• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.9
• /
• pp.2120-2126
• /
• 2010

This paper aims to realize the location tracking system using the Zigbee in the wireless sensor network. The wireless sensor network offers the user-oriented location tracking service in the ubiquitous environment. The location tracking service can track the location of an object or a person and provides it. The location tracking system realized in this paper can be used inside or outside without any black-out areas to measure the location of the moving nodes. In tracking inside the RSSI signals use and in tracking outside will connect with the GPS signals to track the location. Also, by using Zigbee, the wireless sensor network environment was established and by obtaining the location of the moving nodes, the real-time tracking is possible.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.2 no.4
• /
• pp.73-80
• /
• 2009

In this paper, we implemented the integrated gateway for health care and home network system based on PLC(Power Line Communication) and Zigbee. The designed system is consists of sensors, integrated gateway, Zigbee module and PLC modem. The integrated gateway will transmit the data which is collected by health care sensors to health care control system and control an appliance for comfortable environment to medical facilities. The implemented gateway can support various health care and home network service.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2017.07a
• /
• pp.162-163
• /
• 2017

IoT 기술의 발달로 지능적 관계를 형성하는 사물 공간 연결망으로 다양한 산업분야에 활용되고 있으며, IoT 시스템을 구축하기 위한 무선 통신 기술들도 연구되고 있다. Zigbee는 대표적인 무선 통신 표준 기술로 IoT의 Smart Home, Smart Led와 같은 분야에서 활용되고 있다. Zigbee 장비의 commissioning 기법은 사용자를 고려한 IoT 환경에서는 해결해야 할 과제이며, RSSI를 통하여 각각의 장비를 식별돼야 할 필요성이 있다. 본 논문에서는 RSSI 신호세기를 필터를 통하여 정렬하는 Zigbee Commissioning 기법을 제안한다.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.203-204
• /
• 2007

BACnet (Building Automation and Control Networks) 은 빌딩 자동화와 컨트롤 시스템 전용의 표준 데이터 커뮤니케이션 시스템이다. BACnet은 현재 데이터링크 레이어의 전송 미디어로 5개의 유선 프로토콜을 제공하고 있다. 최근 건물 통신망에 무선 기술에 대한 수요 및 필요성이 높아지고 있다. Zigbee 는 IEEE 802.15.4를 기반으로 한 저 전력 무선 통신의 표준 프로토콜로써 유비쿼터스 센서 네트워크의 특징을 포함하고 있다. 본 연구에서는 BACnet의 데이터 링크 레이어의 확장된 무선 옵션으로 Zigbee를 포함하는 기술에 대해 연구하고 이를 기술한 실제 모델을 개발한다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.11 s.353
• /
• pp.78-84
• /
• 2006

This paper proposes a method to endow the mobility to the Zigbee protocol which is a short distance wireless communication technology among the standards of wireless sensor networks. The Zigbee has a low price, long life battery, simple structure and connectivity. So it is a suitable standard for the short distance wireless communication of $10m{\sim}70m$. As the Zigbee does not support the mobility, additional factors should be studied to deal adeptly with the diverse change in the real field. By solving the problem that the previous connection and binding table of the Zigbee end device should be reset due to the Zigbee end device address variation when the Zigbee end device moves from the present router to another router, this paper presents the method to communicate without data loss or disconnection.

• The KIPS Transactions:PartC
• /
• v.18C no.3
• /
• pp.195-198
• /
• 2011

Recent expansion of the ubiquitous environment and improvement of the USN give lots of U-healthcare systems. In this paper, we design and implement a wireless ECG measurement system that can send ECG signals among the sensors and collector. It can also give almost the same precision as a hospital ECG system with mobility. The most important fact of the mobile ECG system is the signal data connectivity among the sensors and device such as signal cables or wires. we can eliminate the signal cable through the Zigbee sender and collector via implementing Zigbee-SD communication system that can receive the ECG signal data. We also implement ECG app software on the smart phone that can analyze and show the data results directly. It can give lots of mobility and usability under ubiquitous environment and would be a very efficient wireless ECG system for U-healthcare service.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.101-104
• /
• 2008

현대에 컴퓨터를 기반으로 무선으로 데이터를 측정하고 제어하는 device들이 보편화 되어있으며, 낮은 가격으로 높은 성능을 낼 수 있는 device들이 각광 받고 있다. 그리고 산업 환경에서 유선 이용이 불가능한 곳이나 직접 사람이 들어갈 수 없는 위험한 장소와 거리 측정할 때 Zigbee 통신 Solution을 이용한다면 공간의 제약 없이 컴퓨터로 데이터를 분석 처리할 수 있다. Zigbee 통신은 기존의 RF나 bluetooth등에 비해 전력 소모에서 효율적이고 battery 사용을 장시간 사용할 수 있는 장점을 가지고 있다. 또한 시스템 구현 비용이 아주 저렴하기 때문에 네트워크에 많은 노드들을 설치 할 수 있다. 이에 본 논문에서 구현한 거리 측정 무선 송/수신 시스템은 여러 개의 LMC(Laser Measuring Control)와 이에 상응하는 여러 개의 Slave Zigbee에서 하나의 Master Zigbee 까지 무선으로 데이터를 송신한다. Master Zigbee는 LMC에서 측정한 데이터들을 수신 받아 컴퓨터로의 처리를 하고자 하였다.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.323-324
• /
• 2008

This study implemented the LED lighting control system using Zigbee Communication. We designed a desk lamp using LEDs. The PWM signals control LEDs using LED drivers. A desk lamp received PWM signals using Zigbee protocol to control LED Color, Color temperature and brightness. Zigbee protocol that have such several advantages to existent Home network system can upgrade more interface dimension.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.63 no.2
• /
• pp.69-73
• /
• 2014

In this paper, remote control and surveillance monitoring system of HID street-lamp using low-cost type of Zigbee communication module was developed. A plurality of capacitors with different capacity are attached to magnetic ballast for HID lamps. Changes in the amount of illumination can be adjusted by the changes in capacity so that the electric energy can be reduced. In Zigbee communication module, a ATmega128L microprocessor is used and in main CPU, ARM9 Core is used to construct a low-cost smart system. In surveillance monitoring systems, the system was configured to remote monitoring of presence of error in the lamp abnormalities, the status of leakage current and abnormalities of ballasts and capacitors and the validity of the proposed empirical experiment was confirmed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.3
• /
• pp.487-492
• /
• 2005

As the portable medical equipments consume the power and transmission of the information, they need the system to use long. Although the current wireless transform systems for medical equipments use Bluetooth protocol system, an electricity consumption is big because it uses long and there is the difficulty in the utility We designed a module using the Zigbee protocol which an electricity consumption is more small though a transmission speed is slower than Bluetooth and drew the plan the wireless transmit system for medical equipments to use long.