• Title/Summary/Keyword: Zeolite 5A

Search Result 500, Processing Time 0.028 seconds

Quality Characteristics of Unshiu Orange and Pear Packaged with Paper Incorporated with Antimicrobial Agents (항균소재를 함유한 포장재로 포장한 밀감과 배의 저장중 품질 특성 변화)

  • Park, Woo-Po;Jung, Jun-Ho;Cho, Sung-Hwan;Kim, Chul-Hwan
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.33 no.10
    • /
    • pp.1715-1719
    • /
    • 2004
  • In order to help the preservation of the unshiu orange and pear, antimicrobial paper incorporating grapefruit seed extract and zeolite was applied to pack fruits. Unshiu orange was packed in a box (24${\times}$24${\times}$22 cm) attached with antimicrobial paper and then stored respectively at l$0^{\circ}C$. Pears were wrapped individually before storage at l$0^{\circ}C$. During the storage, weight loss, pH, total acidity, soluble solid content, microbial load and decay were measured as quality indices. Steady pH increase in unshiu orange was observed to slightly decrease total acidity during the storage with little difference between the packaging treatments. The microbial loads of total aerobic bacteria, and yeast/mold counts were suppressed during storage by the antimicrobial paper packaging, which also contributed to reducing the decayed unshiu orange. Limited reduction of total aerobic bacteria and yeast/mold counts was observed only for initial storage period for the pears wrapped with 9 and 12% antimicrobial agent-added papers. Antimicrobial paper was useful for the reduction of microbial load in unshiu orange and pear without other quality deterioration.

Experimental Study on the Mitigation of Harmful Algal Blooms by Mono-Minerals (환경친화성 단일 광물질에 의한 적조구제 실험)

  • 장영남;채수천;배인국;박맹언;김필근;김선옥
    • Economic and Environmental Geology
    • /
    • v.36 no.6
    • /
    • pp.557-561
    • /
    • 2003
  • It is important to find out a new material having high removal efficiency for the harmful algal blooms because the dispersion of Hwangto in a large amount to the sea water may bring some ecologically unfavorable problems. For this purpose, the efficiency of several natural and synthetic mineral species for the mitigation of algal blooms was measured. The mixing ratio of monominerals and the sea water with 3,000∼5,000 cells/$m\ell$ of Cochlodinium polykrikoides was 10 g/${\ell}$ and the removal ratio was measured by counting the living cells after the dispersion time of 10, 30 and 60 min., respectively. According to the experimental results, the removal ratio by illite, kaolinite, montmonmorillonite, red mud, Na-A type of zeolite ranged 84-92% after 1hr of contact time, which is comparable to that of Hwangto. The size of above monominerals ranged 3∼50${\mu}m$. Meanwhile, the amorphose material and hematite with the size of 50∼100 nm showed excellent removal ratio of more than 99% after 30min. of dispersion. The results of the study showed that the removal ratio was not related to the chemical composition and pH of the minerals applied but to the grain size. The experimental results strongly suggest that the main mitigation mechanism would be the contact and coagulation.

Formation Processes of Fault Gouges and their K-Ar Ages along the Dongnae Fault (동래단층 지역 단층비지의 생성과정과 K-Ar 연령)

  • 장태우;추창오
    • The Journal of Engineering Geology
    • /
    • v.8 no.2
    • /
    • pp.175-188
    • /
    • 1998
  • This paper describes the internal structures and K-Ar ages of fault gouges collected from the Dongnae fault zone. This fault zone is internally zoned and occurs in the multiple fault cores. A fault core consists of thin gouge and narrow cataclastic zones that are bounded by a much thicker damage zone. Intensity of deformation and alteration increases from damage zone through cataclastic zone to gouge zone. It is thought that cataclasis of brittle deformation was the dominant strain-accomodation mechanism in the early stage of deformation to form the gouge zone and that crushed materials in the regions of maximum localization of fault slip subsequently moved by cataclastic flow. Deformation mechanism drastically changed from brittle processes to fluid-assisted flow along the gouge zone as the high porosity and permeability of pulverzied materials during faulting facilitated the influx of the hydrothermal fluids. Subsequently, the fluids reacted with gouge materials to form clay minerals. Fracturing and alteration could have repeatedly taken place in the gouge zone by elevated fluid pressures generated from the reduction of pore volume due to the formation of clay minerals and precipitation of other materials. XRD analysis revealed that the most common clay minerals of the gouge zones are illite and smectite with minor zeolite and kaolinite. Most of illites are composed of 1Md polytype, indicating the products of hydrothermal alteration. The major activities of the Dongnae fault can be divided into two periods based upon K-Ar age data of the fault gouges : 51.4∼57.5Ma and 40.3∼43.6Ma. Judging from the enviromental condition of clay mineral formation, it is inferred that the hydrothermal alteration of older period occured at higher temperature than that of younger period.

  • PDF

A Study on the Low Concentration Carbon Dioxide Adsorbent and Optimal Conditions (저농도 이산화탄소 포집용 흡착제 개발 및 최적조건에 관한 연구)

  • Lee, Ju-Yeol;Park, Duck-Shin;Cho, Young-Min;Kwon, Soon-Park;Hwang, Yoon-Ho;Song, Hyung-Jin;Lee, Sang-Bong
    • Journal of the Korean Applied Science and Technology
    • /
    • v.29 no.1
    • /
    • pp.1-12
    • /
    • 2012
  • In this study, $CO_2$ adsorbent was developed for removing low concentration of $CO_2$ in multiple-use facilities. The efficiency of the adsorbent which was improved selective $CO_2$ adsorption capabilities was evaluated. The pellet type adsorbent was modified from a commercial zeolite with mixing LiOH, binder, additives, and $H_2O$. Column tests showed over 90 % of $CO_2$ was adsorbed within 400min. Chamber tests including batch and continuous types were performed for evaluating the adsorbent module. By batch tests, it was evaluated that about 92% of $CO_2$ was removed within 30 min. By continuous tests, 70% of $CO_2$ was removed within 30 min. It was analyzed that over 2,500 ppm of $CO_2$ was continuously removed as shown chamber tests. The reproducibility tests repeatedly performed for 15 days shows that over 1,000 ppm of $CO_2$ was continuously removed. Adsorption capacity of the developed adsorbent was 5.0mmol $CO_2/g$ adsorbent which was analyzed by TGA. It was estimated that the modified adsorbent was applicable to low $CO_2$ concentration and low temperature of indoor environment.

A Study on the Methanation of Carbon Dioxide over Ni/Y-type Zeolites (Y형 제올라이트 담지 니켈촉매상에서 이산화탄소의 메탄화반응)

  • Lee, Kwan-Yong;Kim, Hyung-Wook;Kim, Geon-Joong;Ahn, Wha-Seung
    • Applied Chemistry for Engineering
    • /
    • v.4 no.2
    • /
    • pp.365-372
    • /
    • 1993
  • $CO_2$ methanation was performed over Ni supported on cation-exchanged Y zeolites under atmospheric pressure at $250{\sim}550^{\circ}C$ and $H_2/CO_2$ mole ratio of 4. Adsorption strength between carbon dioxide and nickel was found to be Influenced by the cation exchanged in the zeolite. TPD(Temperature-programmed desorption) results show that the adsorption strength decreases in the order of Ni/NaY>Ni/MaY>Ni/HY. TPSR(Temperature-programmed surface reaction) results indicate that enhanced methanation activity is obtained when the adsorption strength between carbon dioxide and nickel is stroing. As the reduction temperature increases, the methantion activity of the catalyst increase. From this result the larger size nickel particle seems advantageous for $CO_2$ methanation reaction. The maximum activity is obtained when nickel loading is 3.3wt%. Carbon monoxide is produced as a by-product throughout the reaction temperature range, and as the contact time increases, the selectivity to methane increases and the selectivity to carbon monoxide decreases steadily. Thus methane seems to be produced from $CO_2$ via CO as an intermediate species. In the temperature range of $410{\sim}450^{\circ}C$, the methane production rate is found to be dependent on the orders of 3.3~-0.5 and 1.4~3.6 with respect to $CO_2$ and $H_2$ partial pressures, respectively. This clearly shows that $CO_2$ and $H_2$ are competing for adsorption sites and as the reaction temperature increases, it becomes increasingly difficult for $H_2$ to be adsorbed on the catalyst surface.

  • PDF

Synthesis of Single Crystalline Analcime and Its Single-crystal Structure, |Na0.94(H2O)|[Si2.06Al0.94O6]-ANA: Determination of Cation Sites, Water Positions, and Si/Al Ratios (결정성 아날심(|Na0.94(H2O)|[Si2.06Al0.94O6]-ANA)의 합성 및 단결정구조: 양이온 및 물 분자의 위치, Si/Al 비의 결정)

  • Seo, Sung-Man;Suh, Jeong-Min;Ko, Seong-Oon;Lim, Woo-Taik
    • Journal of the Korean Chemical Society
    • /
    • v.55 no.4
    • /
    • pp.570-574
    • /
    • 2011
  • Large colorless single crystals of analcime with diameters up to 0.20 mm have been synthesized from gels with the composition of $3.00SiO_2$ : $1.50NaAlO_2$ : 8.02NaOH : $454H_2O$ : 5.00TEA. The fully $Na^+$-exchanged analcime have been prepared with aqueous 0.1 M NaCl (pH adjusted from 6 to 11 by dropwise addition of NaOH). The single-crystal structure of hydrated $|Na_{0.94}(H_2O)|[Si_{2.06}Al_{0.94}O_6]$-ANA per unit cell, a=13.703(3) ${\AA}$, has been determined by single-crystal X-ray diffraction technique in the orthorhombic space group Ibca at 294 K. The structure was refined using all intenties to the final error indices (using only the 1,446 reflections for which $F_o$ > $4{\sigma}(F_o))R_1/wR_2$ = 0.054/0.143. About 15 $Na^+$ ions are located at three nonequivalent positions and octahedrally coordinated. The chemical composition is $Na_{0.94}(H_2O)Si_{2.06}Al_{0.94}O_6$. The Si/Al ratio of synthetic analcime is 2.19 determined by the occupations of cations, 14.79, in the single-crystal determination work.

Physical properties, released patterns and bio-efficacy of granular mixtures with chlomethoxyfen and butachlor formulated by different methods (제조방식을 달리한 chlomethoxyfen과 butachlor 혼합입제의 물리성, 수중용출도와 생물효과 비교)

  • Chung, Bong-Jin;Yeon, Jae-Heum
    • The Korean Journal of Pesticide Science
    • /
    • v.2 no.3
    • /
    • pp.36-44
    • /
    • 1998
  • To develope cost-effective new granular formulation of mixture with 7.0% chlomethoxyfen and 3.5% butachlor, this study was conducted by investigation of floatability, dispersibility or collapsability and released concentration of active ingredients in water and bio-efficacies of the granules formulated by different formulation methods compared to commercial pellet-extruded granules. They were formulated by coating on or impregnation into extruded pellets, sands and zeolites with two active ingredients, binders, friction reducer, dispersing agents and bentonite. Pellet-coated method showed similar floatability, collapsability and bio-efficacy to the commercial pellet-extruded one or better than that but unstable patterns of released concentration of chlomethoxyfen because of easy isolation of coated technical particles from the surface of granules. Sand-coated methods showed similar physical properties, released pattern of two active ingredients, and bio-efficacy to the commercial one. Liquid binders and/or dispersing agents are more important than powdered ones to control released concentration of active ingredients from the granule mixtures, to improve the floatability and dispersibility, and to show good bio-efficacy. Sand-coated one might be a suitable method if types and amount of liquid binders and dispersing agents are selected.

  • PDF

Modified Atmosphere Packaging of Peaches (Prunus persica L. Batsch) for Distribution at Ambient Temperature (복숭아의 상온유통을 위한 기능성 포장기법)

  • Park, Jong-Dae;Hong, Seok-In;Park, Hyung-Woo;Kim, Dong-Man
    • Korean Journal of Food Science and Technology
    • /
    • v.31 no.5
    • /
    • pp.1227-1234
    • /
    • 1999
  • Modified atmosphere packaging of peaches(Prunus persica L. Batsch) was investigated to extend their freshness during distribution. Peaches were packaged in the PE film(20LD, 40LD), the PE film modified by addition of 5%(w/w) zeolite(20CK, 40CK), and the PE film containing $Purafil^{\circledR}$ sachet(20LP, 40LP). Quality indexes of peaches during storage at $20^{\circ}C$ were measured in terms of weight loss, soluble solids content, pH, titratable activity, firmness, color and sensory properties. Gas composition and ethylene content In the film bags changed rapidly at the early stage of storage. Within 8 days, weight loss of the unpacked control increased upto ll.8% but those of the packaged remained below 2%. There was no significant difference in soluble solids content and pH in all the treatments. Ethanol content of peaches packed in 40LD was 12.88 mL/kg and acetaldehyde content in 40CK was $160\;{\mu}L/kg$ for 8 days. Peaches packed in 20CK showed a good visual and sensory Quality. The result suggested that active packaging treatment such as 20CK could be used for extending freshness of peaches during transport period at ambient temperature.

  • PDF

Development of $O_2$ Purifier by Pressure Swing Adsorption Process (고순도 산소 생산을 위한 산소 정제 PSA 공정 개발)

  • Lee Chang-Ha;Jee Jeong-Geun;Lee Sang-Jin;Moon Heung-Man;Lee Sang-Hoon
    • Journal of the Korean Institute of Gas
    • /
    • v.8 no.1 s.22
    • /
    • pp.37-47
    • /
    • 2004
  • Pressure swing adsorption (PSA) process using CMS as an oxygen purifier was developed to produce high purity oxygen over $99\%$ with high productivity. The cyclic performances such as purity, recovery, and productivity of PSA process were compared experimentally and theoretically under the non-isothermal condition. A binary ($O_2$/Ar 95:5 vol.$\%$) and two kinds of ternary ($O_2/Ar/N_2$ 95:4:1 and 90:4:6 vol.$\%$) mixtures were used as feed gases. The developed process with the consecutive two blowdown steps produced the oxygen with $99.8\%$ purity and $56\%$ recovery from $95\%$ oxygen containing feed. However, in the feed with $90\%$ oxygen, the $O_2$ Purity was decreased up to $97.3\%$. In addition, because the cyclic performances of the suggested process was significantly affected by the diffusion rate, the non-isothermal model with the the modified LDF model was applied for the process simulation. The concentration-dependent rate parameter of the applied rate model was incorporated with the Langmuir isotherm.

  • PDF

Safe and easy disposal of prochloraz wastewaters after used as rice seed disinfectant (벼 종자소독 후 prochloraz 폐액의 안전 폐기 방법)

  • Park, Byung-Jun;Choi, Ju-Hyeon;Kim, Chan-Sub;Lee, Byung-Moo;Ihm, Yang-Bin;Cho, Il-Kyu
    • The Korean Journal of Pesticide Science
    • /
    • v.7 no.3
    • /
    • pp.169-175
    • /
    • 2003
  • For safe and easy disposal of prochloraz wastewaters after used as rice seed disinfectant in Korean farms, this experiment was carried out. By addition of several agricultural materials commonly utilizing in farmers, removal effect of prochloraz from waste solution was also investigated. When rice seeds after soaking in diluted prochloraz solution were rinsed with water several times, prochloraz was removed $9.2\sim10.6%$ at the first rinse and less than 3 % at the fourth rinse. A half life of prochloraz was $4\sim5$ days in aqueous system. Hydrolysis of prochloraz was more rapidly in alkali solution than neutral and acidic one at $25^{\circ}C$ and $35^{\circ}C$. By the irradiation under $5530J/cm^2$ using xenone lamp, prochloraz was photo-degraded to 87.7% in aqueous system. The removal efficiency of prochloraz by addition of several agricultural materials were as follows: 93.6% by lime, 90.7% by composed pig manure, 89.4% by activated charcoal, 78.0% by straw ash, 70.3% by sandy loam soil, 47.0% by zeolite and 24.1 % by rice straw. When prochloraz solution was sprayed on the field soil, it was dissipated upto 90% within 35 days.