• 제목/요약/키워드: Zero bias

검색결과 131건 처리시간 0.024초

장기관측자료를 이용한 DOAS와 점측정 분석시스템의 바이어스 구조에 대한 평가 (Compatibility of DOAS and Conventional Point Monitoring System Through an Evaluation of Bias Structures Using Long-term Measurement Data in Seoul)

  • 김기현;김민영
    • 한국대기환경학회지
    • /
    • 제17권5호
    • /
    • pp.395-405
    • /
    • 2001
  • To make an assessment of the compatibility between DOAS and conventional point monitoring system (MCSAM-2: MS2), we investigated the concentrations of three criteria pollutants which include S $O_2$, N $O_2$, and $O_3$from a national monitoring station in Seoul during the periods of June 1999~August 2000. The average concentration values for the whole study period derived from hourly concentration data sets of those three species indicated that the mean differences between the two methods can be approximated as 18%. When the bias structure of two systems was evaluated through the computation of percent difference(PD) between the two such as ( $C_{DOAS}$- $C_{conventional}$ $C_{DOAS}$*100, differences between the two systems appeared to be quite systematic among different compounds. While the mode of bias peaked at 0~20% or 20~40% in terms of PD values, the cause of such positive bias mainly arised from generally enhanced concentration values of DOAS system. The structure of bias among different species was further assessed through linear regression analysis. Results of the analysis indicated that the dominant portions of differences observed from two monitoring systems can be accounted for by the systematic differences in their spanning and zeroing systems. S $O_2$(MS2)=0.6385 S $O_2$(DOAS)+2.0985($r^2$=0.7894) N $O_2$(MS2)=0.6548 N $O_2$(DOAS)+7.437($r^2$=0.7687) $O_3$(MS2)=1.0359 $O_3$(DOAS)-7.7885($r^2$=0.7944) The findings of slope values at around 0.64~0.65 from two species suggest that DOAS should respond more sensitively in upper bound concentration range. The offset values apart from zero indicate that more deliberate comparison needs to be made between these monitoring systems. However, based on the existence of strong correlations from at least 8,000 data points for each species of comparison, we were able to conclude that the compatibility of two monitoring systems is highly significant. With the improvement of calibration techniques for the DOAS system. its applicability for routine monitoring of airborne pollutant species is expected to be quite extendable.

  • PDF

조건부 Copula 함수 기반의 월단위 GloSea5 앙상블 예측정보 편의보정 기법과 연계한 일단위 시공간적 상세화 모델 개발 (Development of daily spatio-temporal downscaling model with conditional Copula based bias-correction of GloSea5 monthly ensemble forecasts)

  • 김용탁;김민지;권현한
    • 한국수자원학회논문집
    • /
    • 제54권12호
    • /
    • pp.1317-1328
    • /
    • 2021
  • 본 연구에서는 예측 모델의 정확성이 비교적 높은 월단위의 GloSea5 자료를 기반으로 예측강수량을 편의보정 및 시공간적으로 상세화하여 연속된 일단위 강우량을 모의하고자 하였다. 이를 위하여 GloSea5를 입력자료로 조건부 Copula와 MNHMM 모형을 적용하여 일단위 시계열 강우량 예측정보를 생산할 수 있는 모델링 체계를 제시하였다. 모의결과 동기간의 자료라도 매주 생산되는 결과가 큰 차이를 나타내는 예측강수량의 변동성이 유의하게 개선되었다. 모형 검증에서 모의된 일강수량, 연속강우확률, 연속무강우확률 및 강우일수가 관측자료와 유사한 값으로 모의되는 등 수문모형의 입력자료로써 활용성이 클 것으로 판단된다. 유역 단위에서의 모의된 강수량 계열간의 상관성 차이가 최소 -0.02에서 최대 0.10로 유역의 강우관측소간 상호종속성을 효과적으로 복원되는 등 수문모형의 입력자료로 활용 시 유역의 수문기상학적 반응을 보다 현실적으로 모의가 가능할 것으로 기대된다.

Laser CVD절연막의 전기전도와 절연파괴특성 (The eletrical conduction and breakdown characteristics of thin films by Laser CVD)

  • 강희복;권봉제;김용우;김성진;성영권
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1991년도 하계학술대회 논문집
    • /
    • pp.191-193
    • /
    • 1991
  • In this paper, we introduce silicon dioxide films deposited by Laser CVD, and evaluate the breakdown characteristics of these films by TZDB(Time Zero Dieiectric Breakdown) and TDDB(Time Dependent Dielectric Breakdown) test, failure times against eletric field are examined and accelation factors ${\beta}$ are obtained, and also, long term reliability is described by examining TDDB under positive voltage bias, all the above results are compared with PECVD(Plasma Enhanced CVD) $SiO_2$ breakdown, data, as a result, it is shown that the breakdown characteristics of Laser CVD $SiO_2$ films is improved.

  • PDF

멀티레벨 인버터를 이용한 SRM 운전특성 (Characteristic of SRM Drive using Multi-level Converter)

  • 왕혜군;이상훈;이동희;안진우
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
    • /
    • pp.100-102
    • /
    • 2007
  • In this paper, a modified multi-level convert for low cost high speed switched reluctance (SR) drive is proposed The proposed multi-level converter has reduced number of power switches and diodes than that of a conventional asymmetric converter for SRM, and lower voltage rating of the dump capacitor comparing with energy efficient c-dump converter. It can supply five operating modes that is boosted, DC-link, zero, negative bias and negative boosted voltage. The proposed multi-level converter has fast excitation and demagnetization modes of phase current, so dynamic response can be achieved. The proposed multi-level converter is verified by computer simulation and experimental results.

  • PDF

An analysis of the performance of the KOMPSAT-1 AOCS for the 3 years mission

  • 백현철;김해동;김은규;최해진;이정배;이명신
    • 한국우주과학회:학술대회논문집(한국우주과학회보)
    • /
    • 한국우주과학회 2003년도 한국우주과학회보 제12권2호
    • /
    • pp.100-100
    • /
    • 2003
  • 다목적실용위성 1호의 자세제어는 추력기를 이용한 방법과 반작용 휠을 이용한 방법으로 나눌 수 있다. 추력기를 이용한 방법은 위성이 안전모드에 진입하거나 궤도조정시 이용되며, 정상 운영모드에서 촬영임무를 수행할 때는 반작용 휠을 이용하여 위성의 자세를 제어하고 있다. 자세제어는 제로 모멘텀 바이어스(Zero Momentum Bias)를 이용하여 3축 제어방식을 사용하고 있다. 지구센서(CES, Conical Earth Sensor)와 자이로(Gyro)를 통하여 얻은 자세정보를 이용하여 위성의 탑재컴퓨터에서 제어로직을 수행하면 MDE(Motor Drive Electronic)를 통해 모멘텀을 입력받아 반작용 휠의 회전속도를 변화 시켜 자세제어를 수행한다. 본 논문은 위성의 임무기간 동안 반작용 휠을 이용하여 자세제어를 수행한 결과를 바탕으로 위성의 제로 모멘텀 바이어스를 통한 자세제어계의 변화를 분석하여 향후 연장 임무기간 동안 발생할 수 있는 운영상의 문제점을 확인하고, 이에 대한 조치 방법과 자세제어계의 운영 방안을 제시하고 한다.

  • PDF

PERIOD CHANGES OF 23 FIELD RR LYRAE STARS

  • Rey, Soo-Chang;Lee, Young-Wook
    • Journal of Astronomy and Space Sciences
    • /
    • 제11권2호
    • /
    • pp.154-164
    • /
    • 1994
  • The secular period behavior of 23 field RR Lyrae stars is studied in order to determine if the observed period changes could be attributed, at least in the mean, to stellar evolution. The sample of stars is subdivided into two Oosterhoff groups based on the metallicity and period-shift. Despite the small sample size, we found a distinct bias toward positive period changes in the group II variables. The period changes of the group I variables, however, are small and in the mean near zero. This is consistent with the behavior predicted by the recent evolutionary models, as was the case for the variables in globular clusters. This provides yet another support for the Lee, Demarque, and Zinn (1990) evolutionary models of RR Lyrase stars and their explanation of the Sandage period-shift effect.

  • PDF

A Four-Channel Laser Array with Four 10 Gbps Monolithic EAMs Each Integrated with a DBR Laser

  • Sim, Jae-Sik;Kim, Sung-Bock;Kwon, Yong-Hwan;Baek, Yong-Soon;Ryu, Sang-Wan
    • ETRI Journal
    • /
    • 제28권4호
    • /
    • pp.533-536
    • /
    • 2006
  • A distributed Bragg reflector (DBR) laser and a high speed electroabsorption modulator (EAM) are integrated on the basis of the selective area growth technique. The typical threshold current is 4 to 6 mA, and the side mode suppression ratio is over 40 dB with single mode operation at 1550 nm. The DBR laser exhibits 2.5 to 3.3 mW fiber output power at a laser gain current of 100 mA, and a modulator bias voltage of 0 V. The 3 dB bandwidth is 13 GHz. A 10 Gbps non-return to zero operation with 12 dB extinction ratio is obtained. A four-channel laser array with 100 GHz wavelength spacing was fabricated and its operation at the designed wavelength was confirmed.

  • PDF

선형 보정을 이용한 구난요원의 보폭 추정 알고리즘 (Step Length Estimation Algorithm for Firefighter using Linear Calibration)

  • 이민수;주호진;박찬국;허문범
    • 제어로봇시스템학회논문지
    • /
    • 제19권7호
    • /
    • pp.640-645
    • /
    • 2013
  • This paper presents a step length estimation algorithm for Pedestrian Dead Reckoning using linear calibrated ZUPT (zero velocity update) with a foot mounted IMU. The IMU consists of 3 axis accelerometer, gyro and magnetometer. Attitude of IMU is estimated using an inertial navigation algorithm. To increase accuracy of step length estimation algorithm, we propose a stance detection algorithm and an enhanced ZUPT. The enhanced ZUPT calculates firefighter's step length considering velocity error caused by sensor bias during one step. This algorithm also works efficiently at various motions, such as crawling, sideways and stair stepping. Through experiments, the step length estimation performance of the proposed algorithm is verified.

고온초전도 박막을 이용한 튜너블 이상기의 마이크로파 특성 (Microwave Properties of Tunable Phase Shifter Using High Temperature Superconducting Thin Film)

  • 곽민환;김영태;문승언;류한철;이수재;강광용
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제7권1호
    • /
    • pp.13-16
    • /
    • 2005
  • High temperature superconductor, $\YBa_2Cu_3O_{7-x}$ (YBCO) and ferroelectric, $\Ba_{0.1}Sr_{0.9}TiO_{3}$ (BST) multilayer thin films were deposited using on MgO(100) substrates pulsed laser deposition. The thin films exhibited only (001) peaks of YBCO and 1357 The HTS thin films demonstrated excellent zero resistance temperature of 92.5 K. We designed and fabricated HTS ferroelectric phase shifter using high frequency system simulator and standard photolithography method, respectively The HTS phase shifter shows a low insertion loss (2.97 dB) and large phase change ($\162^{circ}$) with 40 V do bias at 10 GHz. The HTS phase shifter shows 54 of figure of merit. These results can be applicable to phased anay antenna system for satellite communication services.

The Potential Barrier Heights and the Carrier Densities of ZnO Varistors with Various Compositions

  • Cho, Sung-Gurl;Kwak, Min-Hwan;Lee, Sang-Ki;Kim, Hyung-Sik
    • The Korean Journal of Ceramics
    • /
    • 제4권1호
    • /
    • pp.37-42
    • /
    • 1998
  • The barrier heights and carrier densities of ZnO varistors with various compositions were estimated using C-V, J-V and $\rho$-T relations. The barrier heights obtained from C-V and J-V plots were 0.73~5.98 eV and 0.25~2.70 eV, respectively. The carrier densities estimated from C-V plots were ~$10^{18}cm^{-3}$. Acceptable values of the barrier heights and the carrier densities were obtained from $\rho$-1/T curves and the capacitances at zero bias; 0.6~0.8 eV for the barrier heights and ~$10^{17}cm^{-3}$ for carrier densities. Addition of cobalt increased the barrier height and the carrier density, while chromium slightly lowered both of them.

  • PDF