• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2000년도 춘계학술강연 및 발표대회 강연 및 발표논문 초록집
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

• Journal of Preventive Medicine and Public Health
• /
• 제30권4호
• /
• pp.741-751
• /
• 1997

Measurement of blood lead (PbB) and blood zinc protoporphyrin (ZPP) are most common biological indices to identify the individual at risk for excess or the health sequences by lead exposure. Because PbB is known most important and reliable index of lead exposure, PbB is often regarded as a gold standard to detect lead exposure. But in Korea PbB is a secondary test item of detailed health check-up with positive finding of screening test in most occasion. Our lead standard requires all lead workers to take annual heath-check twice a year for investigation of their health effect due to lead exposure. Blood ZPP is one of most important index to detect high lead absorption in lead workers as a screening test. Measurement of blood ZPP is known ,well to correlate with PbB in steady state of exposure in most lead workers and is often used as a primary screening test to detect high lead absorption of lead workers with the advantage of simplicity, easiness, portability and low cost. The current cut-off criteria of blood ZPP for further detailed health check-up is $100{\mu}g/d\ell$ which is supposed to match the level of $40{\mu}g/d\ell$ of PbB according to our standard. Authors tried to investigate the validity of current criteria of cut-off level $(100{\mu}g/d\ell)$ of blood ZPP and possible another better cut-off level of it to detect the lead workers whose PbB level over $40{\mu}g/d\ell$. The subjects in our study were 212 male workers in three small scale storage battery industries. Blood ZPP, PbB and hemoglobin (Hb) were selected as the indices of lead exposure. The results were as follows. 1. The mean of blood ZPP, PbB and Hb in lead workers were $79.5{\pm}46.7{\mu}g/d\ell,\;38.7{\pm}15.1{\mu}g/d\ell,\;and\;14.8{\pm}1.2g/d\ell$, respectively. There were significant differences in blood ZPP, PbB and Hb by industry (P<0.01). 2. The percents of lead workers whose blood ZPP were above $100{\mu}g/d\ell$ in the group of work duration below 1, 1-4, 5-9 and above 10 years were 8.6%, 17.2%, 47.6%, and 50.0%, respectively. The percents of lead workers whose PbB were above $40{\mu}g/d\ell$ in those were 31.4%, 40.4%, 71.4%, and 86.4%, respectively. 3. The percents of lead workers whose PbB were below $40{\mu}g/d\ell$, $40-59{\mu}g/d\ell$ and above $60{\mu}g/d\ell$ were 54.7%, 34.9% and 10.4%, respectively. Those of lead workers whose blood ZPP were below $100{\mu}g/d\ell$, $100-149{\mu}g/d\ell$ and above $150{\mu}g/d\ell$ were 79.2%, 13.7% and 7.1%, respectively. 4. Simple linear regression of PbB on blood ZPP was statistically significant (P<0.01) and as PbB was $40{\mu}g/d\ell$, blood ZPP was $82.1{\mu}g/d\ell$. 5. While the highest sensitivity and specificity of blood ZPP test to detect lead workers with PbB eve. $40{\mu}g/d\ell$ were observed in the cut-off level of $50{\mu}g/d\ell$ and $100{\mu}g/d\ell$ of blood ZPP, respectively, the highest validity (sensitivity+specificity) of blood ZPP to detect lead workers with PbB over $40{\mu}g/d\ell$ was observed in the cut-off level of around $70{\mu}g/d\ell$ of blood ZPP. But even with optimal cut-off level of around $70{\mu}g/d\ell$ of blood ZPP, still 25.0% of false negative and 20.7% false positive lead workers were found. As the result of this study, it was suggested that reconsideration of current blood ZPP cut-off of our lead standard from $100{\mu}g/d\ell$ to somewhat lower level such as around $70{\mu}g/d\ell$ and the inclusion of PbB measurement as a primary screening test for lead workers was highly recommended for the effective prevention of lead workers.

• Journal of Nutrition and Health
• /
• 제35권3호
• /
• pp.291-295
• /
• 2002

SD계 흰쥐를 사용하여 평균적으로 하루에 솔잎 추출물의 BuOH 획분을 25, 50, 100mg/kg BW가 섭취하도록 사료에 첨가하여 45일 동안 투여하였다. BuOH-25 투여그룹을 제외한 BuOH-5- 및 BuOH-100 투여그룹의 mitochondria 및 microsomes은 대조그룹 대비 11.6%, 20.1% 및 10.5%, 13.5%의 매우 유의적인 간장 내 콜레스테롤 침착 억제효과가 인정되었다. BuOH-25, BuOH-50, BuOH-100 투여그룹의 mitochondria에서는 대조그룹 대비 2.9%, 13.3%, 18.5%의 .OH 라디칼 억제효과로서 BuOH-5- 및 Bu-OH-100 투여그룹에서 높은 유의성이 인정되었으며, microsome에서는 대조그룹 대비 15.7%, 20.0%, 20.6%의 매우 효과적인 .OH 라디칼의 생성 억제효과가 인정되었다. 또한 BuOH-25, BuOH-50, BuOH-100 투여그룹의 간장 cytosol 획분에서는 대조그룹 대비 5.2%, 8.0%, 11.1%의 $O_2$라디칼의 생성 억제효과로서 BuOH-50 및 BuOH-100 투여 그룹에서 유의성이 인정되었다. 간장 mitochondria 획분에서 BuOH-25, BuOH-50, BuOH-100 투여그룹의 Cu/Zn-SOD 활성은 대조그룹 대비 각각 4.6%, 10.3%, 15.9%의 Cu/Zn-SOD 활성 증가효과로서 BuOH-50 및 BuOH-100 투여그룹에서 유의성이 인정되었지만, Mn-SOD 활성은 세가지 BuOH 투여그룹의 유의성은 나타나지 않았다. BuOH-25, BuOH-50, BuOH-100 투여그룹의 간장 cytosol 획분에서는 대조그룹 대비 각각 9.0%, 19.4%, 25.6%의 매우 유의적인 GPx 활성 증가효과가 인정되었다. 따라서 솔잎의 BuOH 획분은 조직의 콜레스테롤의 침착을 효과적으로 억제효과할 뿐만 아니라 활성산소의 생성을 유의적으로 억제하고 제거 효소의 활성을 증가시킴으로써 노화과정을 효과적으로 억제할 수 있을 것으로 기대된다.

• 한국식품위생안전성학회지
• /
• 제15권4호
• /
• pp.328-333
• /
• 2000

1998년 9월부터 1999년 7월까지 통영시내 약수터 9개 지점에서 약수륵 채수하여 90개 시료에 대한 화학적 및 세균학적 수질을 조사하였다. 그결과 각 항목의 범위와 중앙치는 다음과 같다. 수온은 5.2~25.8, 16.3$^{\circ}C$, pH 6.0~7.2, 6.7, 총잔류물질 33.6~210, 90.6 mg/1, 탁도 0.35~5.48, 1.45NTU, 과망간산소비량 0.51~4.21, 1.39mg/1, 염소이온 6.23~42.5, 16.7mg/1, 인산염 불검출~0.04, 0.02mg/1, 아질산염 불검출~0.02, 0.01 mg/1, 질산염 불검출~3.56, 1.42 mg/1, 암모니성질소 불검출~0.20, 0.14mg/1, 용존질소 불검출~3.78, 1.57mg/1로 나타났다. 심미적 영향물직에서 철은 0.04~0.28, 0.13ppm, 아연 0.03~0.66, 0.20ppm, 망간 불검출~0.01, 알루미늄 0.14~0.58, 0.39ppm, 구리 불길출~0.01, 0.01로 조사되었다. 유해금속에서 납은 불검출~0.01, 0.01 ppm, 비소 불검출~0.01, 0.01ppm, 수은 불검출~0.02, 불검출 크롬 불검출, 카드뮴 불검출로 각각 나타났다. 생균수는 5.0~760/m1, 중앙치 130/m1으로 기준치 100/m1륵 다소상회하였다. 대장균군 및 분변계대장균군의 범위와 중앙치는 0~2,400, 73 MPN/100ml 와 0~540, 21MPN/100ml로 조사되어 기준치 음성/50m1를 초과하고 있었다. IMViC 시험에 의한 대장균군은 분리된 45주중에 Escherichia group이 33.3%, Citrobacter freunidii freundii 15.6%, Klebsiella aerogenes 35.6%, 기타 15.5%로 나타났다.

• 한국식품저장유통학회지
• /
• 제25권1호
• /
• pp.136-144
• /
• 2018

본 연구는 갈색거저리 동충하초 열수 추출물의 유산균 발효에 따른 항산화 활성에 대해 연구하였다. 갈색거저리 동충하초의 열수 추출물과 주정 농도별 추출물의 DPPH 자유 라디칼 소거 활성을 측정한 결과 열수 추출물이 74.81 EDA%로 가장 높았고 $80^{\circ}C$에서 30분 추출이 76.49 EDA%로 가장 높은 활성을 보였다. 7가지 프로바이오틱스 유산균주를 갈색거저리 동충하초 열수 추출물에 첨가하여 배양 시간별로 DPPH 자유 라디칼 소거 활성을 측정한 결과는 S. thermophilus 균주가 배양 6시간째 80.01 EDA%로 가장 높게 나타나 갈색거저리 동충하초 발효 우수 균주로 최종 선정하였다. 갈색 거저리 동충하초 열수 추출물의 유산균 발효 전 후 일반성분 조성 변화는 수분이 $85.27{\rightarrow}68.54%$로 감소하였고, 조단백질은 $2.97{\rightarrow}3.56%$, 조지방은 $0.32{\rightarrow}1.08%$로 증가하였다. 무기성분은 K가 5.92 mg%로 가장 높은 함량을 보였고, Na, Mg, Ca 및 Zn 모두 발효 후 증가하였으며, 총 유리아미노산 함량은 물 추출물 10,221.02 mg%, 유산균 발효물 9,458.66 mg%로 물 추출물의 함량이 더 높게 나타났다. 갈색거저리 동충하초의 지표물질로 알려진 cordycepin은 발효를 통해 7.02 mg%에서 8.66 mg%로 증가하였다. 발효 전 후에 따른 색도를 측정한 결과 발효 후 a 값은 $66.72{\rightarrow}149.92$로 증가 하였고, L 값과 b 값은 각각 $15.79{\rightarrow}-15.75$, $54.45{\rightarrow}0.01$로 발효 후 감소하였다. 갈색거저리 동충하초 열수 추출물의 유산균 발효에 따른 DPPH 자유라디칼 소거능을 측정한 결과 발효 전 84.69 EDA%에서 발효 후 91.92 EDA%로 증가 하였으며, $ABTS^+$ 자유 라디칼 소거 활성과 SOD 활성 또한 발효 후 증가하는 것을 확인하였다.

• 한국산업보건학회지
• /
• 제11권2호
• /
• pp.111-117
• /
• 2001

A cross-sectional study was performed to evaluate associations between lead biomarkers, lead-related symptoms, and ${\delta}$-aminolevulinic acid dehydratase (ALAD) genotype among 598 lead workers and 144 control office workers in storage battery industries, secondary smelting and litharge making industries. Lead inhibits the second enzymes, ALAD, in the heme synthesis pathway. ALAD gene, which codes for one of three isozymic proteins (termed ALAD1-1, ALAD1-2, and ALAD2-2), seems to modify the toxicokinetics of lead. The result as follows; The percents of total workers whose genotype of ALAD1-1 and ALAD1-2 were 88.4% and 11.6%, respectively. The zinc protoporphyrin in blood (ZPP) and ${\delta}$-aminolevulinic acid in urine (ALAU) of lead workers with ALAD1-2 were significantly lower than those of lead workers with ALAD1-1, but there were no significant difference between two genotype for blood lead, age, and work duration. The proportion of ALAD1-2 genotype in control office workers was 13.2%. The proportions of ALAD1-2 genotype of lead workers were 14.0%(their mean air lead level below $0.024mg/m^3$), 10.4%($0.025-0.049mg/m^3$), 11.8%($0.050-0.099mg/m^3$), and 9.4%(above $0.100mg/m^3$), respectively. In the logistic analysis of 15 lead related symptoms, 'arthralgia'(S7) symptom of ALAD1-2 was significantly lower (OR=0.481; 95% CI=0.248-0.932) than that of ALAD1-1, but 'feeling of irritation'(S11) of ALAD1-2 was significantly higher(OR=1.636; 95% CI=1.035-2.586) than that of ALAD1-1 after controlling possible confounder (blood lead, work duration, smoking and drinking habit).

• Asian-Australasian Journal of Animal Sciences
• /
• 제16권4호
• /
• pp.519-528
• /
• 2003

A survey was conducted in certain parts of Haryana to record the prevalence of micro mineral deficiency in buffaloes. The prevalence of soil Cu, Co, Zn and Fe deficiency was 55.26%, 6.9%, 59.12% and 7.89% respectively. While that of fodder Cu, Co, Zn and Fe was 60.64%, 6.7%, 61.22% and 11.37% respectively. The overall prevalence of serum Cu, Co, Zn and Fe deficiency in Haryana was 59.2%, 19.1%, 59.2% and 19.9% respectively. The correlation co-efficient of Cu, Co, Zn and Fe in soil, fodder and serum was significant in most of the cases the values were above 0.8. Blood examination revealed significant decrease in haemoglobin and TEC level. However, no variation in level of TLC were observed in mineral deficient buffaloes. In micro mineral deficiency, thyroid hormone (T3 and T4) levels were decreased in buffaloes. Marginally lower concentration of vitamin A and E were observed in mineral deficient buffaloes in Haryana. The highest deficiency of micro minerals was 61.76% in copper at Ambala followed by 65.86% in zinc at Rhotak. For therapeutic studies a mineral mixture was prepared according to defiency obtained and fed to three groups of animals. Observation was recorded on 0, 15, 30, 45 and 60 days. Group A consist of normal healthy animals and group B mineral deficient animal untreated and group C mineral deficient animal, treated with prepared mineral mixture. 25 gram of mineral mixture was fed daily along with normal ration. There was increase in body weight, milk yield, haemoglobin concentration and total erythrocyte level in group C animals when compared to group B animals. The milk yield in group C animals increased to 6.970${\pm}$0.41 after 60th day of supplement in comparison to 0 day where it was 5.910${\pm}$0.37, similarly the body wt. of group C animals increased from 129.42${\pm}$01.13 (at 0 day) to 159.31${\pm}$03.61 at 60th day of treatment.

• 동아시아식생활학회지
• /
• 제14권2호
• /
• pp.113-122
• /
• 2004

This study was conducted to examine the correlation among growth development, bone mineral density, and nutrient intakes in preschool children. A total of 62 preschool children measured the anthropometric characteristics and the bone mineral density of carpus using DEXA. The questionnaires categorized to determine health status, life style, dietary behaviors, and dietary intakes were filled out by children's mothers. The average ages of the study subjects were 62.4 months in boys and 62.1 months in girls. The birth height and weight of the subjects were 50.9 cm and 3.4 kg in boys and 50.3 cm and 3.3 kg in girls, respectively. The average height, weight, % body fat, and obesity index were 111.7 cm, 19.6 kg, 15.0%, -2.1% in boys and 109.4 cm, 18.7 kg, 17.5%, 0.2% in girls, respectively. The bone mineral density in carpus was 0.25 g/cm$^2$ in boys and 0.24 g/cm$^2$. In girls. Proportions of children having regular meals were 69.0%, 94.7%, and 69.0% for breakfast, lunch, and dinner, respectively. The major reasons for irregular meal were poor appetite and lack of time for breakfast and snacks for dinner. Most of the children(52.6%) had breakfast with the whole family together, and all the children had lunch and dinner with a part of the family. Most of the children answered they had snack more than once a day, and 64.3% had an unbalanced diet. The intakes of energy, calcium, iron, zinc, vitamin A, vitamin B$_1$, niacin, and vitamin C did not meet the Korean RDAs. Average bone mineral density in carpus was positively correlated to the body weight, the total body water, the lean body mass, and the obesity index, respectively(p＜0.01, p＜0.01, p＜0.01 and p＜0.01). The body weight, the total body water, and the lean body mass showed the significant negative correlations with the animal iron intake(p＜0.05, p＜0.01 and p＜0.01). The bone mineral density in the distal carpus was negatively correlated to the animal protein intake and the animal iron intake(p＜0.05 and p＜0.05). And the bone mineral density in the ultradis carpus and the average bone mineral density in the carpus were positively correlated to the plant calcium intake(p＜0.05 and p＜0.05). Therefore, more systematic studies to investigate the roles of protein, iron, and calcium in growth development of preschool children were required.

• 한국지구과학회지
• /
• 제24권7호
• /
• pp.635-649
• /
• 2003

마산만의 오염과정을 파악하기 위하여 3개 정점의 코어 퇴적물에서 중금속 함량과 저서성 유공충의 분포를 조사하였다. 마산만의 퇴적속도는 마산항 0.33 cm/yr, 덕동 하수종말 처리장 앞 0.20 cm/yr, 마산만 입구 0.33 cm/yr로 나타났다. 퇴적물 깊이 약 15 cm부터 표층까지 Cu, Zn, Pb 함량이 뚜렷하게 증가하는 것은 1940년대 이후 점진적으로 축적되던 오염물질이 1960년대 이후 산업폐기물에 의해 급격하게 증가했기 때문인 것으로 해석된다. 코어 퇴적물에서 나타나는 저서성 유공충의 수직적인 분포는 오염에 따른 유공충의 반응을 잘 나타내고 있다. 퇴적물 상부로 중금속 함량이 증가함에 따라 개체수와 종 다양성은 감소하고 사질유공충의 비율은 증가하였다. 이러한 현상은 오염이 증가함에 따라 몇몇 내성종들 만이 존재함으로써 결과적으로 종 다양성이 감소하였음을 반영한다. 기회종인 Eggerella advena와 Trochammina pacifica는 오염퇴적물에서 뚜렷한 증가를 보였다. 이러한 종들은 마산만의 현생 오염 환경을 평가할 수 있는 유용한 환경 지시자로 사용될 수 있을 것이다.

• 대한지역사회영양학회지
• /
• 제10권5호
• /
• pp.603-614
• /
• 2005

This study was performed to investigate the correlation between Premenstrual syndrome (PMS) and nutritional intake, blood composition of female students. One hundred and one female students were selected as the experimental subjects at Gyeongsang National University. To assess the PMS symptoms of the subjects, a questionnaire (PAP) score based on the methods of Halbreich, Endicor and Nee was prepared with 34 different items. Dietary survey was conducted by 24­hour recall method for 3 days and nutrient intakes were analyzed by the CAN-Pro. Blood composition of WBC, RBC, Hb, Hct, Ca and Mg was measured. The average height, weight and BMI of subjects were $160.7\pm4.6cm,\;54.1\pm5.7kg\;and\;21.2\pm1.9$, respectively. Average intakes of energy, calcium, iron, zinc, vit $B_2$, and folic acid per day were $1810.2\pm344.9kcal(90.5\%\;of\;RDA),\;621.1\;197.3mg(88.7\%\;of\;RDA),\;15.9\;pm4.9mg\;(99.3\%\;of\;RDA),\;8.1\pm3.4mg(80.5\%\;of\;RDA),\;1.1\pm0.6mg(88.3\%\;of\;RDA)\;and\;234.3\pm78.6{\mu}g(93.7\%\;of\;RDA)$, respectively. Score of the behavioral symptoms, psychologic symptoms, physical symptoms and other symptoms were recorded $1.79\pm0.86,\;2.11\pm1.08,\;2.31\pm1.11\;and\;1.58\pm0.86$, respectively. The relation between PMS and menstrual cramps was significant. A significant difference was observed for menstruation amount in physical symptoms (p<0.05) and other scores (p<0.05). The group who drinks alcohol over 30g per day showed higher scores at total PAP (p<0.05), psychologic symptoms (p<0.05), physical symptoms (p<0.05), and other scores (p<0.05) than those who don't drink alcohol. Calcium in the blood showed a negative correlation with total PAF score (p<0.05), behavioral symptoms (p<0.05), physical symptoms (p<0.05) and other scores (p<0.01). Magnesium in the blood showed a negative correlation with physical symptoms (p<0.05), other score (p<0.05). WBC was negatively associated with psychologic scores (p<0.05). Hb and Hct were negatively associated with other scores (p<0.05). In conclusion, calcium intake showed a level of $88.7\%$ of RDA and this study revealed that there is a correlation between PMS and blood composition in female college students. Therefore, calcium and magnesium supplements can be beneficial to relieve PMS symptoms.