• Environmental Analysis Health and Toxicology
• /
• v.19 no.3
• /
• pp.261-269
• /
• 2004

Although the biological functions of metallothioneins (MTs) are still being investigated, they have been suggested to be involved in detoxification of heavy metals, scavenging of free radicals, and protection against alkylating agents. MTs have been reported to be induced in most of animal tissues by heavy metals such as zinc, copper, mercury and cadmium, and the proteins have binding affinities to the metals. However, the presence or induction of MTs was reported not to be clear in leydig cells, which produce testosterone for the maturation of spermatozoa in male testes. In this study, we investigated the inducibility of metallothionein isomers by cadmium in cultured mouse leydig cells. Total RNA was extracted from the near confluent grown leydig cells and RT-PCR was Performed using the Primers which were synthesized on the basis of MT-1, 2, 3 and 4 cDNA from GenBank database. As results, MT-1 and MT-2 mRNA were found to be expressed in cadmium non-treated control cells and MT 1 mRNA expression was dose-dependent when leydig cells were treated with cadmium chloride. But MT-3 which is known to be brain specific and MT-4 which is another isoform of metallothionein, were not expressed. Other genes induced or depressed in cadmium treated leydig cells were also identified by microarray techniques.

• Journal of environmental and Sanitary engineering
• /
• v.17 no.1
• /
• pp.63-68
• /
• 2002

Amount of styrene and divinylbenzene(DVB) was adjusted under injection of nitrogen, copolymer having crosslink of 1%, 2% and 5% was synthesized and zinc chloride was added to it. Put into benzene, swell it, add potassium iodide and 1-aza-15-crown-5 of 21.93g in toluene solution and functional resin which can adsorb heavy metal ions by stir reflex at $55^{\circ}C$ for 30 hours was synthesized. The content of divinylbenzene of this resin was increased as crosslink increase, macroporous gets smaller and the content of chlorine was reduced, which affects macrocyclic ligand in the process of substitution and content of nitrogen was also reduced. And the form of functional synthetic resin was distorted by substitution reaction of hydrogen and chlorine atoms.

• Journal of environmental and Sanitary engineering
• /
• v.6 no.2
• /
• pp.17-31
• /
• 1991

The effects of environmental agents on health are great concern for all. It was recognized that each human has differential susceptibility to environmental effects. Susceptibility are changed by many factors includin gdevelopmpntal processes, genetic factors, nutritional stratus, preexisting disease conditions, life style and personal habits. Of all factors nutritional factors seem to be the area most modifiable. Consequently, It is an area that must be more thoroughly evaluated. In this paper, nutrient and environment interactions are reviewed briefly with published literatures. This paper deals with the influence of micronutrients(energy, protein and fat), Vitamins (vitamin 4, vitamin B-complex, vitamin C, vitamin D and vitamin I) and Minerals(calcium, iron, selenium, zinc and other minerls) on environmental effects. The role of arch nutrient was assessed in modifyine the expression of environmental pollutant toxicity with available litertures. In each nutrient section, the effect of environment was considered in following agents : heavy metals(lead, cadmium, mercury, silver and etc), inorganic agents(nitwits, sulfite, fluoride and etc), organic agents(benzene, carbon tatra-chloride, aflatoxin, auto dye, dialbrin etc), Irritant gas(ozone, carbon monooxide and etc), physical agents(X-irradiation, ultra violet, temperature and noise) and insectcides. The extent to which nutritional status modifies environmental effects 3nd its converse, how envirollments affects nutritional status is very complex. In deed, at the present time there are more than 50 chelnical/phycical agents that affect the nutrient metabolism and/or have their toxicity either directly diminished or enhanced by nutrients of those agents, small number of agents for each nutrients have sufficient evidence to warrant any reasonable degree of confidence in their hypothesized associtation. With these information at this present time it is hard to conclude that the recommended dietary allowance for each nutrient should be reconsidered.

• Textile Coloration and Finishing
• /
• v.9 no.2
• /
• pp.41-49
• /
• 1997

To control free formaldehyde release from fabric finished with N-methylol compounds, resin finished cotton fabric was treated with resorcinol solution, dried and cured. Factors affecting to control formaldehyde release have been investigated. It was shown that the aftertreatment with resorcinol greatly suppressed the free formaldehyde release. Up to concentration of about 5% of resorcinol, the concentration of resorcinol effected on the control of free and evolved formaldehyde. And at high concentration of resorcinol, however, the concentration became rather insensitive to contol formaldehyde release. Addition of some salt catalysts such as ammonium chloride, zinc nitrate, sodium acetate and ammonium acetate, was effective in decreasing formaldehyde release. Considering the effect on the control of formaldehyde and crease recovery, ammonium acetate was concidered to be the best catalyst. It was observed that the optimum curing temperature for the resorcinol treatment was about 15$0^{\circ}C$, and that the curing time did not affected formaldehyde release over three minutes. Although the treatment of resorcinol had a little adverse effect on crease recovery of resin finished fabric, this effect could be negligible.

• Carbon letters
• /
• v.8 no.2
• /
• pp.101-107
• /
• 2007

Activated carbons were prepared by impregnation of crushed clean date pits in concentrated solutions of phosphoric acid or zinc chloride followed by carbonization in absence of air at $600^{\circ}C$. Steam-activated carbon was prepared by gasifying $600^{\circ}C$-carbonization product at $950^{\circ}C$ to a burn-off = 50%. KOH- activated carbon was prepared by impregnating date pitscarbonization product obtained at $450^{\circ}C$ in concentrated KOH solution followed by carbonization at $840^{\circ}C$. Textural properties of these carbons were determined from nitrogen adsorption at $-196^{\circ}C$ and the chemistry of the carbon surface was investigated by determination and of the surface carbon-oxygen (C-O) groups using bases of variable strength and dilute HCl. The adsorption of endosulphan at $27^{\circ}C$ on all the carbons prepared was undertaken. Adsorption of this pesticide at 32 and $37^{\circ}C$ was also undertaken for steam-activated and KOH-activated carbons. Phosphoric acid-activated carbons and steamactivated carbons are mainly microporous and have high surface concentration of C-O groups of acidic nature. Steamactivated and KOH-activated carbons exhibited surface areas > 1000 $m^2/g$ and contain micro and non-micrpores. The adsorption of endosulphan was related to the surface area of non-micropores and was retarded by the high concentration of surface C-O groups. The thermodynamic properties indicated the feasibility of the adsorption process and the possible regeneration of the carbon for further use.

• KSBB Journal
• /
• v.5 no.2
• /
• pp.183-189
• /
• 1990

An efficient method has been developed for the purification of urokinase from 1, 000 liter batches of human urine. The procedure involved precipitation of urokinase with 2mM zinc chloride, resuspension of the precipitate with 0.1M EDTA/0.5M Glycine solution, and CM-Toyopearl and benzamidine-Sepharose column chromatography. The purified urokinase was fully active and possessed a specific activity of 1.07$\times$105IU/mg. The recoveries ranged from 42 to 65% in several preparations(mean value was 51%). And the urokinase purified by this process consisted of about 13% of single chain urokinase (pro-urokinase) as evaluated by SDS-polyacrylamide gel electrophoresis in reducing condition and by S-2444 amldolytic activity under plasmin treatment.

• Textile Coloration and Finishing
• /
• v.24 no.4
• /
• pp.247-252
• /
• 2012

The objective of this study was to find an appropriate method and process for protecting the green color in bamboo leaves and subsequent extraction of the green colorants, chlorophyll. Various inorganic salts including cupric sulfate, ferric sulfate, and zinc chloride were employed as green color protectors. Accordingly, the effects of metal salts and treatment conditions on color protection were investigated to find appropriate protector and conditions. And also, the efficacy of bamboo colorants as a natural green dye was evaluated through dyeing and colorfastness tests. Antimicrobial activity of dyed fabrics was measured by shake flask method in terms of bacterial reduction rate using Staphylococcus aureus(ATCC 6538). On the basis of experimental results for stabilizing bamboo leaves colorants, it was confirmed that Cu was the most appropriate metal type considering dye uptake, photostability and light fastness, and its optimum concentration was 0.025%. After the stabilization, the colorants were extracted efficiently at NaOH aqueous solution of 1.00%. It was concluded that bamboo leave has a high potentiality as new resources to produce a natural green dye with antimicrobial functionality.

• Journal of Electrochemical Science and Technology
• /
• v.10 no.1
• /
• pp.61-68
• /
• 2019

Well aligned $SnO_2$-doped ZnO nanorods were prepared by single step or 2-step electrochemical depositions in a mixture solution of zinc nitrate hexahydrate, ammonium hydroxide solution and 0.1 M tin chloride pentahydrate. The morphologies of electrochemically deposited $SnO_2$-doped ZnO were transformed from plain (or network) structures at low reduction potential to needles on hills at high reduction potential. Well aligned ZnO was prepared at intermediate potential ranges. Reduction reagent and a high concentration of Zn precursor were required to fabricate $SnO_2$ doped ZnO nanorods. When compared to results obtained by single step electrochemical deposition, 2-step electrochemical deposition produced a much higher density of nanorods, which was ascribed to less potential being required for nucleation of nanorods by the second-step electrochemical deposition because the surface was activated in the first-step. Mechanisms of $SnO_2$ doped ZnO nanorods prepared at single step or 2-step was described in terms of applied potential ranges and mass-/charge- limited transfer.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.4
• /
• pp.406-415
• /
• 2018

Objective: The purpose of this study was to investigate the hazards of cosmetic ingredients in Korea. Methods: An Excel database of cosmetic ingredients was developed on a website(Korea Cosmetic Ingredient Dictionary) and used for a hazard assessment based on Tox-free, a database containing toxic information such as on carcinogens, mutagens or reproductive toxicants(CMRs) and endocrine disrupting chemicals(EDCs), as well as other regulated chemicals in Korea. Results: A total of 16,605 chemicals were registered with the cosmetic ingredient dictionary and 308 of them were identified as either CMRs or EDCs. CMRs included formaldehyde and nickel gluconate, and EDCs included parabens, benzophenon, styrene, and toluene. Reproductive toxicants such as xylene, zinc chloride, toluene, and formaldehyde were regulated by the Occupational Safety and Health Act and the Act on the Registration and Evaluation, etc. of Chemical Substances(the Chemical Control Act). Conclusions: Regulations on cosmetics components should be strengthened, and the right to know about cosmetics containing hazardous chemicals should be guaranteed.

• Membrane and Water Treatment
• /
• v.13 no.3
• /
• pp.129-137
• /
• 2022

In this study, the removal of Ciprofloxacin (CPX) from aqueous solutions was investigated by a new activated carbon adsorbent prepared from orange peel (ACOP) with chemical activation using ZnCl₂. The physicochemical properties of orange peel activated carbon were characterized by proximate and ultimate analysis, scanning electron microscopy, BET surface area determination and Fourier transformation infrared spectroscopic studies. According to Brunauer-Emmett-Teller isotherm and non-local-density functional theory, the cumulative surface area, pore volume and pore size of ACOP were determined as 1193 m² g^-1, 0.83 cc g^-1 and 12.7 Å, respectively. The effects of contact time, pH, temperature and ACOP dose on the batch adsorption of CPX were studied. Adsorption equilibrium data of CPX with ACOP were found to be compatible with both the Langmuir and Freundlich isotherms. CPX adsorption capacity of ACOP was calculated as 181.8 mg g^-1 using Langmuir isotherm. The CPX adsorption kinetics were found to be harmonious with the pseudo-second-order kinetic model. Conclusively, ACOP can be assessable as an effective adsorbent for the removal of ciprofloxacin (CPX) from aqueous solutions.