• Economic and Environmental Geology
• /
• v.32 no.5
• /
• pp.495-502
• /
• 1999

Common-mid-point (CMP) seismic data on a dipping layer have have a stacking different from a horizontal layer velocity and the reflection points on data are dispersed to many positions. Therefore, the CMP data are not stacked well by the conventional stacking method using the horizontal layer velocity. The CMP gather can ideally stacked by applying dip-moveout(DMO) processing. Hence, modern seismic processing indludes DMO as an essential routine step. DMO processing techniques are broadly categorized by two, Fourier transform and integral methods, each of which has many different computational schemes. In this study, the dip-decomposition technique of the Fourier transform method is used to test the DMO effect on the synthetic scismic data generated for dipping structures. Each of constnat offset sections NMO corrected by using the layer velocity of the model and DMO processed. The resulting zero-offset sections for many offsets are stacked. The stacked sections with DMO processing show the structural boundaries of the models much better than those without DMO processing.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.127-128
• /
• 2000

Organic light-emitting diodes(OLEDs) are constructed using multilayer organic thin films. The hole-transport layer is PVK and the emitting material is rubrene and $Alq_3$. The emitting layer is doped with rubrene partially. As the partially-doped layer migrate from the interface PVK/emitting layer, the emission peak of rubrene decrease and diminish. By comparing with the previous reports, we propose the zero-field hole injection barrier at ITO/PVK interface and hole-trapping effect of rubrene in host materials as predominant factor to determine the emission zone.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.18 no.2
• /
• pp.7-20
• /
• 1981

A method to predict the three-dimensional turbulent boundary layer on ship forms is introduced. The present differential method is in the scope of thin boundary layer theory and adopting the eddy-viscosity turbulence model. Two different numerical schemes are taken in this paper to handle the sign-changing cross-flows. The method is applied to predict the boundary layer development on real ship forms; SSPA Model 720($C_B$=0.675) and HSVA Tanker Model($C_B$=0.85). The results are qualitatively in good agreements with measurements except at the very stern. Therefore the method seems to be very promising if further developments are accomplished to handle the thick stern boundary layer effectively.

• Journal of Korean Association for Spatial Structures
• /
• v.13 no.2
• /
• pp.75-82
• /
• 2013

For each cable component in a cable dome structure, pre-tension is needed for stability of whole the structure. The summation of these pre-tension at each joint should be zero to achieve the self equilibrium structure. The first step in cable dome structure analysis is to find the ratio of pre-tension in each member which can produce a stable and structure on self-equilibrium. In this paper, a new method based on the basic principle of closed force polygon for equilibrium system is proposed for the determination of self-equilibrium mode of cable dome structure. A single layer cable dome and two multi layer type domes have been analyzed. The ratios of cable members are determined by the presented method, and check the validation of the results by numerical calculation.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.3
• /
• pp.305-314
• /
• 2001

A modified model is proposed for calculation of transitional boundary layer flows. In order to develop the eddy viscosity model for the problem, the flow is divided into three regions; namely, pre-transition region, transition region and fully turbulent region. The pre-transition eddy-viscosity is formulated by extending the mixing length concept. In the transition region, the eddy-viscosity model employs two length scales, i.e., pre-transition length scale and turbulent length scale pertaining to the regions upstream and the downstream, respectively, and a universal model of stream-wise intermittency variation is used as a function bridging the pre-transition region and the fully turbulent region. The proposed model is applied to calculate three benchmark cases of the transitional boundary layer flows with different free-stream turbulent intensity (1%∼6%) under zero-pressure gradient. It was found that the profiles of mean velocity and turbulent intensity, local maximum of velocity fluctuations, their locations as well as the stream-wise variation of integral properties such as skin friction, shape factor and maximum velocity fluctuations are very satisfactorily predicted throughout the flow regions.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.05a
• /
• pp.17-20
• /
• 2005

This paper reported the temperature history of concrete placed at deck plate slab under cold climate condition by varying with surface insulating type. No curing sheet and simple insulation curing including non-woven fabric, double layer bubble sheet, the combination of double layer bubble sheet and non-woven fabric dropped temperature below zero within 24 hours, which caused frost damage at early age. On the other hand, the combination of double layer bubble sheet and non-woven fabric and double layer bubble sheet and styrofoam maintained minimum temperature above $4^{\circ}C\;and\;8^{\circ}C$, respectively. Based on core test results compressive strength of concrete with the combination of double layer bubble sheet and non-woven fabric and double layer bubble sheet and styrofoam was higher than those with other curing method due to good insulation effect.

• Journal of Pharmaceutical Investigation
• /
• v.22 no.2
• /
• pp.133-137
• /
• 1992

A novel oral controlled release tablet which may offer more uniform drug level in the body than simple zero-order was developed. The tablet is composed of three layers; outer film layer, middle part compression-coated hydroxypropylmethylcellulose (HPMC) matrix layer, and inner core layer. Each layer contains nicardipine HCl as a model drug. In vitro dissolution test showed that the tablet released the drug in clear three steps; a rapid initial release, followed by a constant rate of release, and then a second phase of fast release of drug. The dissolution characteristics could be modified easily by changing the grade of HPMC, thickness of matrix layer, content of methylcellulose in matrix layer, content of active ingredient in each layer. The pH of dissolution medium did not affect the release profile. This three-step release system is expected to raise the blood concentration rapidly to effective level and to maintain effective blood level longer than simple slow-release systems.

• Journal of Environmental Science International
• /
• v.10 no.5
• /
• pp.329-336
• /
• 2001

Characgcteristics of nocturnal boundary layer(NBL) were analyzed by the upper-air observations data using with the airsonde and pilot balloons from 1994 to 1999 in Kyungpook province. The automate weather boundary layer can become stably stratified when the surface is cooler than the air. Stable nocturnal boundary layer height were estimated from the top of surface stable layer where the vertical gradient of temperature and mixing ratio tend to zero or negative. The depth of the stable nocturnal boundary layer depended largely on the thermal effect rather than the wind effect at nighttime. The NBL was more developed on the land than on the coastal region. The stability index (bulk Richardson number) showed that the NBL was stable when the wind was weak and the vertical gradient of the temperature was strong. The heat budget in the NBL was studied by considering the effect of the radiative and the cooled by both the longwave radiative flux and the divergence of the heat flux, while NBL under the cloudy sky the longwave radiative flux played a role of the warming. It was noted that the heat was not conserved in both cases. To complete the heat budget in the NBL the warming/cooling by advection and subsidence must be considered.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.8
• /
• pp.505-509
• /
• 2016

We have investigated the characteristics of amorphous silicon (a-Si) thin-film solar cell by inserting barrier layer. The conversion efficiency of a-Si thin-film solar cells on graphite substrate shows nearly zero because of the surface roughness of the graphite substrate. To enhance the performance of solar cells, the surface morphology of the back side were modified by changing the barrier layer on graphite. The surface roughness of graphite substrate with the barrier layer grown by plasma enhanced chemical vapor deposition (PECVD) reduced from ~2 um to ~75 nm. In this study, the combination of the barrier layer on graphite substrate is important to increase solar cell efficiency. We achieved ~ 7.8% cell efficiency for an a-Si thin-film solar cell on graphite substrate with SiNx/SiOx stack barrier layer.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.11a
• /
• pp.21-25
• /
• 2008

In this paper, the temperature history and the strength development of concrete corresponded to various bubble sheets layer and curing temperature. Based on the results, In case of the test temperature of -5℃, concrete subject in the exposure condition, result in a frost damage at initial stage by a fall of below zero temperature. In case of the combination of PE film and non woven fabric was after 36 hour, and combination of bubble sheet over double, a tremendous insulating effect of bubble sheet over double is confirmed due to the temperature of concrete fall of below zero temperature after 60 hours. Meanwhile, regarding the -15℃ of temperature, special measure for insulation curing is necessary to secure stability against early frost damage because frost damage was not affected by the lapping thickness of bubble sheet subjected to severe cold weather condition.