, there has been renewed interest in the studiesonhydrogen embrittlement during electroplating of metals. In this review, the author summarizes the reports on hydrogen embrittlement during preplating of metals. In this review , the author sumamrizes the hydrogen embrittlement during electroplating of metals. In this review , the author summarizes the reports on hydrogen embrittlement during preplating operations and electroplating of metals like copper, nickel, tin, zinc ,cadimum and chromium. Finally, the effect of degassing by baking to deembrittle the plated high tensile steels and mechanism of hydrogen embrittlement are briefly indicated.

• 한국표면공학회지
• /
• 제25권2호
• /
• pp.57-65
• /
• 1992

Increasing demands of high corrosion resistant sheet steels for the automotive body panels have been leading to a tendency toward heavier coatings of electroplated sheet steels. The specimens were prepared from lab-scale electroplating simulator with various coating weights of zinc, zinc-iron and zinc-nickel coated sheet steels and evaluated in the light of the application for the automotive body panels. Corrosion resistances by sacrificial action were improved with increasing coating weights for all electroplated sheet under survey, but blistering resistances of pure zinc coated sheet steels were not as much. On the other hand, the adhesions of heavy alloy coatings showed poor powdering performances by the external compressive or tensile forces.

• 한국표면공학회지
• /
• 제29권4호
• /
• pp.219-228
• /
• 1996

Neutral Zinc Electroplating(NZE) utilizing the electrolyte of pH 6 to 8 has advantages in waste treatment and the protection of equipment. NZE is beneficially used in chromating treatment, but the limiting current density and the current efficiency are low. Therefore this study is investigated to analyse the characteristics of NZE and to obtain high current density and current efficiency. The deposition potential of zinc in the NZE bath is about 110mV, which is lower than acidic bath. The current density possibily increases up to 60A/d$\m^2$ in lower complexing agent content and pH 6. More than 90% of cathodic current efficiency was obtained in NZE bath. The NZE morphology shows smaller grains than acidic bath. The addition of 4$m\ell$/1 second brightener gives finer morphology. As pH becomes higher, (002) plan decreases and (100), (101) and (110) planes increase in the no additives solution.