• 제목/요약/키워드: Zero-vector

검색결과 301건 처리시간 0.021초

다중 안테나를 사용하는 인지무선 시스템에서 가중치 precoder를 통한 간섭 제거 기법 (The Interference Nulling using Weighted Precoding in the MIMO Cognitive Radio System)

  • 이선영;손성환;장성진;김재명
    • 한국통신학회논문지
    • /
    • 제35권8A호
    • /
    • pp.768-776
    • /
    • 2010
  • 본 논문에서는 다중 안테나를 사용하는 인지무선 시스템과 허가된 사용자(주사용자)가 공존하는 환경을 고려한다. 여기에서 부사용자 송신기는 직교 시공간 부호(OSTBC)를 사용하고 수신기는 Maximum Likelihood(ML) 검출 방식을 사용한다. Flat 페이딩 채널에서 ML 검출기를 사용할 경우, 최적의 precoder는 고유 빔포밍 방법이다. 본 논문에서는 벡터의 유사성에 기반한 가중치를 적용하여 간섭을 최소화하는 선형 precoding 알고리즘을 제안한다. 시뮬레이션 결과를 통해 제안된 알고리즘이 기존의 ZF(Zero-forcing) 빔포밍보다 최소 2~8dB 우수한 간섭억압 능력을 보여 우수한 SER 성능과 최대 8bps/Hz의 Capacity 증가를 보이는 것으로 나타났다.

지속적 호몰로지를 이용한 이미지 세그멘테이션 기법 제안 (Proposal of Image Segmentation Technique using Persistent Homology)

  • 한희일
    • 한국인터넷방송통신학회논문지
    • /
    • 제18권1호
    • /
    • pp.223-229
    • /
    • 2018
  • 본 논문에서는 이미지에서 검출된 각 연결성분들의 위상적 지속구간 정보를 그래프 기반 이미지 세그멘테이션에 결합하여 보다 안정적인 이미지 세그멘테이션 기법을 제안한다. 이미지의 밝기 또는 색상정보 등을 이용하여 모스 함수를 정의하고 이의 레벨세트로부터 각 연결성분의 위상적 지속구간을 구한다. 각 연결성분이 생성되고 긴 지속구간을 갖는 연결성분에 적절히 병합되는 과정을 영 차원 호몰로지 군의 관점에서 설명한다. 다양한 특성을 갖는 이미지들에 대하여 짧은 지속구간을 갖는 연결성분들을 지속구간이 긴 인근 성분에 적절히 병합시키는 과정을 통하여 보다 안정적인 이미지 세그멘테이션 결과들 얻을 수 있음을 실험으로 확인한다.

Direct Torque Control of Five-leg Dual-PMSM Drive Systems for Fault-tolerant Purposes

  • Wang, Wei;Zhang, Jinghao;Cheng, Ming;Cao, Ruiwu
    • Journal of Power Electronics
    • /
    • 제17권1호
    • /
    • pp.161-171
    • /
    • 2017
  • To enhance the reliability of two-motor drive systems, this paper proposes an improved direct torque control (DTC) scheme (P-DTC) for five-leg dual-PMSM drive systems. First, the topology of a five-leg dual-PMSM drive system is illustrated. To clarify the analysis of the P-DTC, the standard DTC scheme for three-phase drive systems is presented. The operation of a five-leg dual-PMSM drive system is classified into three situations according to the definitions of the switching-vector unions. Compared with the existing DTC scheme (R-DTC), the P-DTC can minimize the replacement of active switching-vectors to zero switching-vectors. When this replacement cannot be avoided, the P-DTC uses a proposed master-slave selection principle to minimize the system error. Comparing with the R-DTC, the P-DTC has lower torque ripples, a wider speed range and a faster torque increasing response. Experiments have been carried out in the coupling and independent modes, and the effectiveness of the P-DTC is verified by the obtained results.

직접 반송파 변조 시스템을 위한 IQ 변조기 설계 (A Design of IQ Modulator for Direct Carrier Modulation Systems)

  • 문태수;;정용채
    • 한국전자파학회논문지
    • /
    • 제22권9호
    • /
    • pp.847-851
    • /
    • 2011
  • 본 논문에서는 입력 신호의 진폭과 위상을 미세 조정할 수 있는 새로운 IQ 변조기를 제안하였다. 제안된 IQ 변조기는 저위상 편차 감쇠기, 분배기, 그리고 결합기로 구성되어 있다. 기존 감쇠기의 위상 편차 특성을 극복하기 위한 새로운 위상 보상 기술을 사용하였고, 이를 수식적으로 분석하였다. 제안하는 IQ 변조기를 통하여 완전한 $360^{\circ}$의 위상 조정과 동시에 입력 신호의 큰 진폭 조정이 가능하며, 극좌표계의 중심점을 지나는 선형적인 IQ신호 배열을 구현하였다.

Algorithm of solving the problem of small elastoplastic deformation of fiber composites by FEM

  • Polatov, Askhad M.;Khaldjigitov, Abduvali A.;Ikramov, Akhmat M.
    • Advances in Computational Design
    • /
    • 제5권3호
    • /
    • pp.305-321
    • /
    • 2020
  • In this paper is presented the solution method for three-dimensional problem of transversely isotropic body's elastoplastic deformation by the finite element method (FEM). The process of problem solution consists of: determining the effective parameters of a transversely isotropic medium; construction of the finite element mesh of the body configuration, including the determination of the local minimum value of the tape width of non-zero coefficients of equation systems by using of front method; constructing of the stiffness matrix coefficients and load vector node components of the equation for an individual finite element's state according to the theory of small elastoplastic deformations for a transversely isotropic medium; the formation of a resolving symmetric-tape system of equations by summing of all state equations coefficients summing of all finite elements; solution of the system of symmetric-tape equations systems by means of the square root method; calculation of the body's elastoplastic stress-strain state by performing the iterative process of the initial stress method. For each problem solution stage, effective computational algorithms have been developed that reduce computational operations number by modifying existing solution methods and taking into account the matrix coefficients structure. As an example it is given, the problem solution of fibrous composite straining in the form of a rectangle with a system of circular holes.

심장 MRI 영상에서 혈류 윤곽선의 자동 추출 (An Automatic Extraction of Blood Flow Contour from Cardiac MRI)

  • 이형직;조상현;최흥문
    • 전자공학회논문지SC
    • /
    • 제37권5호
    • /
    • pp.56-62
    • /
    • 2000
  • 본 논문에서는 심장 MRI 영상에서 혈류 윤곽선을 자동으로 추출하는 방법을 제안하였다. 제안한 방법에서는 기존 snake 보다 포획 범위가 넓은 GVF(gradient vector flow) snake를 사용하고, 심장 MRI의 에지 영상에서 GVF 계(field)가 영인 영역의 외곽을 따라 초기점들을 자동 발생시킴으로써, 전문가의 수작업 초기화에 의존하던 기존 방법과는 달리, 유두근으로 인한 요면을 갖는 혈류 윤곽선까지도 자동으로 추출할 수 있도록 하였다. 유두근 돌출로 인한 요면을 가지거나 잡영이 섞여있는 실제 심장 MRI들에 대해 실험하여 혈류 윤곽선을 효과적으로 자동 추출할 수 있음을 확인하였다.

  • PDF

Neutral-Point-Clamped 인버터의 저 변조지수에서 DC 링크 전압 균형을 위한 간단한 컨트롤 기법 (A Simple Control Strategy for Balancing the DC-link Voltage of Neutral-Point-Clamped Inverters at low modulation index)

  • 마창수;김태진;강대욱;현동석
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
    • /
    • pp.560-564
    • /
    • 2003
  • This paper proposes a simple control strategy based on the discontinuous PWM(DPWM) to balance the DC-link voltage of three-level Neutral-Point-Clamped(WPC) inverters at low modulation index. New DPWM methods in multi-level inverter are also introduced. The proposed DPWM method changes the path and duration to flow the neutral point current out of or into neutral point of the DC-link and it makes the overall fluctuation of the DC-link voltage zero during a sampling time of reference voltage vector. Therefore, the voltage of the DC-link can be balanced fairly well and also the voltage ripple of the DC-link is reduced significantly. Moreover, comparing with conventional methods, the proposed strategy is very simple. The validity of the proposed DPWM method is verified by experiment

  • PDF

A Simple Resonant DC Link Snubber-Assisted Bi-directional Three-phase PWM Converter for Battery Energy Storage Systems

  • Hiraki, Eiji;Nakaoka, Mutsuo
    • KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
    • /
    • 제2B권3호
    • /
    • pp.133-139
    • /
    • 2002
  • In this paper, a prototype of an active auxiliary quasi-resonant DC link (QRDCL) snubber assisted voltage source bidirectional power converter (AC to DC and DC to AC) operating at zero voltage soft-switching (BVS) PWM nlode is presented for a Battery Energy Storage System (BESS). The operating principle of this QRDCL circuit and multifunctional control-based converter system, including PWM inverter mode in which energy flows from the battery bank to the three-phase utility-grid in addition to an active PWM converter mode in which energy flows from the utility-grid to the battery banks are described respectively by the control implementation on the basis of d-q coordinate plane transformation. The multifunctional operation characteristics of this three-phase ZVS PWM bi-directional converter with QRDCL is demonstrated fer a BESS under the power conditioning and processing schemes of energy supply mode and energy storage mode, and compared with a conventional three-phase hard switching PWM bi-directional converter for a BESS. The effectiveness of the three-phase ZVS PWM hi-directional converter with QRDCL is proven via the simulation analysis.

채널 역변환 매트릭스의 가장 큰 싱귤러 값 영향을 줄이는 다중 사용자 프리코딩 (Power Efficient Precoding by Reducing the Effect of the Largest Singular Value of channel Inverse Matrix)

  • 노세용;양현욱;정정화
    • 디지털산업정보학회논문지
    • /
    • 제8권4호
    • /
    • pp.115-120
    • /
    • 2012
  • In multi-user multi-input multi-output (MU-MIMO) system, zero forcing beamforming (ZFB) is regarded as a realistic solution for transmitting scheme due to its low complexity and simple structure. However, ZFB shows a significant performance degradation when channel matrix has large condition number. In this case, the largest singular value of the channel inversion matrix has a dominant effect on transmit power. In this paper, we propose a perturbation method for reducing an effect of the dominant singular value. In the proposed algorithm, channel inverse matrix is first decomposed by SVD for the transmit signal to be expressed as a combination of singular vectors. Then, the transmit signal is perturbed to reduce the coefficient of the singular vector corresponding to the largest singular value. When a number of transmit antennas is 4, the simulation results of this paper shows that the proposed method shows 8dB performance enhancement at 10-3 uncoded bit error rate (BER) compared with conventional ZFB. Also, the simulation results show that the proposed method provides a comparable performance to Tomlinson-Harashima Precoding (THP) with much lower complexity.

Efficiency Improvement of the Fixed-Complexity Sphere Decoder

  • Mohaisen, Manar;Chang, Kyung-Hi
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제5권3호
    • /
    • pp.494-507
    • /
    • 2011
  • In this paper, we propose two schemes to reduce the complexity of fixed-complexity sphere decoder (FSD) algorithm in the ordering and tree-search stages, respectively, while achieving quasi-ML performance. In the ordering stage, we propose a QR-decomposition-based FSD signal ordering based on the zero-forcing criterion (FSD-ZF-SQRD) that requires only a few number of additional complex flops compared to the unsorted QRD. Also, the proposed ordering algorithm is extended using the minimum mean square error (MMSE) criterion to achieve better performance. In the tree-search stage, we introduce a threshold-based complexity reduction approach for the FSD depending on the reliability of the signal with the largest noise amplification. Numerical results show that in 8 ${\times}$ 8 MIMO system, the proposed FSD-ZF-SQRD and FSD-MMSE-SQRD only require 19.5% and 26.3% of the computational efforts required by Hassibi's scheme, respectively. Moreover, a third threshold vector is outlined which can be used for high order modulation schemes. In 4 ${\times}$ 4 MIMO system using 16-QAM and 64-QAM, simulation results show that when the proposed threshold-based approach is employed, FSD requires only 62.86% and 53.67% of its full complexity, respectively.