• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.6
• /
• pp.163-168
• /
• 2011

In this paper, we propose an emotion transfer system based on LED, which presents and transmitts users emotion through Bluetooth and ZigBee using LED light. We propose an emotional LED system interacting multiple LED lighting system and implement the proposed system using smartphone and WPAN network with Bluetooth and ZigBee. For the transmission of data, ZigBee is adopted for each LED lighting system and Bluetooth is utilized for the smartphone. Also, the LED lighting systems which are connected to smartphone have both ZigBee and Bluetooth module for the heterogeneous network. The implemented system shows the validity and applicability of the proposed system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.5
• /
• pp.1284-1294
• /
• 2010

The ZigBee is one of the most important technologies for composing USN. It is one of the IEEE 802.15.4 standards to support personal area networks. It uses a hierarchical routing or an on-demand route discovery strategy as an address allocation method. A hierarchical routing doesn't use a routing table but only uses a child node or a parent node as an intermediate node for data delivery. Therefore, the ZigBee network's topology greatly affects the overall network performance. In this paper, we propose a more trustworthy algorithm than only using the depth and widely variable LQI during network formation, and moreover we propose an algorithm to measure network's trustworthiness. We simulate our algorithm using the NS-2 and implement our network using the MG2400 ZigBee module for verifying performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.4
• /
• pp.797-804
• /
• 2009

Recently, To provide various service for user, there are some trends to construct health care system using bio-sensors and wireless network technologies. Accordingly, An effective middleware is needed to manage and control the various bio-sensors. Also, it is important to extend network and interoperate the various application system in healthcare service. In this paper, we propose to be connected with network based on UPnP by design and implementation of UPnP-ZigBee bridge. The proposed UPnP-ZigBee bridge manage and control ZigBee sensor module effectively. we implemented and tested ECG, PPG, and environment sensor module based on ZigBee wireless network to apply in health care service.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3193-3199
• /
• 2009

The real-time intelligent home network control system is the system which can control and monitor intelligent home network anytime and anywhere with mobile devices. In this study, to embody the real-time control system for intelligent home network, I designed the sub-module which can control various USN senses with using ZigBee, and organized the GUI environment into the client module to drive by users with mobiles devices.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.10B
• /
• pp.644-654
• /
• 2007

ZigBee is one of wireless communication standards and many applications based on Zigbee have been developing for commercial applications. Most of those applications require links to Internet like Zigbee service gateways. However, ZigBee service gateway should provides following functions to be effectively utilized itself: translation of messages between diverse ZigBee application profiles and message formats used in Internet, addition/removal of a new ZigBee service without stopping existing services according to addition/removal of a Zigbee node, and no transmission of unwanted packets to ZigBee network. Therefore, this paper proposes a new type of ZigBee Service Gateway, called ZiGate to provide the functions. The proposed ZiGate is capable of re-configurating message translation modules required in case of addition/removal of nodes and doesn't transmit unnecessary packets to the ZigBee networks by synchronizing itself with ZigBee network. And ZiGate provides translation modules between messages defined in Zigbee application profiles and both text-based and binary-based messages used in Internet. In this paper we implements the ZiGate and evaluates it on the test bed. This evaluations show that the proposed ZiGate works efficiently.

• Journal of Advanced Navigation Technology
• /
• v.17 no.2
• /
• pp.171-176
• /
• 2013

A microstrip-fed miniaturized folded-slot antenna that is cut at the finite ground plane edge for the size reduction is proposed as a ZigBee module operating in the 2.4 GHz frequency band, as specified by the IEEE standard 802.15.4. The antenna is fabricated within space limited to $35mm{\times}9mm$ on a $35mm{\times}35mm$ substrate, which is about the PCB size of a typical wireless ZigBee module. The measured impedance bandwidth and antenna gain are 2.37~2.49 GHz and 2.4 dBi respectively. The measured radiation patterns are similar to conventional folded-slot antennas and are also stable across the pass band. These properties and its compact structure help in making the antenna suitable for ZigBee module.

• Journal of IKEEE
• /
• v.15 no.3
• /
• pp.227-234
• /
• 2011

The Interest in robotics has been steadily increasing in recent times both in Korea as well as abroad. Research on robots for new and diverse fields is ongoing. This study discusses the current research and development on robot actuator, which are used to control the joints of robots, and focuses on developing more efficient technology for joint control, as compared with the current technologies. It also aims to find means to apply the abovementioned technology to diverse industrial fields. We found that easy and effective control of actuators could be achieved by using ZigBee sensor networks, which were widely being used on wireless communications. Throughout the experiments it is proved that the developed wireless actuator could be used for easy control of various robot joints. This technology can be effectively applied to develop two-legged robots that will be able to walk like human, or even quadruped and hexapod robots. It can also be applied to motors used in industry. In this study, we develop an extremely minimized ZigBee sensor network module that can be used to control various servo motors with low power consumption even if it is long distances. We realized effective wireless control by optimizing the ZigBee antenna, and were able to quickly check the status of relevant Tree node through mutual communication between the servo motors composing the ZigBee sensor network and the main server control modules. The developed Servo Motor with ZigBee sensor network modules can be applied in both robotics as well as for home or factory automation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.2
• /
• pp.306-312
• /
• 2014

The ZigBee communication method, which is the most frequently applied to the LED lighting control system, has drawbacks of low-speed and low-capacity, and the communication failure possibility due to environmental influences is on the rise. Therefore, it is important to secure the communication reliability by applying an integrated interface with a wire-wireless dual-network. This paper developed a communication module, which has a platform converging and combining the ZigBee of USN environments with the PLC of power line communication environments, to implement a dualized communication interface system supporting the wire-wireless integrated protocol, and implemented a wire-wireless networking device and a control system software technology. As a result, it was automatically switched into the PLC communication within 4.4 seconds on average when there was an access failure in the ZigBee communication network, so a reliable communication network was built.

• Journal of IKEEE
• /
• v.20 no.1
• /
• pp.107-110
• /
• 2016

In this paper, an IEEE 802.15.4 LR-WPAN 868/915 MHz ZigBee transceiver for IoT systems was designed and implemented. Non-coherent demodulation was exploited to satisfy ${\pm}80ppm$ frequency offset recommended in IEEE 802.15.4 LR-WPAN. Variable bitrate was supported according to operation modes. SPI module was embedded to connect various MCUs. The designed Zigbee transceiver was described in Verilog HDL and it was synthesized and verified in $0.18{\mu}m$ process. Its gate count was about 32,000 gates.

• Journal of the Korea Computer Industry Society
• /
• v.10 no.5
• /
• pp.193-200
• /
• 2009

In this paper, the raid and fire preventable system using Zibee module with IEEE 802.15.4 wireless communication standard and multi-sensor was developed displaying raid and firing condition with wireless network. The raid preventable system is designed using a ultrasonhe waves sensor and infrared sensor. The fire preventable system is designed using a thermistor. The datas for raid and firing condition are communicated from enddevice to coordinator with wireless network and are displayed on PC monitor.