• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.609-611
• /
• 1996

Zero-Cross Detector makes pilot signal to control the power to CEDM(Control Element Drive Mechanism). Existing Zero-Cross Detectors has had a problem which can cause unexpected reactor trip resulted from fluctuating frequency of input signal coming from M/G Set. The existing Zero-Cross Detector can't work properly when power frequency is varying because it was designed to work under stable M/G Set operation, and produces wrong pilot signal and output voltage. In this report the Zero-Cross Detector is improved to resolve voltage fluctuating problem by using new devices such as digital noise filtering circuit, variable cycle compensator and alarm circuit. And through the performance verification it shows that new circuit is better than old one. If suggested detector is applied to plant, it is possible to use it under House Load Operation because stable voltage can be generated by new Zero-Cross Detector.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1874-1875
• /
• 2007

전력선 통신(Power Line Communication)은 전력선과 연결되어 있는 디바이스들을 간단히 제어하기 위한 기술로 제안 되었으며, 홈오토메이션, 원격 검침(AMR) 분야에서 많이 사용되고 있다. 최근에는 스마트 홈, 유비쿼터스와 관련해 다양한 홈 네트워크 시스템들이 제안되면서 이들 시스템을 효과적으로 구현할 수 있는 방안으로 전력선 통신기술이 많이 제안되고 있다. 전력선 통신은 많은 유용성에도 불구하고 전력선 채널에 대한 정확한 채널 모델링과 전력선 모뎀의 성능에 관해서는 많은 문제점을 나타내고 있다. 본 논문에서는 전력선 통신을 위한 전송선로의 주파수에 대한 잡음과 임피던스 특성 및 전력선 채널에 데이터 신호를 Chirp-SS(Spread Spectrum) 신호로 맵핑하여 채널의 Zero Cross Point 구간에 전송하였을 때의 시뮬레이션 결과와 설계된 FPGA 보드를 비교분석 하였다. 채널 모델은 배경 잡음과 할로겐 잡음, 전송선로의 감쇄 특성만을 고려하였으며, 전력선 채널 상에서의 Zero Cross Point를 이용한 전력선 통신 모뎀의 성능을 분석하였다.

• 한국수학교육학회지시리즈D:수학교육연구
• /
• 제18권2호
• /
• pp.149-170
• /
• 2014

The Vietnamese language has a specific property related to the zero in the name-number system. This study was conducted to examine the impact of linguistic differences and of the zero's position in a number on a transcoding task (verbal number into Arabic number). Vietnamese children and French-speaking Belgian children, from grades 3 to 6, participated in the study. The success rate and the type of errors they made varied, depending on their grade and language. At Grade 4, Vietnamese children showed performances equivalent to Grade 6 Belgian children. Our results confirmed the support provided by language to the understanding and performances in a transcoding task. Results also showed that a syntactic zero is easier to manipulate than a lexical zero for Vietnamese children. The relative influence of language and the source of errors are discussed.

• 대한임상검사과학회지
• /
• 제36권2호
• /
• pp.127-130
• /
• 2004

Analytical sensitivity on TDM test is the lowest concentration that can be distinguished from background noise. The aim of study was to evaluate analytical sensitivity that is also referred to as the lower limit of detection(LLD) about difference between zero calibrator and isotonic saline sample. We tested for 10 days with zero calibrators and 0.85% saline samples while running trilevel control samples under control. Raw data divided by two groups calculated mean and standard deviation from two sample populations and analytical sensitivity by ${\bar{X}}+2SD$. In comparison with isotonic saline samples and zero calibrators, there were significant differences in phenytoin, phenobarbital and vancomycin, etc. Especially analytical sensitivity on phenytoin is at the same level as the upper limit of analytical measurement range with $40{\mu}g/mL$. We think the cause of this is matrix interference. In conclusion, we were sure that standard protocol for analytical sensitivity as lower limit of analytical measurement range on TDM test must be measured with zero standard rather than an isotonic saline sample and type 1 reagent DW for reducing matrix effects within interactions between different materials in a mixture.

• 한국융합학회논문지
• /
• 제12권11호
• /
• pp.35-43
• /
• 2021

최근 다언어모델(Cross-lingual language model)을 활용하여 한 번도 보지 못한 특정 언어의 하위 태스크를 수행하는 제로샷 교차언어 전이(Zero-shot cross-lingual transfer)에 대한 관심이 증가하고 있다. 본 논문은 기계번역 품질 예측(Quality Estimation, QE)을 학습하기 위한 데이터 구축적 측면에서의 한계점을 지적하고, 데이터를 구축하기 어려운 상황에서도 QE를 수행할 수 있도록 제로샷 교차언어 전이를 수행한다. QE에서 제로샷을 다룬 연구는 드물며, 본 논문에서는 교차언어모델을 활용하여 영어-독일어 QE 데이터에 대해 미세조정을 실시한 후 다른 언어쌍으로의 제로샷 전이를 진행했고 이 과정에서 다양한 다언어모델을 활용하여 비교 연구를 수행했다. 또한 다양한 자원 크기로 구성된 언어쌍에 대해 제로샷 실험을 진행하고 실험 결과에 대해 언어별 언어학적 특성 관점으로의 분석을 수행하였다. 실험결과 multilingual BART와 multillingual BERT에서 가장 높은 성능을 보였으며, 특정 언어쌍에 대해 QE 학습을 전혀 진행하지 않은 상황에서도 QE를 수행할 수 있도록 유도하였다.

• Clinics in Shoulder and Elbow
• /
• 제22권2호
• /
• pp.70-78
• /
• 2019

Background: This study evaluated postoperative changes in the supraspinatus from time-zero to 6 months, using magnetic resonance imaging (MRI). We hypothesized that restoration of the musculotendinous unit of the rotator cuff by tendon repair immediately improves the rotator cuff muscle status, and maintains it months after surgery. Methods: Totally, 76 patients (29 men, 47 women) with rotator cuff tears involving the supraspinatus tendon who underwent arthroscopic rotator cuff repairs were examined. MRI evaluation showed complete repair with intact integrity of the torn tendon at both time-zero and at 6 months follow-up. All patients underwent standardized MRI at our institution preoperatively, at 1 or 2 days postoperative, and at 6 months after surgery. Supraspinatus muscular (SSP) atrophy (Thomazeau grade) and fatty infiltrations (Goutallier stage) were evaluated by MRI. The cross-sectional area of SSP in the fossa was also measured. Results: As determined by MRI, the cross-sectional area of SSP significantly decreased 11.41% from time-zero (immediate repair) to 6 months post-surgery, whereas the Goutallier stage and Thomazeau grade showed no significant changes (p<0.01). Furthermore, compared to the preoperative MRI, the postoperative MRI at 6 months showed a no statistically significant increase of 8.03% in the cross-sectional area. In addition, morphological improvements were observed in patients with high grade Goutallier and Thomazeau at time-zero, whereas morphology of patients with low grade factors were almost similar to before surgery. Conclusions: Our results indicate that cross-sectional area of the initial repair appears to decrease after a few months postoperatively, possibly due to medial retraction or strained muscle.

• 센서학회지
• /
• 제9권4호
• /
• pp.316-326
• /
• 2000

본 논문에서는 백색광 간섭현상 (white light interferometry)을 위한 신호처리 알고리즘을 제안한다. 제안하는 알고리즘으로 간섭기의 광경로 절대길이 (absolute optical path length)를 정확하게 측정할 수 있다. 그리고 제안하는 알고리즘은 간섭 무늬 (fringe scan)의 상호 상관관계 함수 (cross-correlation function)와 가설 검증을 사용한다. 가설 검증은 간섭 무늬의 상호 상관관계 함수가 대칭이 되는 봉우리를 영차 간섭 봉우리 (zero order fringe peak) 후보자로 선정함으로써 영차 간섭 봉우리를 오판할 확률을 줄인다. 산탄잡음(shot noise)이 제안된 알고리즘의 성능에 미치는 영향을 컴퓨터 모의 실험을 통하여 조사하였다. 모의 실험결과와 보외법 (extrapolation)을 사용하여 신호대산탄잡음비 (signal-to-shot noise ratio)가 31 dB 보다 클 때의 알고리즘의 성능을 예측하였다. 간섭 봉우리의 세 가지 매개변수 변화 (신호대산탄잡음비, 간섭 스캔 샘플링율 광원의 가간섭성 길이)에 따른 영차 간섭 봉우리 추정 오차를 계산하였다. 모의 실험 결과를 통하여 제안한 알고리즘이 영차 간섭 무늬 봉우리를 정확하게 판별할 수 있음을 보여주었다. 제안하는 신호처리 알고리즘은 소프트웨어적인 기법으로서 경제적이고 속도가 빠르며 간단한 알고리즘이다.

• 전기학회논문지
• /
• 제57권6호
• /
• pp.1032-1035
• /
• 2008

In this paper, a DC power management scheme is proposed for efficient battery operation of 60-GHz receivers. It consists of a rectenna and a zero-cross detector. The harmonic rejection capability of a circular sector antenna is used to simplify the rectenna. The zero-cross detector is introduced to increase sensitivity. When the received power density is larger than 0.013 $mW/cm^2$, it can generate enough DC power to activate an RF receiver. Experimental data is used to verify the proposed idea.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1996년도 추계학술대회논문집
• /
• pp.7-13
• /
• 1996

The kinematically admissible velocity field is developed for the analysis of extruded products. The curving of product in extrusion is caused by the linearly distributed longitudinal velocity on the cross-section of the workpiece at the die exit. In the analysis, the longitudinal velocity in extrusion direction is divided into the uniform velocity and the deviated velocity. In order to satisfy the requrement of the kinematically admissible velocity field, the average value of the deviated velocity should be zero. At the same time, it should linearly change with the distance form the center of gravity of the cross-section of the workpiece. The results of the analysis show that the curvature of product increses with increses in eccentricity of gravity center of the cross-section of workpiece at die entrance form that of the cross-section at the die exit. In the analysis, the longitudinal velocity in extrusion direction is divided into the uniform velocity and the deviated velocity. In order to satisfy the requrement of the kinematically admissible velocity field, the average value of the deviated velocity should be zero. At the same time, it should linearly change with the distance from the center of gravity of the cross-section of the workpiece. The results of the analysis show that the curvature of product increses with increses in ecentricity of gravity center of the cross-section of workpiece at die entrance from that of the cross-section at the die exit.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.519-520
• /
• 2008

In this paper, we design and implement the monolithic zero crossing detection power factor correction IC using a high voltage 30V BCD process. The ZCD PFC IC is designed for power applications, such as notebook, LCD monitor, etc. It includes power factor correction function and several protection circuit, regulator, high-voltage high current output drivers. And also, the designed IC has restart timer function which the output pulse is generated if the output signal of IC is not in a 200us. The simulation results show that the designed IC acts properly as power factor correction IC with efficient protective functions.