• Applied Chemistry for Engineering
• /
• v.33 no.1
• /
• pp.11-16
• /
• 2022

Metal-organic frameworks (MOFs) are porous materials with nano-sized pores. The degree of gas adsorption and pore size can be controlled according to types of metal ions and organic ligands. Many studies have been conducted on MOFs in the fields of gas storage and separation, and gas sensors. For rapid and quantitative gas adsorption/desorption analyses, it is necessary to form various MOF structures in uniform films on a sensor surface. In this review, some of representative direct methods for uniformly synthesizing MOFs such as MIL-53 (Al), ZIF-8, and Cu-BDC from anodized aluminum oxide, zinc oxide nanorods, and copper thin films, respectively on the surface of a microresonator are highlighted. In addition, the operation principle of quartz crystal microbalance and microcantilever, which are representative microresonators, and the interpretation of signals that change when gas is adsorbed to MOFs are covered. This is intended to enhance the understanding of gas adsorption/desorption analysis of MOFs using microresonators.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.227-227
• /
• 2012

본 연구에서는 RF스퍼터링법에 의하여 glass substrate에 In-Zn-Sn-O (IZTO)를 Zn 성분에 변화를 주면서 $350{\AA}$ 만큼 증착시키고, 1시간 동안 $350^{\circ}C$로 열처리 하였다. In:Zn:Sn의 성분 비율은 20:48:32 (IZTO1), 13:60:27 (IZTO2)이다. 박막의 전자적, 광학적 특성은 XPS (X-ray Photoelectron Spectroscopy), REELS(Reflection Electron Energy Loss Spectroscopy), UV-Spectrometer를 이용하여 연구하였고, 박막의 전기적 특성은 van der Pauw 법을 이용하여 측정하였다. XPS측정결과, IZTO박막은 In-O, Sn-O and Zn-O의 결합을 가진다. REELS를 이용해 Ep=1,500 eV에서의 밴드갭을 얻어보면, $350^{\circ}C$로 열처리 한 박막은 열처리를 하지 않은 것에 비해 밴드갭이 IZTO1는 3.36 eV에서 3.54 eV로, IZTO2는 3.15 eV에서 3.31 eV로 증가하였다. 반면에 Zn 함량이 증가할수록 밴드갭이 감소하는 것을 확인할 수 있었다. 이 값은 UV-Spectrometer를 이용한 광학적 밴드갭과 일치하였다. 또한 van der Pauw method를 이용한 전기적 특성 분석 결과, 열처리를 하기 전에 비하여 carrier concentration이 IZTO1는 $-4.4822{\times}10^{18}cm^{-3}$에서 $-2.714{\times}10^{19}cm^{-3}$로, IZTO2는 $-3.6931{\times}10^{17}cm^{-3}$에서 $-1.7679{\times}10^{19}cm^{-3}$로 증가하였다. 반면에 Resistivity는 IZTO1의 경우 $1.7122{\times}10^{-1}{\Omega}{\cdot}cm$에서 $5.5496{\times}10^{-3}{\Omega}{\cdot}cm$로, IZTO2는 $1.3290 {\Omega}{\cdot}cm$에서 $1.3395{\times}10^{-2}{\Omega}{\cdot}cm$로 감소하였다. 그리고 UV-Spectrometer를 이용한 광학적 특성을 측정해본 결과, 가시광선영역인 380~780 nm에서의 투과율이 83%이상으로 투명전자소자로의 응용이 가능하다는 것을 보여주었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.135-136
• /
• 2009

The etching characteristics of Zinc Oxide (ZnO) and etch selectivity of ZnO to $SiO_2$ in $BCl_3/Ar/Cl_2$ plasma were investigated. It was found that ZnO etch rate shows a non-monotonic behavior with increasing both Ar fraction in $BCl_3$ plasma, RF power, and gas pressure. The maximum ZnO etch rate of 53 nm/min was obtained for $BCl_3$(16 sccm)/Ar(4 sccm)/$Cl_2$(3 sccm) gas mixture. The chemical state of etched surfaces was investigated with X-ray photoelectron spectroscopy (XPS). From these data, the suggestions on the ZnO etch mechanism were made.